SAFAVIEH COUTURE SFV4112-K User manual

* Before beginning assembly of product, make sure all parts are present. Compare parts with
part contents list and hardware contents list.
* If any part is missing or damaged, do not aempt to assemble the product.
* Esmated Assembly Time: 45 minutes.
* Tools Required for Assembly (included): Allen Key, (Not included): Phillips Screwdriver.Spanner;
PREPARATION
CARE AND MAINTENANCE
NOTICE
* Please make sure that you have all parts indicated and they are in good condion before you
begin assembly of this item. Refer to part list and hardware list below for guidance.
* This item should be assembled on a so surface to prevent scratching the finish during
assembly.
* This item may require periodic ghtening.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please
email [e-mail]
* Spot clean using a mild water-free solvent. Only a professional cleaner should undertake
a complete overall cleaning.
* The use of steam or water-based cleaners may cause excessive shrinking or staining.
Warning: DO NOT STAND ON BED
Weight capacity: 800lbs
Warning: DO NOT OVER TORQUE BOLTS
!!
WARNING
C O U T U R E
Item ID: SFV4112-K
Product Dimensions: 92 1/3”W x 89 3/4”D x 43 1/3”H

PIECE QUANTITY
DESCRIPTION CARTON CALL PIECE QUANTITY DESCRIPTION CARTON CALL
Part List and Hardware List
6XH
SLATS 5X I
3 of 3
3 of 3
3 of 3
HW5
Nut 8mm 4X
3 of 3
3 of 3
3 of 3
3 of 3
3 of 3
3 of 3
3 of 3
Spanner
Metal palte
Support bar
Medium cross bolt (1) 8x0.5x40mm
Spring washer (black) 8mm
Flat washer (black) 8mm
Small cross bolt (1) 8x0.5x20mm
1X
2X
6X
30X
46X
46X
16X
CENTRER LEGS
3 of 3
3 of 3
3 of 3
3 of 3
HW1 Wooden dowel Ø10mm
Metal thread 8x0.5x70mm
Semicircle washer 7x15x30mm
Spring washer 8mm
6X
4X
4X
44X
HW2
HW3
HW4
HW6
HW7
HW8
HW9
HW10
HW11
HW12
HEADBOARD
BOTTOM FRAME
FOOTBOARD
A
B
C
1 of 3
1X
2 of 3
2 of 3
3 of 3
1X
1X
2X
D
E
F
G
SIDE RAILS
CORNER BLOCK
LEGS
CENTRE SUPPORT RAIL
3 of 3
3 of 3
3 of 3
4X
4X
2X
3 of 3
3 of 3
3 of 3
Medium cross bolt (2) 8x0.5x50mm
Flat washer 8mm
Big cross bolt 8x0.5x100mm
32X
40X
8X
HW13
HW14
HW15
3 of 3
Screw 4x0.5x30mm 10X
HW16
3 of 3
Small cross bolt 6x0.5x40mm 6X
HW17
3 of 3
Allen key 1X
HW18

* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
* If any part is missing or damaged, do not aempt to assemble the product.
* Esmated Assembly Time: 45 minutes.
* Tools Required for Assembly (included): Allen Key, ; (Not included): Phillips Screwdriver.Spanner
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [e-mail]
PREPARATION
HW1
D
E
E
STEP 1: Assemble wooden dowel (HW1) in the side rail (D). STEP 2: Aach Metal palte (HW7) and (B) by small cross boom frame
bolt (HW12), spring washer (HW10) and Flat washer (HW11) as shown.
Atach side rail (D) by medium cross bolt (HW13),corner block (E) and
HW13
HW4
HW14
HW18
HW1
HW18
HW12
HW11
HW10
HW7
B
spring washer (HW4) and Flat washer (HW14).

STEP 3: Aach (F) and centre legs (G) by cross bolt (HW8) centre support rail
G
H
HW18
HW17
H
as shown.
H
STEP 4: Aach (B), (C) and side rail (D) byboom frame footboard
metal thread (HW2) as shown.
D
D
C
B
HW2

STEP 5: Assemble Semicircle washer (HW3), spring washer (HW4) and nut (HW5) in the structure in Step 4
HW6
HW5
HW4
HW3
HW14 HW4 HW13
HW18
Assemble medium cross bolt (Hw13), spring washer (HW4) and Flat washer (HW14) in the structure in Step 4 as show.

Step 6: Assemble medium cross bolt (HW15), spring washer (HW4) and Flat washer (HW14) in the structure in Step 5 as show.
HW14
HW4
HW18 HW15

Step 7: Assemble (A) on to the structure in Step 6 using small cross bolt (HW12), spring washer (HW10) and Flat washer (HW11).headboard
Assemble medium cross bolt (HW9), spring washer (HW10), flat washer (HW11), Support bar (HW8) in the structure as show.
HW12
HW10
HW11
HW18
HW10
HW11 HW9
HW8
HW8
A

STEP 8: Attach the structure in Step 3 to the structure in Step 7 as show. STEP 7: Insert the slats into the side and central rail and secure using screw (HW16).
HW16
I
I
I