Royal sovereign Rbc-ed200 User manual

BILL COUNTER WITH

COUNTERFEIT DETECTION

Owner's Manual

Royal Sovereign International, Inc. Please read and retain these instructions.

To register your product, please go to www.royalsovereign.com

RBC-ED200

CONTENTS

Thank you for purchasing the Royal Sovereign Bill Counter with

Counterfeit Detection -RBC-ED200. This manual will provide you with

safety information, instructions for optimal use, and proper care and

maintenance for your product. Please read this manual carefully

before operating.

SAFETY INSTRUCTIONS

When using this machine follow these safety precautions to reduce risk of fire, electric shock, or injury.

WARNING

Read & Fully Understand This Owner’s Manual Before Using This Machine.

1. Only use the power cord that comes with the machine. Plug the power cord into a properly

grounded wall outlet.

2. Do not use the machine if the power cord is damaged.

3. Do not place the machine in an area where it may be exposed to water or other liquids.

4. Do not take apart the machine. When service or repairs are needed, bring to a qualified service

repair technician or contact Royal Sovereign Customer Service.

5. When unplugging the power cord from the outlet, grip the plug to pull it out.

6. Do not place objects on the power cord and do not bend it excessively.

7. Before dusting the machine with a brush, unplug the machine from the wall. Do not use liquid

or aerosol cleaners on the machine. Use a soft brush to avoid any paper particles or dust from

sticking to the light transmitter or the light receiving sensors.

8. Do not use the machine in areas of high temperature, high humidity, or strong sunlight. This

may result in the machine not working properly.

9. When not using the machine for long periods of time, unplug the power cord from the outlet.

10. The effective power must be in scope of 110V.

Control

Panel

Carrying

Handle

Bill Counter Power Cord

PRODUCT VIEW

BOX CONTENTS

Bill Receiving

Vanes

Hopper

QUICK START GUIDE

1. Plug the power cable into the back of the unit and into the wall power outlet (A).

2. On the back of the machine, flip the power switch to power on (B).

3. The machine will go through an automatic self-diagnostics test to ensure accurate

bill counting. The counting wheels in the bill counter will spin several times to ensure

it is ready for use. When the machine has completed its test run and “0” displays on

the machine, it is now ready for counting.

4. Place your currency into the hopper to automatically begin counting.

For More Detailed Instructions, Go To Page 6

A: Power Socket

B: Power Switch

C: Thickness Adjuster

CONTROL PANEL

Counterfeit

Indicators

Auto/Manual

Button

Speed

Button

ADD

Button

Clear

Button

Batch

Buttons

Start

Button

Speed

Indicators Counterfeit

Button

1. Attach the power cable to the back of the machine, plug into a three-prong outlet, and turn the switch on.

•The unit will conduct an automatic self-diagnostics to ensure accurate counts.

•After five seconds of the counting wheels spinning, the screen will display “0”.

•If there is a problem, the preset display will show an error code. (See ERROR CODE DISPLAY

AND SOLUTIONS –LOCATED ON PAGE 8.)

2. Before counting, select counting settings that are related to your counting needs:

•Add Mode: The ADD mode displays the cumulative total of all bills counted. To turn the ADD

mode on, press the “ADD” button.

•Counterfeit Detection: To turn on the counterfeit detection methods (UV,MG,IR, and DD), press

the “CF” button. To turn off the counterfeit detection methods, select the “CF” button until the

indicator lights turn off.

oUV Counterfeit Detection: Counterfeit bills often used white or bleached paper, which

will glow under ultraviolet light. When the UV detector finds a suspicious bill, the

machine will stop counting to allow removal and will display the error code on the

display. To resume counting, simply press “START”.

oMG Counterfeit Detection: If the magnetic detector does not find the presence of

magnetic ink that are standard in authentic bills, the machine will stop counting to

allow removal and will display the error code on the display. To resume counting,

simply press “START”.

oIR and DD Counterfeit Detection: The dimension detector measures the width of the

center of each bill by using infrared light. If the detector finds an odd sized bill, the

machine will stop counting to allow removal of the bill and display the error code on

the preset display. To resume counting, simply press “START”.

PRODUCT OPERATION

PRODUCT OPERATION (CONTINUED)

MAINTENANCE OF THE MACHINE

WARNING: Before dusting or cleaning, turn the power switch off and disconnect the power cord from the

machine. It is very important to clean all the sensors in the machine with a soft brush to avoid any paper

particles or dust from sticking to the light transmitter or the light-receiver sensors. It is important to clean

the inside of the machine occasionally. Unplug the machine and lift the top cover to gain access to the

interior.

If necessary, the glass surfaces of the detectors may be wiped with a soft cloth damped with alcohol.

To get the best results out of your bill counter, Royal Sovereign recommends using Royal Sovereign

Cleaning Cards (RBC-CLN) to remove dirt, dust, oils, and other contaminates from bill counters. With the

machine on, simply run the cleaning card through the machine like a bill. This cleaning card will run through

and clean the sensors of dirt and other contaminates. Cleaning cards are recommended to be used after

every 100 cycles.

•Auto and Manual Start Modes: Select the “MNL” button to flip between Auto and Manual

start. In Manual mode, insert the bills into the hopper, and select “START” to begin counting.

•Batch Mode: The machine is preset to common counting mode, which automatically counts

all bills placed into the hopper. To count bills in batches, press the “BATCH” button. The

batch count amount will automatically start at 100.

•Press the “BATCH” button again to set the amount to 50.

•Press the “BATCH” button again to set the amount to 20.

•Press the “BATCH” button again to set the amount to 10.

•Press the “BATCH” button again to set the amount to 1.

•Press the “BATCH” button again to turn the batch mode off.

•Use the “+” and “-” buttons to increase and decrease the quantity by 1.

3. Place bills into the hopper to begin counting.

TROUBLESHOOTING

Error Code Reason Solutions

Bills get damaged /

Machine runs slow /

Bills not feeding properly

Hopper Tension is too

tight

To loosen the tension, please turn the bill

thickness adjuster (located on the back of

the machine) to the right. Repeat bill

counting and adjust if the problem

continues.

Bills eject from the

machine / Display shows

miscount / Display

shows “DOUBLE” or

“CHAIN”

Hopper Tension is too

loose

To tighten the tension, please turn the bill

thickness adjuster (located on the back of

the machine) to the left. Repeat bill

counting and adjust if the problem

continues.

Error Code Reason Solutions

E4 UV Sensor Clean the sensor or contact Royal Sovereign to

replace sensor if error code persists.

E1 Left Counting Sensor Clean the sensor or contact Royal Sovereign to

replace sensor if error code persists.

E2 Right Counting Sensor Clean the sensor or contact Royal Sovereign to

replace sensor if error code persists.

E6 Note-Receiving Sensor Clean the sensor or contact Royal Sovereign to

replace sensor if error code persists.

ERROR CODE DISPLAY AND SOLUTIONS

The display may show some error codes when counting, which means there are some problems with

the machine. Refer to the chart below to solve the errors.

ERROR CODE DISPLAY AND SOLUTIONS (CONTINUED)

If you are receiving error codes above, check the machine for dust. If you continue to receive error codes,

please contact Royal Sovereign’s Service Center at 1-800-397-1025.

Error Code Reason Solutions

E5 Note-Feeding Sensor

Clean the sensor or contact Royal

Sovereign to replace sensor if error

code persists.

EH Half Sheet Error Remove last note from stacker.