Rosslare AYC-Ex5 User manual

AYC-Ex5
Ultra-slim Piezo Vandal Resistant
Convertible Reader / Controller family
Instruction Manual
June 2007

Table of Contents
AYC-Ex5 family manual Page ii
Table of Contents
1. General Information.....................................................................4
1.1 Introduction.......................................................................................... 4
1.2 Reader/Controller Types...................................................................... 5
1.3 Box Content......................................................................................... 5
1.4 Ancillary Equipment............................................................................ 6
2. Technical Specifications ............................................................... 7
2.1 Key Features ........................................................................................ 8
3. Installation ...................................................................................10
3.1 Mounting the AYC-Ex5..................................................................... 10
4. Wiring Instructions.....................................................................11
5. Reader Functionality ..................................................................15
5.1 Transmit Mode................................................................................... 15
5.2 Programming the AYC-Ex5 Series ................................................... 15
Selecting Keypad Transmission Format........................................................................... 18
Selecting Proximity Card Transmission Format .............................................................. 25
Changing the Programming Code .................................................................................... 27
Cha ging the Facility Code .............................................................................................. 27n
5.3 Setting the Backlight.......................................................................... 28
Return to Factory Default Settings................................................................................... 28
Replacing a Lost Programming Code............................................................................... 29
6. Controller Functionality.............................................................30
6.1 Normal, Secure, and Master Users .................................................... 30
Normal User...................................................................................................................... 31
Secure User....................................................................................................................... 31
Master User....................................................................................................................... 31
6.2 Modes of Operation........................................................................... 32
Normal Mode.................................................................................................................... 32
Bypass Mode .................................................................................................................... 32
Secure Mode..................................................................................................................... 32
Cha ging the Modes of Operation.................................................................................... 33n
6.3 Auxiliary Input & Output .................................................................. 34
6.4 Door Alarms....................................................................................... 34
6.5 Internal Case and Back Tamper......................................................... 34
6.6 Lockout Feature (Keypad Tamper) ................................................... 35

Table of Contents
AYC-Ex5 family manualPage iii
6.7 Request to Exit (REX) Function........................................................ 35
6.8 Secure Application Appurtenances.................................................... 36
6.9 Programming the AYC-Ex5.............................................................. 36
Programming Menu.......................................................................................................... 37
Entering Programming Mode........................................................................................... 37
Exiting Programming Mode............................................................................................. 38
Changing Lock Strike Code.............................................................................................. 38
Changing Auxiliary Code................................................................................................. 39
Changing the Programming Code .................................................................................... 39
Changing the Normal / Secure Code................................................................................ 40
Changing the Normal / Bypass Code and Door Chime Settings..................................... 40
Setting Fail Safe/Secure Operation, Tamper Siren and Lock Strike Release Time ......... 41
Defining the Auxiliary Input and Output.......................................................................... 42
Quick Reference Guide for Auxiliary Mode Setting........................................................ 44
Detailed Reference Guide................................................................................................. 45
Setting the Lockout Feature.............................................................................................. 50
Setting the backlight behavior.......................................................................................... 51
Enrolling Primary and Secondary Codes.......................................................................... 51
Deleting Primary and Secondary Codes........................................................................... 54
Relay Codes Assignment.................................................................................................. 56
Relay Code Assignment using Search Method ................................................................ 57
Pin Code Length / Factory Default Settings..................................................................... 58
Replacing a Lost Programming Code............................................................................... 59
Exiting Secure mode if Normal / Secure Code was Lost ................................................. 59
Appendix A. Limited Warranty..................................................60
Appendix B. Technical Support.................................................. 62

General Information
AYC-Ex5 family manual Page 4
1. General Information
1.1 Introduction
The AYC-Ex5 family is an Ultra-slim, vandal-resistant, Piezo Mullion
Keypad, integrated convertible readers and controllers.
The AYC-Ex5 automatically determines whether to function as a
reader or as a controller. If the unit is connected to a standard
access control unit, then it functions as a reader. If the unit is
connected to Rosslare's secure application appurtenances such
as the PS-A25T, PS-C25T or PS-C25TU, it functions as a secured
controller.
For information on how the unit functions as a reader, see Reader
Functionality on page 15.
For information on how the unit functions as a controller, see
Controller Functionality on page 30.
The unit is vandal resistant and water resistant, suitable for indoor
or outdoor mounting.
As a controller, the units accept up to 500 users, and allow entry
via a personal identification number (PIN).
The pin code length for the controller has several options. The pin
code length can be a set number of 4, 5 or 6 digits or it can be a
4-8 digits option.
This manual contains the following information:
•Installation
•Wiring instructions
•Operation Instructions

