Rosslare AYC-FG4 Series User manual

AYC-FGx4 Family
Backlit, Waterproof
Convertible Reader / Controllers
Instruction Manual
Models:
AYC-F54
AYC-F64
AYC-G54
AYC-G64
August 2010

Ta b le o f C o nte nts
AYC -Fx4 a nd AYC -G x4 fa mily ma nua l Pa g e ii
Table of Contents
1. General Information ........................................................ 4
1.1 Introduction................................................................................ 4
1.2 Reader/Controller Types............................................................. 5
1.3 Box Content ............................................................................... 5
1.4 Ancillary Equipment ................................................................... 6
2. Technical Specifications .................................................. 7
2.1 Key Features............................................................................... 8
3. Installation..................................................................... 10
3.1 Mounting the AYC-Fx4 and AYC-Gx4....................................... 10
4. Wiring Instructions .......................................................... 11
5. Reader Functionality...................................................... 14
5.1 Transmit Mode ......................................................................... 14
5.2 Programming the AYC-Fx4/AYC-Gx4 Series ............................. 14
Selecting Keypad Transmission Format...............................................................16
Selecting Proximity Card Transmission Format.....................................................23
Changing the Programming Code ....................................................................24
Changing the Facility Code................................................................................25
Return to Factory Default Settings .......................................................................26
Replacing a Lost Programming Code ................................................................26
6. Controller Functionality................................................... 27
6.1 Normal, Secure, and Master Users........................................... 27
Normal User ........................................................................................................28
Secure User .........................................................................................................28
Master User..........................................................................................................28
6.2 Modes of Operation ................................................................ 28
Normal Mode .....................................................................................................28
Bypass Mode ......................................................................................................29
Secure Mode ......................................................................................................29
Changing the Modes of Operation ....................................................................29
6.3 Auxiliary Input & Output ............................................................ 31
6.4 Door Alarms.............................................................................. 31
6.5 Internal Case and Back Tamper.............................................. 31
6.6 Lockout Feature (Keypad / Card Tamper)............................... 31

Ta b le o f C o nte nts
AYC -Fx4 a nd AYC -G x4 fa mily ma nua lPa g e iii
6.7 Request to Exit (REX) Function .................................................. 32
6.8 Secure Application Appurtenances ........................................ 32
6.9 Programming the AYC-Fx4/AYC-Gx4 ....................................... 33
Programming Menu............................................................................................33
Entering Programming Mode..............................................................................34
Exiting Programming Mode.................................................................................34
Changing Lock Strike Code ................................................................................34
Changing Auxiliary Code....................................................................................35
Changing the Programming Code ....................................................................36
Changing the Normal / Secure Code.................................................................36
Changing the Normal / Bypass Code and Door Chime Settings ........................37
Setting Fail Safe/Secure Operation, Tamper Siren and Lock Strike Release Time 37
Defining the Auxiliary Input and Output...............................................................38
Quick Reference Guide for Auxiliary Mode Setting..............................................40
Detailed Reference Guide..................................................................................41
Setting the Lockout Feature ................................................................................45
Enrolling Primary and Secondary Codes.............................................................46
Deleting Primary and Secondary Codes.............................................................49
Relay Codes Assignment ....................................................................................51
Relay Code Assignment using Search Method...................................................52
Pin Code Length / Factory Default Settings .........................................................53
Replacing a Lost Programming Code ................................................................54
Replacing a Lost Normal / Secure Code ............................................................54
Appendix A.Limited Warranty .......................................... 55
Appendix B.Technical Support ........................................ 57

