Rydeen DG240 Instruction Manual

www.rydeenmobile.com
Rydeen North America Inc.
dba Rydeen Mobile Electronics
2701 Plaza Del Amo, Suite 705, Torrance, California 90503 USA
Phone: [phone] Fax: [phone]
Copyright © 2013 Rydeen North America Inc. All Rights Reserved.
These materials are protected by copyright law and international treaties. Any unauthorized use, reproduction or distribution of these materials, or any portion
herein, will result in severe civil and criminal penalties and fines. Violators will be prosecuted to the fullest extent of the law.
CAUTION:
1. This product is suitable for 12V power
2. Please consult a certified installer to install product
3. The wire harness must avoid high temperature and high pressure location
4. Any exposed wire must be insulated properly
5. Check functions and test the device after installation
Wireless Installation Kit
For Back Up Camera
Model:DG240
Installation/User’s Manual
Receiver
Transmitter

60g
66X35X12mm
DC 12~24V
50MMAX
2400d24835MHz
4420dBBW
16QAMQPSKBPSK
14dBm&16QAMEVM5
18dBm&QPSKEVM8
72dBm@QAM, -85dBm@QPSK
OOOO
-10 C~+50 C/14 F~122 F
15%~85%RH
60ұ
66X35X12mm
DC12V&250mA!DC24V&150mA
DC 12~24V
50MMAX
2400d24835MHz
4420dBBW
16QAMQPSKBPSK
14dBm&16QAMEVM5
18dBm&QPSKEVM8
72dBm@QAM, -85dBm@QPSK
IP66
65mA±10
1Vp-p±0.2@75ȍ
"05Lux
OO
80 (NTSC), 82 (PAL)
DC12V±0.5V
1Vp-p±0.2
14CMOS
656X488
NTSCPAL
3UJKR *-
*- #:XGTYSOZZKX8KIKO\KX
WirelessTransmitter box:1
Transmitter box
Wireless Transmi-
tter box:
RYDEEN DG240
Wired camera

DG240
Wireless Receiver
Monitor
Blackline
Redline
Prompts:
Transmitter
Receiver
Quick Start Guide
Camera
Camera
TransmitterReceiver
Unobstructed Effective Range
Unobstructed Effective Range
Power Supply
Weight
Receiving Sensitivity
Weight
Dimensions (W X D X H)
Receiving Sensitivity
Power Supply
Video output
Dimensions (W X D X H)
Operation Humidity
Operation Temperature
Transmission Power
Power
Modulation/Demodulation Mode
Modulation/Demodulation Mode
Image Sensor
Effective Pixels
Video Format
Minimum illumination
View Angle
Consumption Current
Video output
Power Supply
Waterproof Capacity
Consumption Current
Transmitter
Transmitter
Transmitter box
Frequency
Transmission Frequency
Data Bandwidth
Data Bandwidth
6GIQOTM2OYZ 9VKIOLOIGZOUTY
Product Structure: Installation Wired Camera:
Wired Camera
Bracket
Camera Lens Video Output
Wireless Receiver
Wireless
Indicator
'TZKTTG
Connect the vehicle
power supply
Connect the vehicle
power supply
Video Input
Pairing
Video Output
Indicator
'TZKTTG
Pairing
1. In the proper position of rear license plate
drill a screw hole for mounting screw.
2. Use a screwdriver to the first screw is screwed
into the screw hole of the drilled.
4. After adjustments, mount and tighten the 2nd
screw to secure the camera
Wiring diagram and pairing set up:
Wired camera+Wireless Transmitter box:
Rear
lamp
Blackline
Redline
Rear
lamp
Wireless Receiver:
Wireless Receiver
Wireless
1. This product is suitable for 12V power
2. Please find a certified installer to install the product
3. The wire harness must avoid high temperature
and high pressure location
4. Any exposed wire must be insulated
W
RCA video to camera cable Adaptor:1
Male to Female RCA Cable:1
ireless rKIKO\KX 
Pairing: After devices have been succesfully connected, press and hold the pair button on the wireless Transmitter
box for 3 seconds, indicator light starts to flash. Then in 30 seconds, to press and hold the pair button on
the wireless receiver for 3 seconds, until the indicator light flashes, equipment began to pair. Until the
indicator light stops flashing, you can view image in the corresponding display equipment.
3. Move the camera angle to adjust
the display image.

Rydeen North Amer ic a Inc. (a manufacturer of " Rydeen" products ) warrants the product only to the original purchaser as described following:
Warranty Period
Rydeen warrants this product for a period of one (1 ) year from the original purchase date .
Warranty Coverage
This warranty covers all defects in material and workmansh ip except as specified below .
1.1nstallation
by anyone other than an authorized Rydeen Mobile Retailer voids the warranty .
2.Any products distributed outs i de of the USA by Rydeen North America Inc. ( Rydeen) or which is not purchased in the USA or Canada unless
the product is purchased through the USA Mili tary Exchange Service .
3.
Any product (s) which are purchased from an unauthorized retailer (in store or online) .
4.
Any products in which the serial number label or the model number label are removed , torn, modified or replicated.
5.Any damage defects or malfunct i ons resulting from any of following :
a)
When defect. occurs during shipment of product (freight carrier's responsibility).
b .) Installat ion or removal of product.
c)
Accidents , act of nature , misuse , abuse , neglect , unauthorized product modification or failure to follow product
owner's manual instructions .
d)Any
repair or attempt to repair without RYDEEN authorization.
e)Any other cause which is not related to product defect.
f )
Any cosmetic damages due to normal wear and tear.
g)Any
consumable items (such as fuse or batteries).
If any problems develop with your Rydeen products during or after the Limited Warranty Period, or if you have any questions regarding the
operation or i nstallat ion of the product , you should contact your Rydeen retailer . If the problem or your question is not handled to your
sat i sfaction , please contact Rydeen Customer Service Department at 1-877-777-8811 (within the USA only) Monday- Friday between 9: 00
AM to 4: 00PM Pac i fic Standard Ti me or visit www.rydeenmobi l e.com.
find y o ur roa d
rydeenmobile . com
R ydee n North Amer ica Inc ,
dba
Ry d een Mobile Elect r onics
®
2701 Plaza Del AMO , Suite 705,Torrance, Californ ia 90503 USA
P hone :1- 877 - 777 -8811 Fax:[phone]