Rutland County Garden Furniture Reading steps User manual

Assembly Instructions
Reading steps
1
Before you commence the assembly process we recommend that you read these instructions
thoroughly beforehand to familiarise yourself with the assembly process and to also check that you have
the correct components. If for any reason you need assistance, you can find our contact details on the
final page of these instructions.
We highly recommend that any assembly is carried out on a flat, level surface if possible and that you
use another person to assist you if necessary.
Package contents
Tools required
1 x Back panel
2 x Side panels
3 x Tread panels
6 x Riser panels
54 x 65mm screws
Electric screwdriver with No2 Pozidrive bit
Or No2 Pozidrive Screwdriver
The Reading steps

Reading steps
Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,
Aslackby, Sleaford, Lincs, NG34 0HZ.
Company No: 7670072 VAT No: 151744027
2
Step 1
Step 2
Ensure that you have all of the correct parts as listed
on the front page of these instructions, including any
fixings.
Using an assistant, arrange the back panel and a side
panel as shown.
Step 3
Step 4
Affix the back panel to the side panel using a 65mm
screw at the top...
...at the middle, down through the tread support into
the batten across the back panel...

Reading steps
Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,
Aslackby, Sleaford, Lincs, NG34 0HZ.
Company No: 7670072 VAT No: 151744027
3
Step 5
Step 6
...and at the bottom, through the back panel batten
into the side panel base rail.
Put the second side panel into place and repeat steps
3 to 5.
Step 7
Step 8
Starting from the top step, place a riser panel across
the assembly, making sure that there is no gap
between the side panel and the end of the riser
panel, secure in place with 2 x 65mm screws at each
end of the riser panel.
Add another riser panel above the first one and
secure in the same way. Proceed as above on the
next step down...

Reading steps
Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,
Aslackby, Sleaford, Lincs, NG34 0HZ.
Company No: 7670072 VAT No: 151744027
4
Step 9
Step 10
...and then the bottom step.
Working from the bottom this time, slot a tread panel
into the top of the step assembly as shown above and
secure in place using 4 x 65mm screws down through
each side of the tread panel.
Step 11
Step 12
Work your way up the remaining steps, fixing each
one in place with 8 x 65mm screws as before.
Your reading steps are now complete.
We hope that you found your product quick and easy to assemble but if not and you require any
further assistance or have any questions you can contact us by telephone on: 01778 440803
Email: [email protected]
www.rutlandcountygardenfurniture.co.uk