SAFAVIEH COUTURE SFV2307 User manual

* This item may require periodic tightening
PREPARATION
PIECE QUANTITY Carton Call
A5X 1of 2
B10X 2 of 2
C4X 2 of 2
D20X 2 of 2
HW1 20X 2of 2
HW2 1X 2 of 2
ALLEN BOLT
(6x0.5x35mm)
ALLEN KEY
* Before beginning assembly of product, make sure all parts are present. Compare parts
with part contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 20 minutes.
* Tools Required for Assembly (included): Allen Key
Shelf holder bar
Leg
Wood block
CARE AND MAINTENANCE
Always use felt pads under all articles to prevent discoloration or softening of the lacquer.
Plastic and rubber bases on items can discolor wood. Wipe up spills immediately and avoid
common hazards such as hot dishes, harsh solvents and abrasives. Cleaning should be
done with a soft lint free cotton cloth dampened with water or furniture polish. On highly
used surfaces we recommend applying a quality paste wax which should be used on a
regular basis to provide additional protection from scratches and spills. How often you
apply the wax depends on how much wear the furniture receives.
Part List and Hardware List
DESCRIPTION
PICTURE
Shelf
NOTICE
* Please make sure that you have all parts indicated and they are in good condition before
you begin assembly of this item. Refer to part list and hardware list below for guidance.
* This item should be assembled on a soft surface to prevent scratching the finish during
assembly
* If you are having difficulty, our friendly Customer Care team is always here to help.
Please email cu[email protected]
Model# :SFV2307A
Product Dimensions: 40.5''Wx19''Dx72''H

PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 20 minutes.
* Tools Required for Assembly (included): Allen key
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email customersu[email protected]
Step 1: Insert the Shelf holder bars (B) in to the Legs (C). Then
insert the wood block (D) in to the bar as shown.
Step 2: Put the shelves (A) on to the legs. Use the Allen Key (HW2) to screw in the Bolts
(HW1) from underneath the bar.