Rutland County Garden Furniture Screen Pergola User manual

Assembly Instructions
Rutland Screen Pergola
1
Before you commence the assembly process we recommend that you read these instructions
thoroughly beforehand to familiarise yourself with the assembly process and to also check that you have
the correct components. If for any reason you need assistance, you can find our contact details on the
final page of these instructions.
We highly recommend that any assembly is carried out on an open flat, level surface if possible with
sufficient space. You will also require the assistance of another adult to complete assembly safely.
Please note: This pergola will requiring anchoring into the ground to complete construction. We recommend holes in the ground filled with
postfix or concrete as the best method.
Package contents
Tools required
2 x Posts (3 for 4.2 & 4.8M version)
2 x Diagonal braces (4 for 4.2 & 4.8M version)
1 x Runners
4 x M8 Coach screws (8 for 4.2 & 4.8M version)
4 x 75mm screws (6 for 4.2 & 4.8M version)
10mm socket drive
Electric screwdriver with No2 Pozidrive bit
Or No2 Pozidrive Screwdriver
The Rutland Screen Pergola

Rutland Screen Pergola
Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,
Aslackby, Sleaford, Lincs, NG34 0HZ.
Company No: 7670072 VAT No: 151744027
2
Step 1
Step 2
Take one of the posts and one of the runners and
arrange on the floor as shown...
...so that the notch in the post can accommodate the
runner...
Step 3
Step 4
...and the post is perpendicular to the runner and its
outside edge is aligned with the pencil mark near the
runner's end.
Slide the post onto the runner and fix into place using
2 of the 75mm screws through the pre-drilled holes.
Then align one the braces as shown, aligning it so that
its ends are flat and also central against the runner
and post.

Rutland Screen Pergola
Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,
Aslackby, Sleaford, Lincs, NG34 0HZ.
Company No: 7670072 VAT No: 151744027
3
Step 5
Step 6
Now fix it into place using a coachscrew through
the...
...pre-drilled hole at each end of the brace.
Step 7
Step 8
For a 3 post (4.2 and 4.8M) version line up the
intermediate post with the mid-point pencil lines on
the runner, slot into place, ensuring it is at 90° to the
runner and fix in place with 2 x 75mm screws.
Attach a brace either side of the post as before.

Rutland Screen Pergola
Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,
Aslackby, Sleaford, Lincs, NG34 0HZ.
Company No: 7670072 VAT No: 151744027
4
Step 9
Step 10
Carefully lift the completed structure into the upright
position as shown and position in its final location
before securing into place.
Your Rutland Screen Pergola is now complete.
We hope that you found your product quick and easy to assemble but if not and you require any
further assistance or have any questions you can contact us by telephone on: 01778 440803
Email: [email protected]
www.rutlandcountygardenfurniture.co.uk