G e ne ra l Info rma tion
AYC -Fx4 a nd AYC -G x4 fa mily ma nua l Pa g e 4
1. General Information
1.1 Introduction
The AYC -Fx4 a nd AYC -G x4 se rie s a re a wa te rp ro o f, sta nd a lo ne ,
c o nve rtib le inte g ra te d re a d e r a nd c o ntro lle r. The AYC -Fx4 a nd
AYC -G x4 se rie s a uto m a tic a lly de te rm ine s whe the r to func tio n a s a
re a d e r o r a s a c o ntro lle r. If the unit is c o nne c te d to a sta nd a rd
a c c e ss c o ntro l unit, the n it func tio ns a s a re a d e r. If the unit is
c o nne c te d to Ro ssla re 's se c ure a p p lic a tio n a pp urte na nc e s suc h
a s the PS-A25T, PS-C 25To r PS-C25TU, it func tio ns a s a se c ure d
c o ntro lle r.
Fo r info rm a tio n o n ho w the unit func tio ns a s a re a d e r, se e Re a de r
Func tio na lity o n p a g e 14.
Fo r info rma tio n o n ho w the unit func tio ns a s a c o ntro lle r, se e
C o ntro lle r Func tio na lity o n p a g e 27.
All o f the units a re suita b le fo r ind o o r o r o utd o o r mo unting .
As a c o ntro lle r, the units a c c e p t up to 500 use rs, a nd a llo w e ntry
via a p e rso na l id e ntific a tio n numb e r (PIN) a nd / o r b y p re se nting a
p ro ximity c a rd .
The p in c o d e le ng th fo r the c o ntro lle r ha s se ve ra l o p tio ns. The p in
c o d e le ng th c a n b e a se t num b e r o f 4, 5 o r 6 d ig its o r it c a n b e a
4-8 d ig its o p tio n.
This m a nua l c o nta ins the fo llo wing info rma tio n:
•Insta lla tio n
•Wiring instruc tio ns
•O p e ra tio n Instruc tio ns

G e ne ra l Info rm a tio n
AYC -Fx4 a nd AYC -G x4 fa mily ma nua lPa g e 5
1.2 Reader/Controller Types
The d iffe re nt typ e s o f units d e sc rib e d in this m a nua l a re :
•AYC -F54 - PIN o nly
•AYC -F64 - PIN a nd Pro xim ity c a rd
•AYC -G 54 – Mullio n-Bo x PIN o nly
•AYC -G 64 - Mullio n-Bo x PIN a nd Pro ximity c a rd
Ba c klig ht Ke yp a d Type Pro xim ity
A YC -F54

3X4 Sta nd a rd

A YC -F64

3X4 Sta nd a rd

A YC -G 54

2X6 Mullio n

A YC -G 64

2X6 Mullio n

Up o n p o w e r-o n re se t, the AYC -Fx4 / AYC -G x4 se a rc he s fo r the
p re se nc e o f Ro ssla re 's se c ure a p p lic a tio n a p p urte na nc e s. If a
se c ure a p p lic a tio n a pp urte na nc e s is d e te c te d , the n the AYC -Fx4
/ AYC -G x4 a re a uto ma tic a lly c o nfig ure d a s a se c ure a c c e ss
c o ntro l unit. This is ind ic a te d b y two sho rt b e e p s. If the se c ure d
c o ntro lle r is no t d e te c te d , it is a uto ma tic a lly c o nfig ure d a s a
re a d e r, ind ic a te d b y o ne sho rt b e e p .
1.3 Box Content
Be fo re b e g inning ve rify tha t a ll o f the fo llo wing is in the b o x. If
a nything is missing , p le a se re p o rt the d isc re p a nc y to yo ur ne a re st
Ro ssla re o ffic e .
•O ne AYC -Fx4 / AYC -G x4 unit
•Insta lla tio n kit
•Insta lla tio n a nd o p e ra ting instruc tio ns
•se c ure a p p lic a tio n a pp urte na nc e (o p tio na l fo r c o ntro lle r
a p p lic a tio ns)

G e ne ra l Info rma tion
AYC -Fx4 a nd AYC -G x4 fa mily ma nua l Pa g e 6
1.4 Ancillary Equipment
The fo llo wing e q uip me nt is re q uire d to c o mp le te yo ur insta lla tio n:
Reader
•C o m pa tib le ho st c o ntro lle r (no t supp lie d ) - UL liste d a c c e ss
c o ntro l unit, i.e ., mo d e l AC-215U
Controller
•Se c ure Applic a tio n App urte na nc e s
suc h a s the PS-A25T, PS-C 25To r PS-C 25TU se c ure c o ntro lle rs
This unit c o nne c ts to the fo llo wing :
oEle c tric lo c k strike me c ha nism o r a m a g ne tic lo c k
d e vic e , whic h imp le me nts fa il sa fe (p o we r to lo c k) o r
fa il se c ure (p o we r to o p e n) func tio ns.
oRe q ue st to Exit (REX) b utto n—no rma lly o p e n typ e .
Switc h is c lo se d whe n p re sse d .
oDo o r mo nito r switc h.
Ro ssla re a c c e sso rie s c a n b e fo und o n w ww .ro ssla re se c urity.c o m .

