Rutland county garden furniture Wall mounted pergola User manual

Assembly Instructions

Rutland Wall Mounted

Pergola

Before you commence the assembly process, we recommend that you read these instructions

thoroughly beforehand to familiarise yourself with the assembly process and to also check that you have

the correct components. If for any reason you need assistance, you can find our contact details on the

final page of these instructions.

We highly recommend that any assembly is carried out on an open flat, level surface if possible, with

sufficient space. You will also require the assistance of 2 adults to complete assembly safely.

Please note: The wall plate provided will need to be secured to a sound brick or stone wall. Fixings are not included for this stage.

Package contents

Tools required

2 x Posts

2 x 500mm diagonal braces

2x 800mm diagonal braces

2 x Runners (one to be used as wall plate)

6 x Rafters

12 x M8 Coach screws

6 x 70mm and 8 x 60mm screws

1 x Wall plate

10mm socket drive

Electric screwdriver with No2 Pozidrive bit

Or No2 Pozidrive Screwdriver

Platform or Step ladder

Laser or Spirit level

Electric drill

5 wall fixings for wall plate

The Rutland Wall Mounted Pergola

Rutland Wall Mounted Pergola

Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,

Aslackby, Sleaford, Lincs, NG34 0HZ.

Company No: 11025348 VAT No: 282569762

Step 1

Step 2

Ensure that you have all of the correct parts as listed

on the front page of these instructions, including any

fixings. (One of each main `component is shown here)

Work out where you wish to affix your wall plate,

ensuring that it is positioned so that the area directly

in front of it is flat, level and able to support the

structure. Also check that the longer side is at the

top.

Step 3

Step 4

IMPORTANT: The distance from ground level to the

top edge of the wall plate must match the height of

your post tops above ground level –bear this in mind

if you are shortening the posts or sinking them in.

Attach the wall plate using suitable fixings for the wall

construction. Measure in 400mm from each end and

use 5 fixings distributed evenly and vertically centred

across the wall plate secure it to the wall, making

sure it is horizontal with a laser or spirit level.

Rutland Wall Mounted Pergola

Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,

Aslackby, Sleaford, Lincs, NG34 0HZ.

Company No: 11025348 VAT No: 282569762

Step 5

Step 6

Lay down one of the posts with the slot parallel to the

ground as shown.

Now slot the remaining runner into the top of the

post as shown using the pencil mark to align the

runner with the outer edge of the post.

Step 7

Step 8

Place one of the diagonal braces is place, adjusting

the post angle if necessary, so that it butts snugly up

to the inner edge of the runner and post. This ensures

that it is set at 90°.

Fix the post into place on the runner using 2 x longer

screws and then affix the diagonal brace using 2 x

shorter screws as shown.

Rutland Wall Mounted Pergola

Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,

Aslackby, Sleaford, Lincs, NG34 0HZ.

Company No: 11025348 VAT No: 282569762

Step 9

Step 10

A 4.2 or 4.8M version will have an extra post midway

along each runner. Align and attach it as in Step 3 and

4...

...and attach 2 braces, one to each side as shown

using the longer green screws.

Step 11

Step 12

Repeat steps 5 to 10 complete the end frame

assembly.

Now stand the end frame up vertically as shown using

2 assistants and manoeuvre it into place so that is it

approximately in place, parallel to and about the

length of a rafter away from the wall plate.

Rutland Wall Mounted Pergola

Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,

Aslackby, Sleaford, Lincs, NG34 0HZ.

Company No: 11025348 VAT No: 282569762

Step 13

Step 14

Now slot the first rafter in place so that it sits on the

outside edge and butted to the post as shown…

…and the other end is aligned between the pencil

marks on the wall plate. If necessary adjust the

position of the end frame to get everything square

and properly positioned.

Step 15

Step 16

Fix the first rafter into place with a coach screw down

through the top face into the wall plate and the end

frame..

Now repeat steps 13 to 15 for the second outside

runner.

Rutland Wall Mounted Pergola

Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,

Aslackby, Sleaford, Lincs, NG34 0HZ.

Company No: 11025348 VAT No: 282569762

Step 17

Step 18

Add the longer diagonal braces to the frame

assembly…

…by first butting the bottom face to the post inner

edge...

Step 19

Step 20

… and then sliding it up the post so that the top edge

becomes flush with the top, inner edge of the rafter

before securing into place with 2 x shorter green

screws (do not over tighten).

Ensure the bottom of the brace is flush with outer

edge of the post before securing with a further

shorter green screw. Repeat steps 17 to 20 to add the

second brace.

Rutland Wall Mounted Pergola

Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,

Aslackby, Sleaford, Lincs, NG34 0HZ.

Company No: 11025348 VAT No: 282569762

Step 21

Step 22

Continue adding the remaining rafters, lining them up

by using the pencil markings on the wall plate and

runner...

...before lowering into place and securing with a

coach screw in each end, as you did with the outer

rafters…

Step 23

Step 24

…until all of the rafters are in place.

Your Rutland wall mounted pergola is now complete.

Rutland Wall Mounted Pergola

Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,

Aslackby, Sleaford, Lincs, NG34 0HZ.

Company No: 11025348 VAT No: 282569762

Optional Step

Attach the optional Pedestal panels to the bottom of

each post as shown. Line up each panel on the post

so that it is flush with the bottom face and secure

each one into place with 4 x woodscrews.

We hope that you found your product quick and easy to assemble but if not and you require any

further assistance or have any questions you can contact us by telephone on: 01778 440803

Email: [email protected]

www.rutlandcountygardenfurniture.co.uk

Table of contents

Other Rutland County Garden Furniture Outdoor Furnishing manuals