Rutland county garden furniture The langham major store User manual

Assembly Instructions

The Langham Major Store

Before you commence assembly, we recommend that you read these instructions thoroughly beforehand to familiarise

yourself with the procedure and to also check that you have the correct components. If for any reason you need assistance,

you can find our contact details on the final page of these instructions.

We highly recommend that any assembly is carried out on an open flat, level surface with sufficient space.

Tools required:

No2 Pozidriv screwdriver (or electric driver).

Components

16 x 65mm,

10 x75mm screws

2 x Spacer block

1 x Roof

1 x Left panel

1 x Right panel

1 x Back panel

1 x Finishing strip

1 x lattice

1 x Centre post

1 x Back rail

1 x Front rail

Latch keep & 20

black screws

Door version only

2 x Door

Door version only

The Langham Major Store

Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,

Aslackby, Sleaford, Lincs, NG34 0HZ.

Company No: 11025348 VAT No: 282569762

Step 1

Step 2

Begin by arranging the left panel and the back panel at

90° to each other, with the back panel raised up on the

spacer blocks by approximately 25mm. Use 2 x 65mm

screws to secure as shown.

Now add the right hand panel, fixing in the same way with

2 x 65mm screws.

Step 3

Step 4

Now slide the front rail, vertical pencil marks outmost and

the batten closest to the floor, into the slots toward the

bottom of the front posts…

…and secure each side in place with 2 x 75mm screws per

side.

The Langham Major Store

Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,

Aslackby, Sleaford, Lincs, NG34 0HZ.

Company No: 11025348 VAT No: 282569762

Step 5

Step 6

Now insert the back rail in the same manner, batten

innermost, and secure each side in place with 2 x 75mm

screws.

Place the centre post vertically as shown against the front

rail, aligned between the pencil marks on the face of the

rail.

Step 7

Step 8

Fix the centre post in place with 2 x 75mm screws driven

through the front rail into the post.

Drop the lattice into place so that it is sitting on the

battens of the rails.

The Langham Major Store

Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,

Aslackby, Sleaford, Lincs, NG34 0HZ.

Company No: 11025348 VAT No: 282569762

Step 9

Step 10

Lower the roof into place making sure that it is not back

to front (check the roof battens finish flush with the outer

posts).

Now fix both sides of the roof into place with 2 x 65mm

screws into the front post and 1 x 65mm screw into the

rear post.

Step 11

Step 12

Place the finishing strip flat against the front posts so that

it is centred across them. Now slide it up until it just

touches the underside of the roof.

Fix the finishing strip in place with a pair of 65mm screws

into each post. Please proceed to Step 13 if your store

has a door –if not, well done! Your store is now

complete!

The Langham Major Store

Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,

Aslackby, Sleaford, Lincs, NG34 0HZ.

Company No: 11025348 VAT No: 282569762

Step 13

Step 14

Align each door (also check it is the right way up) so that

the top edge clears the underside of the finishing strip by

approx 10mm and each hinge leaf sits flat against the post

with the knuckles resting against the front edge of the

post. Secure the hinges in place using 8 x black screws.

Position each cabin latch keep in turn on the post and

aligned horizontally with the latch as shown. Secure in

place with 2 x black screws.

Step 15

Your Langham Major Store is now complete.

We hope that you found your product quick and easy to assemble but if not and you require any further assistance or have

any questions you can contact us by telephone on: 01778 440803

Email: info@rutlandcountygardenfurniture.co.uk www.rutlandcountygardenfurniture.co.uk

Table of contents

Other Rutland County Garden Furniture Outdoor Furnishing manuals