Te c hnic a l Spe c ific a tions
AYC -Fx4 a nd AYC -G x4 fa mily ma nua lPa g e 7
2. Technical Specifications
Specifications
AYC-F54
AYC-F64
AYC-G54
AYC-G64
Ele c tric a l C ha ra c te ristic s
Po we r sup ply typ e
Line a r typ e – re c o m m e nd e d
O pe ra ting vo lta g e
ra ng e
5 - 16VDC (w he n use d a s a c o ntro lle r, p ro vid e d b y
the se c ure a p p lic a tio n a p p urte na nc e )
Inp ut c urre nt sta nd b y
(12 VDC )
75mA 105m A 75m A 105mA
Inp ut c urre nt m a x
(16 VDC )
110m A 140m A 110m A 140m A
LED c o ntro l inp ut
Dry c o nta c t N.O .
Ta m p e r o utp ut
O p e n c o lle c to r, a c tive lo w , 32m A m a x sink c urre nt
Ca b le d ista nc e to
ho st c o ntro lle r
Up to 500ft (150 m e te rs) using a n 18AWG c a b le
Ma x pro xim ity c a rd
re a d ra ng e *
N/ A
3.0 inc he s
(80mm)
N/ A
3.0 inc he s
(80mm)
Pro xim ity c a rd
m o d ula tio n
N/ A ASK a t 125
KHz
N/ A ASK a t 125
KHz
Pro xim ity c a rd
c o m p a tib ility
N/ A EM c a rd s N/ A EM c a rd s
C a rd Tra nsm it form a t
(Re a d e r)
N/ A 26-b it
Wie g a nd ,
o r C lo c k &
Da ta
N/ A 26-b it
Wie g a nd , o r
C lo c k &
Da ta
Ke yp a d Tra nsm it
Fo rm a t (Re a d e r)
Pro g ra m ma b le PIN c o d e fo rm a ts
LED ind ic a to rs
Tw o tri-c o lo re d LEDs
C o m m unic a tio n
Da ta 1/ C 1, Da ta 0/ C 2—o p e n c o lle c to r, 5V
te rm ina tio n

Te c hnic a l Spe c ific a tio ns
AYC -Fx4 a nd AYC -G x4 fa mily ma nua l Pa g e 8
Enviro nm e nta l C ha ra c te ristic s
O p e ra ting te m p .
ra ng e
-31to 151° F (-35 to 66° C )
O p e ra ting hum id ity
0 – 95% (no n-c o nd e nsing )
O utd oo r usa g e
We a the r-re sista nt, m e e ts IP-65, e p o xy p o tte d ,
suita b le fo r o utd o o r use
Me c hanic a l
Size (He ig ht xWid th x
De pth)
4.72x2.99x0.83 inc he s
(120x76x21 mm)
5.39x1.73x0.83 inc he s
(137x44x21 mm )
We ig ht
0.474 lb (215g ) 0.353 lb (160g )
*Me a sure d using Ro ssla re p ro xim ity c a rd (AT-14) o r e q uiva le nt. Ra ng e a lso
d e p e nd s o n e le c tric a l e nviro nme nt a nd p ro ximity to me tal.
2.1 Key Features
The ke y fe a ture s fo r the AYC -Fx4 a nd AYC -G x4 se rie s a re :
•Built-In Pro ximity C a rd Re a d e r (125 KHz ASK Mo d ula tio n)
(fo r 64 se rie s o nly)
•Re d b a c klit ke yp a d
•O p tic a l b a c k ta mp e r se nso r a nd o p e n c o ntro lle r ta mp e r
o utp ut.
•Lo c ko ut fe a ture o n wro ng e ntrie s (Ke yp a d / C a rd Ta mp e r)
•Inte rna l b uzze r p ro vid e s a ud ib le inte rfa c e fe e d b a c k
•Two sta tus / p ro g ra mm ing Inte rfa c e LEDs (tri-c o lo re d )
•Fully p o tte d c o nstruc tio n fo r o utd o o r use
•C o m e s with m o unting te mp la te fo r e a sie r insta lla tio n
•C o m e s with a n insta lla tio n kit tha t inc lud e s a se c urity sc re w
a nd a se c urity sc re w to o l