General Information
1.2 Reader/Controller Types
The different types of units described in this manual are:
•Type 55 has PIN only
•Type 65 has PIN and Proximity card
Backlight Keypad Type Proximity
AYC-E55  piezoelectric

AYC-E65B  Piezoelectric

Upon power-on reset, the AYC-Ex5 searches for the presence of
Rosslare's secure application appurtenances. If a secure
application appurtenance is detected, then the AYC-Ex5 is
automatically configured as a secure access control unit. This is
indicated by two short beeps. If the secured controller is not
detected, it is automatically configured as a reader, indicated by
one short beep.
1.3 Box Content
Before beginning verify that all of the following is in the box. If
anything is missing, please report the discrepancy to your nearest
Rosslare office.
•One AYC-E55 or AYC-E65B unit
•Installation kit
•Installation and operating instructions
•secure application appurtenance (optional for controller
applications)
AYC-Ex5 family manualPage 5

General Information
AYC-Ex5 family manual Page 6
1.4 Ancillary Equipment
The following equipment is required to complete your installation:
Reader
•Compatible host controller (not supplied)- UL listed access
control unit, i.e., model AC-215U
Controller
•Secure Application Appurtenances
such as the PS-A25T, PS-C25T or PS-C25TU secure controllers
This unit connects to the following:
oElectric lock strike mechanism or a magnetic lock
device, which implements fail safe (power to lock) or
fail secure (power to open) functions.
oRequest to Exit (REX) button—normally open type.
Switch is closed when pressed.
oDoor monitor switch.
Rosslare accessories can be found on www.rosslaresecurity.com.

Technical Specifications
2. Technical Specifications
Specifications AYC-E55 AYC-E65B
Electrical Characteristics
Power supply type Linear type – recommended
Operating voltage
range 5 - 16VDC (when used as a controller, provided by the secure application
appurtenance)
Input current standby 15mA@12VDC 92mA@12VDC
max Input current 40mA@16VDC 105mA@16VDC
LED control input Dry contact N.O.
Tamper output Open collector, active low, 30mA max
sink current
Cable distance to host
controller Up to 500ft (150 meters) using an 18AWG cable
Max proximity card read
range* N/A 1.575 inch (40mm )
Proximity card
modulation N/A ASK at 125 KHz
Proximity card
compatibility N/A EM cards
Card Transmit format
(Reader) N/A 26-bit Wiegand, or Clock & Data
Keypad Transmit Format
(Reader) Programmable PIN code formats
LED indicators Two tri-colored LEDs
Communication Data1/C1, Data0/C2—open collector, 5V
termination
AYC-Ex5 family manualPage 7

Technical Specifications
AYC-Ex5 family manual Page 8
Specifications AYC-E55 AYC-E65B
Environmental Characteristics
Operating temp. range -22 to 150° F (-30 to 65° C)
Operating humidity 0 – 95% (non-condensing)
Outdoor usage Weather-resistant, meets IP-68, epoxy
potted, suitable for outdoor use
Mechanical
Size
(Height x Width x Depth) 155 x 44 x 6.5 mm 6.1x1.73x0.256 inch 155 x 44 x 9mm 6.1x1.73x0.354 inch
Weight 120g (0.265 lb) 143gr(0.315lb)
*Measured using Rosslare proximity card (AT-14) or equivalent. Range also
depends on electrical environment and proximity to metal.
2.1 Key Features
The key features for the AYC-Ex5 series are:
•Ultra-Slim Flush-mount design on flat surface
•Built-in piezoelectric keypad for PIN code entry
•Built-In 125 KHz ASK EM Proximity card reader (AYC-E65B)
•Programmable Patented Blue backlit keypad (AYC-E65B)
•Optical back tamper sensor and open collector tamper
output.
•Lockout feature on wrong entries (Keypad Tamper)
•Internal buzzer provides audible interface feedback
•Two status / programming Interface LEDs (tri-colored)
•Fully potted construction for outdoor use
•Comes with mounting template for easier installation
•Comes with an installation kit that includes a security screw
and a security screw tool

Technical Specifications
Reader
•Programmable keypad transmission format
•Programmable Card Transmission Formats: Clock & Data
and 26-Bit Wiegand (AYC-E65B)
•LED control input
•Programmable facility code
Controller
•Bi-directional secure communication with Rosslares’ secure
application appurtenance
•Three User Levels
oNormal User
oSecure User
oMaster User
•"Code Search" feature that helps make maintaining user
codes easier
•Three Modes of Operation
oNormal Mode
oBypass Mode
oSecure Mode
•Request-to-Exit (REX) signal from Rosslares’ secure
application appurtenance
•Chime Bell and Siren features are available with secure
application appurtenance
•Programmable Lock Strike Release, Siren, and Alarm Delay
timers
•Programmable Auxiliary input with versatile functions.
•Programmable Auxiliary output functions
•Programmable PIN code length.
AYC-Ex5 family manualPage 9

