SAFAVIEH COUTURE SFV4710 User manual

CARE AND MAINTENANCE
NOTICE
4X
B 1X
4X
C 1X
SAFAVIEH
The base and hardware are located around the
chair
4X
1X
A1X
Spot clean using a mild water-free solvent. Only a professional cleaner should
undertake a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or staining.
staining.
* Please make sure that you have all parts indicated before you begin assembly of
this item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening
C O U T U R E
WARNING: DO NOT STAND ON CHAIR
WARNING: DO NOT OVER TORQUE BOLTS/SCREWS
1X
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY
CARE AND MAINTENANCE
HW1
HW2
HW3
HW4
Chassis
Seat
Pedal
SFV4710
Dimensions:21.26"*21.26"*35.43"~43.70"
Weight Capacity: 275 lbs
D Air Bolt Pole
Allen Key
Split Lock Washer(M6)
Flat Washer(M6)
Socket Screws 6 *1.05*30MM

PREPARATION
C
A
↓
D
B
↓
HW2 HW1 HW3
HW4
STEP4 PUT THE AIR BOLT POLE INTO THE CHASSIS
WOLE, IT WILL CONNECT FIRMLY ONCE SOMEONE SITS
AFTER FINISHED
The base and hardware are located around the chair
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.If any part is missing or
damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen key
STEP1 OPEN THE CARTON BOX AND TAKE OUT BASE
AND HARDWARE
STEP2 PUT THE WASHERS ON THE BOLT IN THE
ORDER SHOWN IN THE PICTURE
STEP3 INSERT THE PEDAL AND SCREW IN THE
BOLTS. REPEAT THE SAME STEPS FOR THE OTHER
THREE.
STEP5 PUT THE FINISHED PERT OF STEP3 AND STEP4
TOGETHER, IT WILL CONNECT FIRMLY ONCE
SOMEONE SITS AFTER FINISHED
STEP6 FINISHED.