Rosslare AC-020 User manual

0
8
5
21
46
3
9
7
#
DOOR 1 DOOR 2
Hardware Installation and User’s Guide
AC-020
03/02

AC-020 Page 2 03/02

AC-020 Page 3 03/02
Hardware Installation
and User’s Guide for the AC-020
Access Control System
0
8
5
21
46
3
9
7
#
DOOR 1 DOOR 2

AC-020 Page 4 03/02
Copyright
Information in this document, including URL and
other Internet Web site references, is subject to
change without notice. Unless otherwise noted,
the example companies, organizations, products,
people and events depicted herein are fictitious
and no association with any real company,
organization, product, person or event is intended
or should be inferred.
© Copyright 2000 Rosslare. All rights
reserved.
Rosslare, the Rosslare logo, and the Rosslare
products referred to herein are either the
trademarks or registered to the trademarks of
Rosslare, All other trademarks are the property of
their respective owners.
Software License Agreement.
ROSSLARE IS WILLING TO LICENSE THE
ENCLOSED SOFTWARE ONLY ON THE
CONDITION THAT YOU ACCEPT ALL OF THE
TERMS CONTAINED IN THIS LICENCE
AGREEMENT. This is a legal agreement
between you (either the individual or the end-user
or an entity) and Rosslare. By opening this
software package, you are agreeing to be bound
by the terms and conditions of this Agreement. If
you do not agree to the terms of this Agreement,
promptly return the software package and other
items that are part of this product in their original

AC-020 Page 5 03/02
package with your payment receipt to your point
of purchase for a full refund. Grant of License.
Rosslare and its suppliers grant you a
nonexclusive license to use one copy of the
enclosed software program (”Software”) on one
computer with the Rosslare product you have
purchased. No other rights are granted. The
software is in use if it is loaded on the computer’s
permanent or temporary memory. For backup
purposes only you may make one copy of the
Software. You must include on the backup copy
all copyright and other notices included on the
Software as supplied by Rosslare. Installation on
a Network server for the sole purpose of your
internal distribution of the Software is permitted
only if you have purchased an individual software
package for each networked computer to which
the software is distributed. Restrictions. Rosslare
and its suppliers retain ownership of the
Software. You may not decompile, disassemble,
reverse engineer, or modify the Software in any
way. You may not transmit the software over a
network (except as expressly permitted above),
by telephone, or electrically using any means.
You may not transfer the Software except upon a
permanent transfer of the enclosed Rosslare
product provided that all software updates are
included in the transfer, you do not retain a copy
of the Software, and the transferee agrees to be
bound by the terms and conditions of this license.
Upon any violation of any of the provisions of this

AC-020 Page 6 03/02
Agreement, rights to use the Software shall
automatically terminate and the Software must be
returned to Rosslare or all copies of the Software
destroyed. Limited Product Warranty. Rosslare
warrants that any hardware products
accompanying this documentation shall be free
from significant defects in material and
workmanship for a period of one year from the
date of purchase. Rosslare also warrants that the
Software accompanying this documentation will
perform substantially in accordance with the
documentation for a period of 90 days from
purchase. Rosslare’s hardware and software
warranty is nontransferable and is limited to the
original purchaser. Product Remedies. Rosslare’s
entire liability and the licensees exclusive remedy
for any breech of warranty, shall be, at Rosslare’s
sole option, either a) return the price paid or b)
repair or replacement of hardware or software,
provided that the hardware is returned to the
point of purchase, with a copy of the sales
receipt. Any replacement hardware and software
will be warranted for the remainder of the original
warrantee period or 30 days for the hardware and
30 days for the software, whichever is longer.
The remedies are void if failure of the software or
hardware has resulted from abuse, accident or
misapplication.
Limitation of Liability.
THE WARRANTIES SET FORTH IN THIS
AGREEMENT REPLACE ALL OTHER

AC-020 Page 7 03/02
WARRANTIES. ROSSLARE EXPRESSLY
DISCLAIMS ALL OTHER WARRANTIES,
INCLUDING BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE AND NON-
INFRINGEMENT OF THIRD PARTY RIGHTS
WITH RESPECT TO THE DOCUMENTATION,
SOFTWARE, AND HARDWARE. NO
ROSSLARE DEALER, AGENT, OR EMPLOYEE
IS AUTHORISED TO MAKE ANY
MODIFICATION, EXTENSION, OR ADDITION
TO THIS WARRANTY. IN NO EVENT WILL
ROSSLARE OR IT”S SUPPLIERS BE LIABLE
FOR ANY COSTS OF PROCUREMENT OF
SUBSTITUTE PRODUCTS OR SERVICES,
LOST PROFITS, LOSS OF INFORMATION OR
DATA, OR ANY OTHER SPECIAL DIRECT OR
INDIRECT, CONSEQUENTIAL, OR
INCIDENTAL DAMAGES ARISING IN ANYWAY
OUT OF THE SALE, OF, USE OF, OR
INABILITY TO USE ANY ROSSLARE PRODUCT
OR SERVICE, EVEN IF ROSSLARE HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. IN NO CASE SHALL ROSSLARE’S
LIABILITY EXCEED THE ACTUAL MONEY PAID
FOR THE PRODUCTS AT ISSUE. Because
some jurisdictions do not allow the
implementation of limited warranties or liability for
incidental, consequential, special, or indirect
damages, the above limitation may not always

