SAFAVIEH COUTURE Sharyn SFV5113 User manual

NOTICE
*Please make sure that you have all parts indicated and they are in good condition before you
begin assembly of this item. Refer to part list and hardware list below for guidance.
*This item should be assembled on a soft surface to prevent scratching the finish during assembly.
*This item may require periodic tightening.
*If you are having difficulty, our friendly Customer Care team is always here to help.
Please email customersuppo[email protected]m
PREPARATION
Model# SFV5113
*Before beginning assembly of product, make sure all parts are present. Compare parts with
Product Dimensions: 62.40" W x 19.70" D x 16.50" H
part contents list and hardware contents list.
*If any part is missing or damaged, do not attempt to assemble the product.
*Estimated Assembly Time: 15 minutes.
*Tools Required for Assembly (included): Allen Key
CARE AND MAINTENANCE
Spot clean using a mild water-free solvent. Only a professional cleaner should undertake
a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or staining.
Parts List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY
ASeat 1X
BLegs 2X
CWood Bar 1X
DMetal parts 4X
HW1 Bolt M8 x 25MM 8X
Weight Capacity: 550 lbs
HW2 Bolt M8 x 50MM 2X
WARNING: DO NOT STAND ON BENCH
HW3 Spring Washer 8.5 mm 10X
WARNING: DO NOT OVER TORQUE BOLTS
HW4 Flat Washer 9 mm 10X
HW5 Allen Key 1X

PREPARATION
*Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
*If any part is missing or damaged, do not attempt to assemble the product.
*Estimated Assembly Time: 15 minutes.
*Tools Required for Assembly (included): Allen Key
*If you are having difficulty, our friendly Customer Care team is always here to help. Please email [e-mail]
STEP 1：Please take out the legs from the pocket on the
bottom.
STEP 3：Please firmly tighten bolts with allen key.
STEP 4：Please assemble the legs on the seat as above
photo.
STEP 5：Please firmly tighten bolts with allen key.
STEP 2：Please assemble the legs in the order shown.
HW2
HW3
HW4
HW5
C
B
B
B B
C
HW5
HW1
HW3
HW4
B
B
C
D
D
D
D
A
8X
2X
A
B
B
C
STEP 6：Put the bench upright and make sure the legs
are level. If the bench slight wobble, you can adjust with
the gliders.
Legs inside here.
A