Royal Sovereign ARP-1400BLS User manual

Royal Centurian Inc.
portable air conditioner
Read and retain these instructions for future reference
arp- 1400blS, 1400WW
oWner’S Manual
arp-1400blS, 1400WW
portable air conditioner

Page
Precautions for use 4
Notes on operation and identification of parts 5
Installation instructions 6~7
Operation 8~9
Remote control  10~11
Maintenance 12
Troubleshooting 13
Specifications 14
contentS

arp-1400blS, 1400WW
5
noteS on operation
If you turn the air conditioner off and immediately restart it, allow 3 minutes for the compressor to restart cooling. In the event of a power failure, wait 3 minutes before restarting
unit.
identiFication oF partS
1. Air outlet
2. Display panel
3.∙Air∙intake∙(evaporator)
4. Air inlet hose
5. Air filter
6.∙Air∙outlet∙hose(heat∙exchange)
7. Water outlet drain
8. Caster
9. Power supply cord
➀
➁
➂
➃➅
➄
➇
➈
➆

arp-1400blS, 1400WW
7
C. Install the Window Slider Kit : Fig 3.
1. Open the window and place the window slider kit on the inside edge of the window.
2. Adjust the window slider by adjusting it to the width of the window.
3. Close the window to secure.
4. Tighten the four screws to lock the window slider in place.
D. Connecting the Exhaust Hose to the PAC : Fig 4.
1. Connect the hose connector to the air outlet by aligning the tabs on the hose to the PAC and snap it into place.
2. Repeat for other hose.
E. Connect the Exhaust Hose to Window Slider Kit : Fig 5.
1. Move the Portable Air Conditioner within 4 feet of the window.
2.∙∙Extend∙hose∙to∙desired∙length∙by∙pulling∙open.
3.∙∙Align∙the∙tabs∙on∙the∙hose∙and∙the∙window∙panel∙fixture∙and∙snap∙them∙into∙place.
• Do not use this unit with any extension cords or adapter plugs.
Fig 3.
Fig 4.
Fig 5.

ARP-1400BLS, 1400WW
9
Cool Mode
When in Cool mode the indicator light will shine green.
1. During operating, the unit displays “present room temperature.”
2. When setting the temperature, the unit will display the temperature set. Temperature range is 61°F to 89°F
3. In Cool mode, use the “+” or “-“button to adjust and set the desired temperature for the room. After 5 seconds the display will revert back to the current room temperature.
Temperature can only be adjusted in Cool mode. The time is adjustable between 1~24 hours.
Fan Speed Control
The Fan speed has 3 settings: High, Medium, and Low
Changing Temperature Reading from Celsius to Fahrenheit
Press the Timer and Temperature set buttons at the same time to display the temperature reading you would like to use.
Timer
There are 2 different timer programs. You can set the number of hours before the air conditioner automatically turns OFF or you can set the number of hours that will elapse
before the unit turns ON.
When the air conditioner is turned off, you can choose to turn it on in one hour intervals.
1. Press the button on the remote to turn on the timer function
2. Press the + or - button on the remote to set the desired hour.
3. The unit will turn on when the set time elapses.
When the air conditioner is turned on, you can choose to turn it off in one hour intervals.
1. Press the button on the remote to turn on the timer function
2. Press the + or - button on the remote to set the desired hour.
3. The unit will turn off when the set time elapses.
Automatic Restart:
In the event of a power failure: The settings will return to the previously set operating modes once the power is restored.
Power Plug Check
1. Press the RESET button.
2. Insert the power plug into the electrical outlet.
3. Press the TEST button. If the circuit breaker is working you’ll hear a click.
4. Press the RESET button until you hear another click. The circuit breaker in the plug is now activated.
5. Do not use the air conditioner if the above procedure cannot be successfully performed.
After switching the air conditioner off, wait 3 minutes before switching it back on again.

ARP-1400BLS, 1400WW
11
Remote Control Operation
-∙The∙remote∙control∙uses∙two∙∙AAA∙(IEC∙RO#∙1.5V)∙batteries∙which∙have∙been∙included∙for∙your∙convenience.
- Remove the battery cover on back of the remote.
-∙Insert∙the∙batteries,∙making∙sure∙the∙(+)∙and∙(-)∙polarity∙is∙aligned∙correctly.
- Replace the battery cover.
Notes:
-When replacing batteries, always change both batteries at the same time.
-Remove the batteries if the remote control is not used for a month or longer.
-Do not dispose of batteries in a fire.
Battery replacement
Remove∙the∙cover∙on∙the∙back∙of∙the∙remote∙control∙and∙insert∙the∙batteries∙with∙(+)∙and∙(-)∙poles∙pointing∙in∙the∙proper∙direction.
Battery compartmentBattery compartment lid

ARP-1400BLS, 1400WW
13
TRouBlESHooTINg
Problem Possible Reasons
Air Conditioner does not operate
- Check and reset the power plug. Wait 3 minutes and try to run the unit again.
- The batteries in the remote may need to be replaced. Replace the batteries and try to run the unit again.
- Make sure the plug is properly plugged into the outlet.
- The set temperature may be too close to room temperature. Lower the set temperature.
- The air outlet may be blocked. Check the air outlet and remove any items that may be found.
Air Conditioner runs but does not cool
- Check the room for open doors or windows and close them.
- There may be another appliance in the room giving off heat. Check the room and turn off the appliance.
- The air filter may be dirty. Check the filter and clean if necessary.
-∙The∙air∙exhaust∙or∙intake∙may∙be∙blocked.
- The set temperature may be too high. Check the set temperature and reduce it if necessary.
Air Conditioner does not run
and water full indicator is lit -∙There∙may∙be∙excess∙water∙in∙the∙unit.∙Drain∙the∙unit.