AC-020 Page 8 03/02
apply. The above limitations will not apply in case
of personal injury where and to the extent that
applicable law requires such liability.
U.S. Government Restricted Rights.
The software is provided to the U.S. Government
only with restricted rights and limited rights of
use, duplication or disclosure by the U.S.
Government is subject to restrictions set forth in
48 C.F.R 2.101 (Oct 1995) consisting of
“Commercial Computer Software” and
“Commercial Computer Software Documentation”
as such terms are used in 48 C.F.R. 12.212
(September 1995), and in FAR Sections 52-227-
14 and 52-227-19 or DFARS Section 52.227-
7013 (C) (ii), or their successors, as applicable.
Consistent with 48. C.F.R. 12.212 and 48 C.F.R.
227.7202-1 through 227.7204-1 (June 1995), or
any successor regulations, this software is
provided to the terms and conditions herein.
Contractor/ Manufacturer Rosslare Enterprises
Ltd. 12 Wang Tai Road, Hong Kong.

AC-020 Page 9 03/02
Contents
Introduction .....................................................11
Key Features .................................................13
Technical Specifications ................................14
Installation .......................................................16
Mounting the Controller .................................16
Power Wiring .................................................19
Typical Lock and Option Wiring .....................19
Reader Wiring................................................20
Features and Concepts...................................21
Modes of Operation .......................................21
Changing the Modes of Operation.................25
Events and Event Actions..............................28
AC-020 Programming Instructions ................31
Programming Menu Quick Reference Guide .31
Replacing a Lost Programming Code ...........58
Replacing a Lost Normal / Secure Code .......59
Accessories .....................................................60
Technical Support...........................................67

AC-020 Page 10 03/02

AC-020 Page 11 03/02
Introduction
The AC-020 is an advanced two door controller,
which allows you to add or delete employees
from the system, change system mode status
and change system authorization codes.
The AC-020 provides a higher level of security as
the programmer is normally placed in a secure
location while the reader sensors are remotely
located outside the controlled premises. Should a
remote sensor be attacked, entry cannot be
gained as the remote sensor only provides data
to the programmer, not authorization to release
the controlled door.
The AC-020 accepts up to 500 employees for
each door via the use of proximity cards
(provided separately) or PIN. Each employee is
issued a unique proximity card or PIN code.
Employees designated 01 to 10 are Master users
and can operate the system in both the Normal
and Secure modes of operation. Employees 11 to
500, when entered from the external reader
sensor may only operate the Controller in the
Normal and Bypass modes of operation.
It is very important to keep an accurate record of
the slot number and its assignment to each
employee. This is to enable you to add additional
employees at a later time or to delete a Prox. or
PIN code if one is lost or stolen. A record form is

AC-020 Page 12 03/02
enclosed for your reference to assist you with
your record keeping.
The AC-020 is capable of learning both PIN
codes (keyboard based codes - 4 digits code)
and Prox. Codes (codes received from proximity
card reader). The Controller has two reader
inputs, one for Door 1 and one for Door 2. These
readers are to be located outside the restricted
area. Readers need to be Wiegand 26 bits
interface type, and may be a Proximity card
reader (for Prox. Codes), Keyboard (for PIN type
codes) or combined PIN/PROX reader. Please
refer to Accessories – page 60.
The PIN reader can be used for programming the
system, in addition to its regular duty of codes
entry. During normal use, PIN codes that are
employee codes can be entered only from reader
sensor, while Special Codes may be entered
either from AC-020 or from the reader.
Topics in this section:
• Key Features
• Technical Specifications

AC-020 Page 13 03/02
Key Features
Here are some of the AC-020 system key
features:
• Supports two 26-Bit Wiegand compatible
Readers
• Three Modes of Operation
 Normal Mode
 Bypass Mode
 Secure Mode
• Lock Strike Relay Output
• Request to Exit (REX) button
• Internal Siren
• Comes with security screw and security tool
• Two Status / Programming Interface LED’s
• Built-in Programming Keypad
• Battery Charger
• Bell, Chime, & Strobe annunciator
• Programmable Lock Strike release time.
• Built-in Lock Strike suppressor diode.
• Comes with mounting template for easier
installation.
• Built-in Reader Power Supply
• Built-in Lock Strike Power Supply

