Rydeen BP1 User manual

Owner’s Manual
Backpack Adaptor for Mirror Stem
Mirror Stem VSM-AV
Fit Most Vehicles
Backpack Plate
Screws
Note: Screws size: a (PM2.5*8mm), b (PM3*10mm).
Package List:
Insert Backpack Adaptor for Mirror Stem
onto mirror.
Use provided VSM-AV mount.
Screw s size:
PM3*1 0mm
MIC
Sc rews si ze:
PM 2.5*8 mm
Model No: BP1
Product Introduction:
Installation:
The BP1 is an adapter back plate to convert the
Rydeen 10-inch high-definition borderless touch
screen rearview mirror (TOMBO 360, TOMBO
360X, 360 VIEW, SM1 & DC1) from DIY install to a
replacement mirror. Please read this manual for
installation instruction.
D-Tab
L-shaped Tool
for MV Series

Owner’s Manual
Model No: BP1
Technical Support Contact Info:
For any questions about BP1, please contact your retailer or RYDEEN Technical Support:
One Year Limited Warranty:
If any problems develop with your Rydeen products during or after the Limited Warranty Period, or if you have any questions
regarding the operation or installation of the product, you should contact your Rydeen retailer. If the problem or your question
is not handled to your satisfaction, please contact Rydeen Customer Service Department at 1-877-777-8811 (within the USA
only) Monday-Friday between 9:00 AM to 4:00 PM Pacific Standard Time or visit www.rydeenmobile.com.
RYDEEN MOBILE (a manufacturer of "RYDEEN" products) warrants products (BP1) only to the original purchaser as described
following:
Warranty Period
Rydeen warrants this product for a period of one (1) year from the original purchase date.
Warranty Coverage
This warranty covers all defects in material and workmanship except as specified below.
1. Any products distributed outside of the USA by Rydeen North America, Inc. (Rydeen) or which is not purchased in the USA
or Canada unless the product is purchased through the USA Military Exchange Service.
2. Any product(s) which are purchased from an unauthorized retailer (in store or online).
3. Any products in which the serial number label or the model number label are removed, torn, modified or replicated.
4. Any damage defects or malfunctions resulting from any of following:
a) When defect occurs during shipment of product (freight carrier's responsibility).
b) Installation or removal of product.
d)
Any repair or attempt to repair without RYDEEN authorization.
c)
Accidents, act of nature, misuse, abuse, neglect, unauthorized product modification or
Any other cause which is not related to product defect.
e)
Any cosmetic damages due to normal wear and tear.
)
f Any consumable items (such as fuse or batteries).
g)
failure to follow product owner's manual instructions.
Email: [e-mail]
Web: https://rydeenmobile.com/contact-support/
·
·
·Phone: [phone] (within USA only) or 1-310-787-7880