Te c hnic a l Spe c ific a tio ns
AYC -Fx4 a nd AYC -G x4 fa mily ma nua lPa g e 9
Reader
•Pro g ra mma b le ke yp a d tra nsm issio n fo rm a t
•LED c o ntro l inp ut
•Pro g ra mma b le fa c ility c o d e
•Pro g ra m ma b le Pro xim ity C a rd Tra nsmissio n Fo rm a t
oC lo c k & Da ta
o26-Bit Wie g a nd
oC a rd + PIN
Controller
•Bi-dire c tio na l se c ure c o mmunic a tio n with Ro ssla re s’ se c ure
a p p lic a tio n a p p urte na nc e
•Thre e Use r Le ve ls
oNo rm a l Use r
oSe c ure Use r
oMa ste r Use r
•"C o d e Se a rc h" fe a ture tha t he lp s ma ke m a inta ining use r
c o d e s e a sie r
•Thre e Mo d e s o f O pe ra tio n
oNo rma l Mo d e
oByp a ss Mo d e
oSe c ure Mo d e
•Re q ue st-to -Exit (REX) sig na l fro m Ro ssla re s’ se c ure
a p p lic a tio n a p p urte na nc e
•C him e Be ll a nd Sire n fe a ture s a re a va ila b le with se c ure
a p p lic a tio n a p p urte na nc e
•Pro g ra mm a b le Lo c k Strike Re le a se , Sire n, a nd Ala rm De la y
time rs
•Pro g ra m ma b le Auxilia ry inp ut with ve rsa tile func tio ns.
•Pro g ra mm a b le Auxilia ry o utp ut func tio ns
•Pro g ra mm a b le PIN c o d e le ng th.

Insta lla tio n
AYC -Fx4 a nd AYC -G x4 fa mily ma nua l Pa g e 10
3. Installation
3.1 Mounting the AYC-Fx4 and AYC-Gx4
Be fo re sta rting , se le c t the lo c a tio n to m o unt the AYC -Fx4 / AYC -
Gx4. This lo c a tio n sho uld b e a t sho uld e r he ig ht. Drill ho le s into the
b a c k o f the unit a c c o rd ing to ho w yo u w a nt to m o unt the AYC -
Fx4/AYC -G x4. Fo r US G a ng Bo x insta lla tio n, the re a re two -ho le
ind ic a to rs o n the b a c k o f the c o ve r sp e c ific a lly a lig ne d fo r the US
G a ng Bo x (A, in d ia g ra m b e lo w).
Figure 1 Drilling mounting holes
Whe n the unit is use d a re a de r, ro ute the inte rfa c e c a b le fro m the
AYC -Fx4/AYC -G x4 to the C o ntro lle r. Whe n the unit is use d a s a
se c ure d c o ntro lle r, ro ute the inte rfa c e c a b le fro m the AYC -Fx4 /
AYC -G x4 to Ro ssla re s’ se c ure a p p lic a tio n a p p urte na nc e .
A line a r typ e p o we r sup p ly is re c o m me nd e d , whe n using the unit
a s a c o ntro lle r.
Sc re w the AYC -Fx4/AYC -G x4 b a c k c o ve r to its m o unting lo c a tio n.
Re turn the AYC -Fx4/AYC -G x4 fro nt c o ve r to the m o unte d b a c k
p la te .
Se c ure the fro nt c o ve r b y using the sup plie d se c urity sc re w in the
c o ntro lle rs Insta lla tio n Kit. An L-Sha p e d to o l is pro vid e d fo r use
whe n tig hte ning the se c urity sc re w .
AYC-Fx4
AYC-Gx4