AC-020 Page 14 03/02
Technical Specifications
Electrical Characteristics
Main Unit
Operating Voltage: 16V AC (1.5A, 25VA)
From a transformer
Maximum Input
Current:
(Not including attached
devices)
Standby: 65mA
Maximum: 120mA
Battery Charger: 12V DC Lead Acid
Battery
Up to 7AH
recommended
Outputs
Lock Strike Relay
Output:
5A Relay
Lock Strike Power
Supply:
12V DC constant
voltage
1.2 A current limit
Reader Power
Supply:
Voltage: 12V DC
Max Current: 300mA

AC-020 Page 15 03/02
Inputs
Request to Exit
(REX):
N.O. Dry Contact
Reader Input: 26-Bit Wiegand
Compatible
Indicators & Annunciators
Visual: Two Tri-Colored LEDs
Audio: Built in Sounder (Bell,
Chime & Siren)
Piezoelectric Buzzer
Environmental Characteristics
Operating
Temperature:
-25°F to 145°F (-31°C
to 63°C)
Operating Humidity: 0 to 95% (Non-
Condensing)
Mechanical Characteristics
Dimensions: 5.3” (134mm) L x 3.4”
(85mm)
W x 1.2” (30mm) D
(Fits US Gang Box)
Weight: 0.5 lbs (220g)

AC-020 Page 16 03/02
Installation
The AC-020 has been designed for easy
installation. Only a few steps are required to
install the controller.
In this section you will learn how to mount the
controller in your desired location.
You will learn how to wire the controller to its
power source, which includes attaching the
controller to a rechargeable Lead Acid battery.
Wiring diagrams are also provided for attaching
the controller to the REX button and External 26-
Bit Wiegand Compatible readers.
Topics in this section:
• Mounting the Controller
• Power Wiring
• Typical Lock and Option Wiring
• Reader Wiring

AC-020 Page 17 03/02
Mounting the Controller
1) Before starting, select the location for
mounting the AC-020 controller. The
controller should be installed indoors and
within the premises to be secured. It is
recommended that the controller be installed
where it cannot be seen for increased
security, but still close enough to the doors
so that the controller’s annunciator (Door
Bell, Chime & Siren) can be heard.
2) Find the mounting template label that is
provided in your AC-020 packaging, and
place it at the location that you wish to install
the controller. The template is designed to
assist you through the mounting procedure,
showing you where you drill holes in the wall
to pass the wiring through and where the
wall must be drilled to insert the controllers
mounting screws.
3) (Skip this step when attaching the AC-020 to
a US Gang Box)
Drill a hole for cables as indicated on the
wiring template. Two hole sizes are shown to
allow for the amount of cables needed,
depending on installation requirements or
adding a backup battery. Drill two screw
holes for mounting the AC-020 to the wall.

4) Remove the case screw from the controller
(see diagram below to locate the case
screw) and remove the front case from the
controller.
5) Mount the controller to the wall using the two
screws provided in the Installation Kit or use
the screws provided with your US Gang Box
when mounting to a US Gang Box.
6) Wire the controller according to the diagrams
on the next few pages.
7) Return and secure the front case using the
security screw and security tool provided in
the Installation Kit.
You now have mechanically installed the
controller.
AC-020 Page 18 03/02
0
8
5
21
46
3
97
#
DOOR 1 DOOR 2
Case Screw
3 x 4 Matrix Keypad
Door 2 LED
Door 1 LED

Power Wiring
0
8
5
21
46
3
97
#
DOOR 1 DOOR 2
POWER SUPPLY
FROM
TRANSFORMER
16V AC (1.5A, 25VA)
(+)
(-)
12V DC LEAD ACID
BATTERY
UP TO 7 AH
RECOMMENDED
(+)
(-)
Typical Lock and Option Wiring
AC-020 Page 19 03/02
0
8
5
21
46
3
97
#
DOOR 1 DOOR 2
REX 2
(-)
N.O.
REX 1
N.O.
(-)
DOOR 1
DOOR 2

Reader Wiring
0
8
5
21
46
3
9
7
#
DOOR 1 DOOR 2
READER
READER
+12V
(-)
DO
D1
+12V
(-)
DO
D1
(-)
DO
D1
12V DC, Max. 300mA
12V DC, Max. 300mA
DOOR 1
DOOR 2
(-)
+12V
DO
D1
+12V
AC-020 Page 20 03/02