Rutland County Garden Furniture PREMIER User manual

COMPONENTS
1 x Table Top
2 x Seats
2 x Table Leg frames 2 x Seats
4 x Seat Leg frames
1 x Parasol Support 2 x A frames
4 x Angle Braces
2 x Leg Braces
M8 Coach Screws
(70mm)
Cover Caps
INSTRUCTIONS FOR PREMIER PICNIC BENCH

Lay the table top down and position the legs, as shown in pictures 2 and 3. Ensure the leg frame has an even gap at both ends.
Using the 70mm coach screws, fix the legs into position, as shown above.

Stand the Bench upright; now place the Leg Brace in position, using the pencil line shown in pictures 3 and 4 as a guide. Using the
70mm coach screws, fix securely in place and repeat with the other leg Brace.

Slide the parasol support into position, keeping it flush with the leg frames and then fix down using the 70mm coach screws.
Place the Angled Table Braces into position, keeping them central to the parasol support and the center slat of the table top, apply
pressure and screw into place

Place the seat top upside down and position the seat legs, as shown in pictures 2 and 3. Screw into position with the 70mm coach
screws.
Hold the seat angled supports on the central seat slat and on the leg divide line (shown in picture 2), apply pressure and secure
into position.

FINISHED PRODUCT
Stand the seat units in position, ensuring they finish flush with the ends of the leg brace, and then fix into place with the 70mm
coach screws.