Installation
AYC-Ex5 family manual Page 10
3. Installation
3.1 Mounting the AYC-Ex5
Before starting, select the location to mount the AYC-Ex5. This
location should be at shoulder height.
For wall mounting, use the included mounting template as a
guide for drilling holes for mounting screws and wiring. For US
Gang Box mounting, no drilling is necessary.
Figure 1 Drilling & Mounting Template
When the unit is used a reader, route the interface cable from the
AYC-Ex5 to the Controller. When the unit is used as a secured
controller, route the interface cable from the AYC-Ex5 to
Rosslares’ secure application appurtenance. A linear type power
supply is recommended, when using the unit as a controller.
Screw the AYC-Ex5 to its mounting location or US gang box.

Wiring Instructions
4. Wiring Instructions
The unit is supplied with a 60-inch (1.5 meter) pigtail, having a 6-
conductor cable. To connect the unit to the controller, perform
the following:
Prepare the unit's cable by cutting the cable jacket back 1¼
inches and strip the wire ½ inch. Prepare the controller cable by
cutting the cable jacket back 1¼ inches and strip the wire ½ inch.
Splice the unit’s pigtail wires to the corresponding controller wires
and cover each connection.
Refer to the wire color table below, and to the wiring diagrams
provided on the following pages.
Reader Controller Color Functionality
5~16 VDC 5~16 VDC Red +DC Input
Shield / Ground Shield / Ground Black Ground
Data 1 / Clock C 1 White Communication
Data 0 / Data C 2 Green Communication
LEDCTL AUX. IN Brown LED Control / Auxiliary Input
Tamper Tamper Purple Tamper
If the tamper output is used, connect the purple wire to the
correct input on the controller when used as a reader, or to a
zone input of an intruder alarm system when used as a controller.
Trim and cover all unused conductors.
Note:
•The individual wires from the unit are color-coded according
the Wiegand standard.
•When using a separate Power Supply for the Reader, this
Power Supply and that of the Controller must have a common
ground.
•The Reader’s cable shield wire should preferably be attached
to an earth ground, or a signal ground connection at the
panel, or power supply end of the cable. This configuration is
best for shielding the Reader cable from external interference
AYC-Ex5 family manualPage 11

Wiring Instructions
Wiring diagram #1 (below) shows the wiring for the Controller
Application using a Dual Relay Secure Application Appurtenance.
Figure 2 Controller Application Wiring Diagram #1
AYC-Ex5 family manual Page 12

Wiring Instructions
Wiring diagram #2 (below) shows the auxiliary output connection
using the internal power.
Figure 3 Controller Application Wiring Diagram #2
Wiring diagram #3 (below) shows the auxiliary output connection
using external power.
Figure 4 Controller Application Wiring Diagram #3
AYC-Ex5 family manualPage 13

Wiring Instructions
AYC-Ex5
Figure 5: Reader Application Wiring Diagram #4
AYC-Ex5 family manual Page 14

Reader Functionality
5. Reader Functionality
The AYC-Ex5 series can function both as a reader and as a
controller. If the unit is connected to standard access controller, it
functions as a reader, indicated by one beep immediately after
power-on reset.
The following explains how the AYC-Ex5 series functions as a
reader.
5.1 Transmit Mode
When the AYC-Ex5 is in Transmit Mode, it is ready to receive data
from a presented Proximity Card or an entered PIN code.
When the reader is in Transmit
Mode, the Transmit LED is red and
the Program LED is off.
Mode/Transmit Door/Program
Red
When a Proximity Card or PIN entry is being transmitted, the
Transmit LED will flash green.
PIN data can be sent via one of eight different Keypad
Transmission Formats. For more information, see Selecting Keypad
Transmission Format on page 18.
Proximity Cards presented to the reader are always sent in either
26-Bit Wiegand, Clock & Data or, Wiegand Card + PIN format. See
Selecting Proximity Card Transmission Format on page 25 for more
information.
5.2 Programming the AYC-Ex5 Series
Programming the AYC-Ex5 series is done solely via the unit's
keypad driven Programming Menu System. To reach the
Programming Menu System the AYC-Ex5 must first be placed into
Programming Mode. During the AYC-Ex5's manufacturing process
certain codes and settings are pre-programmed. These settings
AYC-Ex5 family manualPage 15

