RRS CA-1 User manual

IN USEFEATURES
CA-1 CABLE ANCHOR
SPECIFICATIONS:
Weight.....................................................................1.4 ounces (40g)
Material.................................... machined from 6061-T6 aluminum
CA-1 Cable Anchor mounts firmly
to side of L-plate. Secures multiple
cables to prevent accidental release.
Use pinch bar knob to
secure and release cables.
Dovetail edges secure
to any Really Right Stu
style rail or plate.
Pinch point cutouts
accommodate both
thin & thick cables.
Use clamp knob
to secure and
release CA-1 from
rails and L-plates.
1146 Farmhouse Lane, San Luis Obispo, CA 93401 USA
1-805-528-6321 | 1-888-777-5557
www.ReallyRightStu.com

® , ™, © 2017 Really Right Stuff, LLC. All rights reserved.
GUARANTEE
All Really Right Stu brand products are guaranteed to
the original purchaser to be free of defects in materials
or workmanship for five (5) years from the date of
purchase. Products will be repaired or replaced at our
option.
MAINTENANCE
Periodically wipe unit clean with a dry cloth to remove any
contamination. Apply general purpose grease to thread tips to
prevent squeaking. Note that wingnut knobs are not captive; if you
fully unscrew knobs they can be removed. During normal operation
it is only necessary to partially unscrew knobs.
SECURE CABLE ANCHOR TO L-PLATE
Release clamp knob then slide onto rail or L-plate. Place in desired
position, then turn clamp knob clockwise to secure in place.
SECURE CABLE IN CABLE ANCHOR
Unscrew pinch bar knob, then raise pinch bar and slide cable
into place. The pinch point cutouts
accommodate cables of varying
thickness. Once cable is in
place, turn pinch bar
knob just until
cable is firmly
secured. Do not
overtighten pinch
bar knob.