SAFAVIEH COUTURE Citine SFV4743 User manual

CARE AND MAINTENANCE
NOTICE
Weight Capacity: 275 lbs
WARNING: DO NOTSTAND ON CHAIR
WARNING: DO NOTOVER TORQUE BOLTS/SCREWS
4X
BBase 1X
4X
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY
SAFAVIEH
C O U T U R E
The base and hardware are on the top of the chair.
4X
Allen Key 1X
ASeat 1X
Spot clean using a mild water-free solvent. Only a professional cleaner should
undertake a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or staining.
* Please make sure that you have all parts indicated before you begin assembly of
this item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening
Dimensions:
SFV4743 31.10"*32.28"*29.53"
Split Lock Washer(M6)
Flat Washer(M6)
Socket Screws 6*1.05*30MM
HW1
HW2
HW3
HW4

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen key
The base and hardware are on the top of the chair.
STEP1 THE BASE IS ON THE TOP OF THE CHAIR, OPEN
TO TAKE THE BASE AND HARDWARE
STEP2 PUT WASHERS ON THE SOCKET SCREWS IN THE ORDER
SHOWN IN THE PICTURE.
STEP3 INSERT THE BASE AND SCREW IN THE SCREWS
BUT DON'T TIGHTEN COMPLETELY.
STEP4 PUT THE CHAIR UPRIGHT AND MAKE SURE THE BASE IS LEVEL,
THEN FIRMLY TIGHTEN BOLTS WITH ALLEN KEY WHILE THE CHAIR IS
UPRIGHT AS PICTURED ABOVE
B
HW2 HW1 HW3
HW4
A