Wiring Instruc tio ns
AYC -Fx4 a nd AYC -G x4 fa mily ma nua lPa g e 11
4. Wiring Instructions
The unit is sup p lie d with a 22-inc h p ig ta il, ha ving a 6-c o nd uc to r
c a b le . To c o nne c t the unit to the c o ntro lle r, p e rfo rm the fo llo wing :
Pre p a re the unit's c a b le b y c utting the c a b le ja c ke t b a c k 1¼
inc he s a nd strip the wire ½ inc h. Pre p a re the c o ntro lle r c a b le b y
c utting the c a b le ja c ke t b a c k 1¼ inc he s a nd strip the wire ½ inc h.
Sp lic e the unit’s p ig ta il wire s to the c o rre sp o nd ing c o ntro lle r wire s
a nd c o ve r e a c h c o nne c tio n.
Re fe r to the wire c o lo r ta ble b e lo w, a nd to the w iring d ia g ra m s
p ro vid e d o n the fo llo wing p a g e s.
Reader
Controller
Color
Functionality
5~16 VDC
5~16 VDC
Re d
+DC Inp ut
Shie ld / G ro und Shie ld / G ro und Bla c k G ro und
Da ta 1 / C lo c k
C 1
White
C o mm unic a tio n
Da ta 0 / Da ta
C 2
G re e n
C o mm unic a tio n
LEDC TL
AUX. IN
Bro w n
LED Co ntro l / Auxilia ry Inp ut
Ta m p e r
Ta m p e r
Purp le
Ta m p e r
If the ta m p e r o utp ut is use d , c o nne c t the p urp le wire to the
c o rre c t inp ut o n the c o ntro lle r whe n use d a s a re a d e r, o r to a
zo ne inp ut o f a n intrud e r a la rm syste m whe n use d a s a c o ntro lle r.
Trim a nd c o ve r a ll unuse d c o nd uc to rs.
No te :
•The ind ivid ua l w ire s fro m the unit a re c o lo r-c o d e d
a c c o rd ing the Wie g a nd sta nd a rd .
•Whe n using a se p a ra te Po w e r Sup p ly fo r the Re a d e r, this
Po we r Sup p ly a nd tha t o f the C o ntro lle r must ha ve a
c o m m o n g ro und .
•The Re a d e r’ s c a b le shie ld w ire sho uld p re fe ra b ly b e
a tta c he d to a n e a rth g ro und , o r a sig na l g ro und
c o nne c tio n a t the p a ne l, o r p o we r sup p ly e nd o f the c a b le .
This c o nfig ura tio n is b e st fo r shie ld ing the Re a d e r c a b le fro m
e xte rna l inte rfe re nc e

Wiring Instruc tio ns
AYC -Fx4 a nd AYC -G x4 fa mily ma nua l Pa g e 12
Wiring d ia g ra m # 1 (b e lo w) sho w s the wiring fo r the C o ntro lle r
Ap p lic a tio n using a Dua l Re la y Se c ure Ap p lic a tio n Ap p urte na nc e .
Figure 2 Controller Application Wiring Diagram #1
Wiring d ia g ra m # 2 (b e lo w) sho w s the a uxilia ry o utp ut c o nne c tio n
using inte rna l p o we r.
Figure 3 Controller Application Wiring Diagram #2
Rosslare
PS-X25
Rosslare
PS-X25

Wiring Instruc tio ns
AYC -Fx4 a nd AYC -G x4 fa mily ma nua lPa g e 13
Wiring d ia g ra m # 3 (b e lo w) sho w s the a uxilia ry o utp ut c o nne c tio n
using the e xte rna l p o we r.
Figure 4 Controller Application Wiring Diagram #3
Figure 5: Reader Application Wiring Diagram #4
Rosslare
PS-X25

