SAFAVIEH COUTURE SFV4732 User manual

CARE AND MAINTENANCE
NOTICE
WARNING: DO NOT STAND ON
WARNING: DO NOT OVER TORQUE BOLTS/SCREWS
HW2 Flat Washer(M6)
B Legs 4X
HW1 Split Lock washer(M6) 8X
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY
SAFAVIEH
C O U T U R E
The legs and hardware are located underneath the
Chair in the zipper compartment
HW3 Socket Screws 6*1.05*65MM
HW4 Allen Key 1X
A Seat 1X
Spot clean using a mild water-free solvent. Only a professional cleaner should
undertake a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or staining.
* Please make sure that you have all parts indicated before you begin assembly of
this item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening SFV4732
Dimensions:
CHAIR
8X
8X
Chair in the zipper compartment
37.01''W*37.60''D*33.66''H
Weight Capacity: 275 lbs

PREPARATION
STEP3 INSERT THE LEGS AND SCREW INTO THE SEAT
HOLES AND TIGHTEN THE BOLTS BY USING ALLEN KEY.
The legs and hardware are located underneath the Chair in the
zipper compartment.
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents
list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen key
STEP1 OPEN THE ZIPPER ON THE UNDERSIDE OF THE
SEAT AND TAKE OUT LEGS AND HARDWARE
STEP2 PUT THE WASHERS ON THE SCREWS IN
THE ORDER SHOWN IN THE PICTURE
HW2 HW1 HW3
STEP4
CLOSE THE ZIPPER ON THE UNDERSIDE OF
THE SEAT AND PUT THE CHAIR UPRIGHT.
A
HW4