SAFAVIEH COUTURE Trenton SFV9717 User manual

ITEM ID : SFV9717
PRODUCT DIMENSION : 20"WX20"DX20"H
NOTICE
PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with part
contents list and hardware contents list.
* If any part is missing or damaged, do not aempt to assemble the product.
* Esmated Assembly Time: 10 minutes.
* Tools Required for Assembly (included): Allen Key
* Require 2 person for assembly.
CARE AND MAINTENANCE
- Blot up spills immediately, always use coasters on table tops under beverages. Use trivets or mats
under hot dishes or cookware. Clean with warm water and dry surface immediately aer cleaning.
Do not use cleaners that contain acid such as bathroom cleaners, grout cleaner, and le cleaners.
Do not use abrasive cleaners in either dry or liquid forms. Use a cleaner and polish formulated for
marble surfaces.
PARTS & HARDWARE LIST
Marble Top
Legs
JCB Bolts 35x8mm
Flat Washer 25x8mm
Allen Key 5mm
A
B
HW1
HW2
HW3
1x
1x
4x
4x
1x
Piece Descripon Picture Quanty Carton call
1 of 2
2 of 2
1 of 2
1 of 2
1 of 2
WARNING
* Please make sure that you have all parts indicated and they are in good condion before you begin
assembly of this item. Refer to part list and hardware list below for guidance.
* This item should be assembled on a so surface to prevent scratching the finish during assembly.
* This item may require periodic ghtening.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email
[e-mail]
- Always use felt pads under all arcles to prevent discoloraon or soening of the lacquer. Plasc
and rubber bases on items can discolor wood. On highly used surfaces we recommend applying
a quality paste wax which should be used on a regular basis to provide addional protecon from
scratches and spills. How oen you apply the wax depends on how much wear the furniture receives.
C O U T U R E
Weight Capacity : 55lbs
WARNING : DO NOT STAND/SIT ON SIDE TABLE
WARNING : DO NOT DRAG SIDE TABLE
WARNING : HEAVY PRODUCT

PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
* If any part is missing or damaged, do not aempt to assemble the product.
* Esmated Assembly Time: 10 minutes.
* Tools Required for Assembly (included): Allen Key
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [e-mail]
STEP 1: Place marble top (A) upside down on a so surface and
gently place the legs (B) on top with the screw holes lined up.
HW1
HW3
Hw2
STEP 2: Aach the Legs (B) to the top (A) by using the Allen Key
(HW3) to screw in the JCB Bolts (HW1) through the Washers (HW2).
B,1x
A,1x
STEP 3: Product is now ready for use.