Re a de r Func tio na lity
AYC -Fx4 a nd AYC -G x4 fa mily ma nua l Pa g e 14
Mode/Transmit
Door/Program
Red
5. Reader Functionality
The AYC -Fx4/AYC -G x4 se rie s c a n func tio n b o th a s a re a d e r a nd a s
a c o ntro lle r. If the unit is c o nne c te d to sta nd a rd a c c e ss c o ntro lle r,
it func tio ns a s a re a de r, ind ic a te d b y o ne b e e p im me d ia te ly a fte r
p o w e r-o n re se t.
The fo llo wing e xp la ins ho w the AYC -Fx4/AYC -G x4 se rie s func tio ns
a s a re a d e r.
5.1 Transmit Mode
Whe n the AYC -Fx4/AYC -G x4 is in Tra nsmit Mo d e , it is re a dy to
re c e ive d a ta fro m a p re se nte d Pro xim ity C a rd o r a n e nte re d PIN
c o d e .
Whe n the re a d e r is in Tra nsmit
Mo d e , the Tra nsm it LED is re d a nd
the Pro g ra m LED is o ff.
Whe n a Pro ximity C a rd o r Ke yb o a rd e ntry is b e ing tra nsm itte d , the
Tra nsm it LED will fla sh g re e n.
Ke yb o a rd d a ta c a n b e se nt via o ne o f e ig ht d iffe re nt Ke yp a d
Tra nsmissio n Fo rma ts. Fo r mo re info rm a tio n, se e Se le c ting Ke yp a d
Tra nsmissio n Fo rma t o n p a g e 16.
Pro ximity C a rd s p re se nte d to the re a d e r a re a lw a ys se nt in e ithe r
26-Bit Wie g a nd , C lo c k & Da ta o r, Wie g a nd C a rd + PIN fo rm a t. Se e
Se le c ting Pro ximity C a rd Tra nsmissio n Fo rm a t o n p a g e 23 fo r m o re
info rm a tio n.
5.2 Programming the AYC-Fx4/AYC-Gx4 Series
Pro g ra mming the AYC -Fx4/AYC -G x4 se rie s is d o ne so le ly via the
unit's ke yp a d d rive n Pro g ra mm ing Me nu Syste m. To re a c h the

Re a de r Func tio na lity
AYC -Fx4 a nd AYC -G x4 fa mily ma nua lPa g e 15
Mode/Transmit
Door/Program
Red
Pro g ra mm ing Me nu Syste m the AYC -Fx4/AYC -G x4 must first b e
p la c e d into Pro g ra m ming Mo d e . During the AYC -Fx4/AYC -G x4
ma nufa c turing p ro c e ss c e rta in c o d e s a nd se tting s a re p re -
p ro g ra m me d . The se se tting s a re the c a lle d the "De fa ult Fa c to ry
Se tting s". The ta b le b e lo w sho ws the na m e s o f a ll the AYC -
Fx4/AYC -G x4 Me nus.
Programming Menu
De fa ult Fa c to ry Se tting s a re m a rke d b y a "*" sig n.
Menu Description
Default
1
Se le c ting Ke ypa d Tra nsmissio n Fo rm a t
Sing le Ke y, 6-Bit Wie g a nd (Ro ssla re Fo rm a t)
Sing le Ke y, 6-Bit Wie g a nd with Nib b le + Pa rity Bits
Sing le Ke y, 8-Bit Wie g a nd , Nib b le s C o m ple m e nte d
4 Ke ys Bina ry + Fa c ility C o d e , 26-Bit Wie g a nd
1 to 5 Ke ys + Fa c ility C o d e , 26-Bit Wie g a nd
6 Ke ys BC D a nd Pa rity Bits, 26-Bit Wie g a nd
Sing le Ke y, 3x4 Ma trix Ke yp a d
1 to 8 Ke ys BC D, C lo c k & Da ta
*
2
Se le c ting C a rd Tra nsm issio n Fo rm a t
26-Bit Wie g a nd
C lo c k & Da ta
Wie g a nd C a rd + PIN
*
3
C ha ng ing the Pro g ra m ming Co d e
1234
4 C ha ng ing the Fa c ility C o de 0
0
Re turn to Fa c to ry De fa ult Se tting s
Entering Programming Mode
1) Pre ss the # ke y 4 tim e s.
•Tra nsm it LED will turn o ff.
•Pro g ra m LED will turn re d .
2) Ente r yo ur 4 d ig it Pro g ra mming Co d e .
If the Pro g ra mming C o d e is
va lid , the d o o r LED will turn
?
?
?
?
Mode/Transmit
Door/Program
Green

