RUGGED RANCH 44955 User manual

Important Notes:
Lay out all components prior ro start of assembly.
Flat level surface recommended for assembly.
If any components are missing or damaged do not
return to retailer. Please call Rugged Ranch
Products at: 760-734-3748.
Please visit our website to see our complete line of
Rugged Ranch Products.
www.ruggedranch.net

Place Bottom Panel (A) on table with back edge
closest to you. Attach both End Panels (D) on
Bottom Panel.
Attach Back Panel (C) to End Panels (D). Attach Bottom Lip (F) to End Panels (D) .
Attach Top Lip (E) on to End Panels (D). With at sides facing in and notched
bottom side down, insert Center Panels
(B) into middle tracks. Line screw holes
up with wooden frames and screw in
remaining 4 back panel screws (H) and
front 4 remaining lip screws (H).
Place Roof Panel (G) on top of assembled
hutch with wooden border facing front.
Latch Back Latches into roof to ensure align-
ment. With latches in place, screw in remain-
ing 4 roof screws.
**Please note: Back edge on panel A is the
edge with spacing from all four guide rows.
**Back Panel must be on back edge of Panel
(A) and sit ush.