Reader Functionality
AYC-Ex5 family manual Page 16
are called the "Default Factory Settings".
The table below shows the names of all the AYC-Ex5 Menus.
Programming Menu
Default Factory Settings are marked by a "*" sign.
Menu Description Default
1 Selecting Keypad Transmission Format
Single Key, 6-Bit Wiegand (Rosslare Format)
Single Key, 6-Bit Wiegand with Nibble + Parity Bits
Single Key, 8-Bit Wiegand, Nibbles Complemented
4 Keys Binary + Facility Code, 26-Bit Wiegand
1 to 5 Keys + Facility Code, 26-Bit Wiegand
6 Keys BCD and Parity Bits, 26-Bit Wiegand
Single Key, 3x4 Matrix Keypad
1 to 8 Keys BCD, Clock & Data
*
2 Selecting Card Transmission Format
26-Bit Wiegand
Clock & Data
Wiegand Card + PIN
*
3 Changing the Programming Code 1234
4 Changing the Facility Code 0
6 Backlight Options
Off
On (Default)
Off until key press when on for 10 seconds
Dimmed until key press when on for 10 seconds
*
0 Return to Factory Default Settings

Reader Functionality
Entering Programming Mode
1) Press the # key 4 times.
•Transmit LED will turn off. Mode/Transmit Door/Program
Red
•Program LED will turn red.
2) Enter your 4 digit Programming
Code. If the Programming Code is
valid, the door LED will turn
green and the AYC-Ex5 will
be in Programming Mode.
????
Mode/Transmit Door/Program
Green
Note:
•The factory 4-digit Programming Code is 1234.
•If a Programming Code is not entered within 30 seconds, the
AYC-Ex5 will return to Transmit Mode.
Exiting Programming Mode
1) To exit the Programming Mode at any time press #:
•You will hear a beep Mode/Transmit Door/Program
Red
•The Program LED will be
off
•The Transmit LED will turn red
2) This indicates that the AYC-Ex5 has returned to Transmit
Mode.
3) Wrong entries may reset the reader back to Transmit Mode.
While in Programming Mode if no key is pressed for 30
seconds the AYC-Ex5 will exit Programming Mode and return
to Transmit Mode.
AYC-Ex5 family manualPage 17

Reader Functionality
Selecting Keypad Transmission Format
The AYC-Ex5 has eight different keypad transmission formats to
select from. Follow the steps below to select the appropriate
keypad transmission format that you wish to use.
1) Enter Programming Mode.
AYC-Ex5 family manual Page 18
2) Press “1” to enter.
•The Transmit LED will turn
Red.
3) Enter the appropriate option no. for the
keypad transmission format that you
wish to select (see table below).
If an incorrect option no. is entered the reader will return to
Transmit Mode and the keypad transmission format will
remain unchanged
4) Look on the next page for more information on keypad
transmission formats.
5) System returns to Transmit Mode.
•You will hear three beeps.
•The Program LED will turn off
•The Transmit LED will turn red
Note:
•Only one keypad transmission format can be active at any
one time.
•When using the keypad transmission format "1 to 8 keys BCD,
Clock & Data" (Option 8) an additional input is required to
specify the number of keys in the PIN code.
1
?
Mode/Transmit Door/Program
Green
Mode/Transmit Door/Program
Red Green
Mode/Transmit Door/Program
Red

Reader Functionality
Keypad Transmission Format Option Number
See the table below to determine the Option Number for the
Keypad Transmission Format you wish to select
Keypad Transmission Format Option Number
Single Key, 6-Bit Wiegand (Rosslare Format) 1*
Single Key, 6-Bit Wiegand with Nibble + Parity Bits 2
Single Key, 8-Bit Wiegand, Nibbles Complemented 3
4 Keys Binary + Facility Code, 26-Bit Wiegand 4
1 to 5 Keys + Facility Code, 26-Bit Wiegand 5
6 Keys BCD and Parity Bits, 26-Bit Wiegand 6
Single Key, 3x4 Matrix Keypad 7
1 to 8 Keys BCD, Clock & Data Single Key 8
* Option 1 is the default factory setting.
More information on each of the different keypad transmission
formats is available below and on the following pages.
Option 1: Single Key, 6-Bit Wiegand (Rosslare Format)
Each key press immediately sends 4 bits with 2 parity bits added.
Even parity for the first 3 bits and odd parity for the last 3 bits.
0= 1 1010 0 ="A" in Hexadecimal 6= 1 0110 0
1= 0 0001 0 7= 1 0111 1
2= 0 0010 0 8= 1 1000 1
3= 0 0011 1 9= 1 1001 0
4= 1 0100 1

= 1 1011 1 ="B" in Hexadecimal
5= 1 0101 0 #= 0 1100 1 ="C" in Hexadecimal
AYC-Ex5 family manualPage 19