Re a de r Func tio na lity
AYC -Fx4 a nd AYC -G x4 fa mily ma nua l Pa g e 16
Mode/Transmit
Door/Program
Red
g re e n a nd the AYC -Fx4 / AYC -G x4 will b e in Pro g ra m ming
Mo d e .
No te :
•The fa c to ry 4-d ig it Pro g ra mm ing C o d e is 1234.
•If a Pro g ra mming C o d e is no t e nte re d within 30 se c o nd s,
the AYC -Fx4/ AYC -G x4 w ill re turn to Tra nsmit Mo de .
Exiting Programming Mode
1) To e xit the Pro g ra mm ing Mo d e a t a ny tim e p re ss # :
•Yo u will he a r a b e e p
•The Pro g ra m LED will b e o ff
•The Tra nsm it LED will turn re d
2) This ind ic a te s tha t the AYC -Fx4/AYC -G x4 ha s re turne d to
Tra nsm it Mo d e
3) Wro ng e ntrie s m a y re se t the re a d e r b a c k to Tra nsm it Mo d e .
While in Pro g ra mm ing Mo d e if no ke y is pre sse d fo r 30 se c o nd s
the AYC -Fx4/AYC -G x4 will e xit Pro g ra m ming Mo d e a nd re turn
to Tra nsmit Mo d e .
5.2.1. Selecting Keypad Transmission Format
The AYC -Fx4/AYC -G x4 ha s e ig ht diffe re nt ke yp a d tra nsmissio n
fo rm a ts to se le c t fro m . Fo llo w the ste p s b e lo w to se le c t the
a p p ro p ria te ke yp a d tra nsm issio n fo rm a t tha t yo u wish to use .
1) Ente r Pro g ra m ming Mo d e .
2) Pre ss “ 1” to e nte r.
•The Tra nsm it LED will turn
Re d .
3) Ente r the a p p ro p ria te o p tio n no . fo r the
ke yp a d tra nsmissio n fo rma t tha t yo u wish
to se le c t (se e ta b le b e lo w ).
If a n inc o rre c t o p tio n no . is e nte re d the re a d e r will re turn to
1
?
Mode/Transmit
Door/Program
Green
Mode/Transmit
Door/Program
Red
Green

Re a de r Func tio na lity
AYC -Fx4 a nd AYC -G x4 fa mily ma nua lPa g e 17
Tra nsm it Mo d e a nd the ke yp a d tra nsm issio n fo rma t will re m a in
unc ha ng e d
4) Lo o k o n the ne xt p a g e fo r mo re info rm a tio n o n ke yp a d
tra nsmissio n fo rma ts.
5) Syste m re turns to Tra nsmit Mo d e .
•Yo u will he a r thre e b e e p s.
•The Pro g ra m LED will turn o ff
•The Tra nsm it LED will turn re d
No te :
•O nly o ne ke yp a d tra nsmissio n fo rm a t c a n b e a c tive a t a ny
o ne time .
•Whe n using the ke yp a d tra nsm issio n fo rma t "1 to 8 ke ys
BC D, C lo c k & Da ta " (O p tio n 8) a n a d d itio na l inp ut is
re q uire d to sp e c ify the numb e r o f ke ys in the PIN c o d e .
Keypad Transmission Format Option Number
Se e the ta b le b e lo w to d e te rmine the O ptio n Numb e r fo r the
Ke yp a d Tra nsm issio n Fo rma t yo u wish to se le c t
Keypad Transmission Format
Option Number
Sing le Ke y, 6-Bit Wie g a nd (Ro ssla re Fo rm a t)
1*
Sing le Ke y, 6-Bit Wie g a nd with Nib b le + Pa rity Bits 2
Sing le Ke y, 8-Bit Wie g a nd , Nib b le s C o m p le m e nte d
3
4 Ke ys Bina ry + Fa c ility C o d e , 26-Bit Wie g a nd
4
1 to 5 Ke ys + Fa c ility C o d e , 26-Bit Wie g a nd
5
6 Ke ys BC D a nd Pa rity Bits, 26-Bit Wie g a nd
6
Sing le Ke y, 3x4 Ma trix Ke yp a d
7
1 to 8 Ke ys BC D, C lo c k & Da ta Sing le Ke y
8
* O p tio n 1 is the d e fa ult fa c to ry se tting .
Mo re info rm a tio n o n e a c h o f the d iffe re nt ke yp a d tra nsmissio n
fo rm a ts is a va ila b le b e lo w a nd o n the fo llo wing p a g e s.
Mode/Transmit
Door/Program
Red

Re a de r Func tio na lity
AYC -Fx4 a nd AYC -G x4 fa mily ma nua l Pa g e 18
Option 1: Single Key, 6-Bit Wiegand (Rosslare Format)
Ea c h ke y p re ss imm e d ia te ly se nd s 4 b its with 2 p a rity b its a d d e d .
Eve n p a rity fo r the first 3 b its a nd o d d p a rity fo r the la st 3 b its.
0= 1 1010 0 ="A" in He xa d e c im a l
6= 1 0110 0
1= 0 0001 0
7= 1 0111 1
2= 0 0010 0
8= 1 1000 1
3= 0 0011 1
9= 1 1001 0
4= 1 0100 1
*= 1 1011 1 ="B" in He xa de c im a l
5= 1 0101 0
# = 0 1100 1 ="C " in He xa d e c im al
Option 2: Single Key, 6-Bit Wiegand Nibble and Parities
Ea c h ke y p re ss imm e d ia te ly se nd s 4 b its with 2 p a rity b its a d d e d .
Eve n p a rity fo r the first 3 b its a nd o d d pa rity fo r the la st 3 b its.
0 = 0 0000 1 6 = 1 0110 0
1 = 0 0001 0
7 = 1 0111 1
2 = 0 0010 0
8 = 1 1000 1
3 = 0 0011 1
9 = 1 1001 0
4 = 1 0100 1 * = 1 10100 = "A" in He xa d e c im a l
5 = 1 0101 0
# = 1 1011 1 = "B" in He xa d e c im al
Option 3: Single Key, 8-Bit Wiegand Nibbles Complemented
Inve rts the m o st sig nific a nt b its in the me ssa g e le a ving the le a st 4
sig nific a nt b its a s Bina ry-C o d e d De c im a l (BC D) re p re se nta tio n o f
the ke y. The ho st syste m re c e ive s a n 8-b it me ssa g e .
0 = 11110000
6 = 10010110
1 = 11100001
7 = 10000111
2 = 11010010
8 = 01111000
3 = 11000011 9 = 01101001
4 = 10110100
* = 01011010 = "A" in He xa d e c im a l
5 = 10100101
# = 01001011 = "B" in He xa d e c im a l

Re a de r Func tio na lity
AYC -Fx4 a nd AYC -G x4 fa mily ma nua lPa g e 19
Option 4: 4 Keys Binary +Facility Code, 26-Bit Wiegand
Buffe rs 4 ke ys a nd o utp uts ke yp a d d a ta with a thre e d ig it fa c ility
c o d e like a sta nd a rd 26-Bit c a rd o utp ut.
The fa c ility c o d e is se t in Pro g ra mming Me nu numb e r fo ur a nd
c a n b e in the ra ng e 000 to 255. The fa c to ry d e fa ult se tting fo r the
fa c ility c o d e is 000. (Se e C ha ng ing the Fa c ility C o d e o n p a g e 25
fo r m o re info rm a tio n).
The ke yp a d PIN c o d e is 4-d ig it lo ng a nd c a n ra ng e b e twe e n 0000
a nd 9999. O n the fo urth ke y p re ss o f the 4 d ig it PIN c o d e , the d a ta
is se nt a c ro ss the Wie g a nd Da ta line s a s b ina ry d a ta in the sa me
fo rm a t a s a 26-Bit C a rd .
If the "*" ke y o r the "# " ke y a re p re sse d d uring PIN c o d e e ntry, the
ke yp a d will c le a r the PIN c o d e e ntry b uffe r, g e ne ra te a b e e p a nd
is re a d y to re c e ive a ne w 4 d ig it ke yp a d PIN c o d e .
If the e ntry o f the 4 d ig its ke yp a d PIN c o d e is d isrup te d a nd no
numb e r ke y is p re sse d within 5 se c o nd s, the ke yp a d will c le a r the
PIN c o d e e ntry b uffe r, g e ne ra te a b e e p a nd is re a dy to re c e ive a
ne w 4 d ig its ke yp a d PIN c o d e .
(EP) FFFF FFFF AAAA AAAA AAAA AAAA (O P)
Whe re :
EP = Eve n p a rity fo r first 12 b its.
O P = O d d p a rity fo r la st 12 b its.
F = 8-Bit Fa c ility C o d e .
A = 16-Bit c o d e g e ne ra te d fro m ke yb o a rd .