SAFAVIEH COUTURE Rynaldo SFV4812 User manual

12X
B Legs 4X
12X
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY
SAFAVIEH
12X
Allen Key 1X
ASeat 1X
Model#: SFV4812
Dimensions:19.7"WX22.0"DX33.5"H
C O U T U R E
Split Lock Washer(M8)
Flat Washer(M8)
Socket Screws 6*1.25*30MM
HW1
HW2
HW3
HW4
Warning: Do not stand on Chair
Warning: Do not over torque bolts
Weight Capacity: 275 lbs
* Before beginning assembly of product, make sure all parts are present. Compare parts with
part contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 10 minutes.
* Tools Required for Assembly (included): Allen Key
PREPARATION
CARE AND MAINTENANCE
* Spot clean using a mild water-free solvent. Only a professional cleaner should undertake a
complete overall cleaning.
* The use of steam or water-based cleaners may cause excessive shrinking or staining.
NOTICE
* Please make sure that you have all parts indicated and they are in good condition before you
begin assembly of this item. Refer to part list and hardware list below for guidance.
* This item should be assembled on a soft surface to prevent scratching the finish during
assembly.
* This item may require periodic tightening.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please
email [email protected]

STEP1 OPEN THE CARTON AND TAKE OUT LEGS
AND HARDWARE STEP2 PUT THE WASHERS ON THE SCREW IN THE
ORDER SHOWN IN THE PICTURE
STEP4 REPEAT THE SAME STEPS FOR THE OTHER
THREE LEGS
STEP5 PUT THE CHAIR UPRIGHT AND MAKE SURE ALL LEGS ARE
LEVEL, THEN FIRMLY TIGHTEN BOLTS WITH ALLEN KEY WHILE
THE CHAIR IS UPRIGHT AS PICTURED ABOVE(IF THE CHAIR
WOBBLY, YOU CAN EASY ADJUST LEG BOTTOM PLASTIC SCREW)
HW2 HW1 HW3
* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 10 minutes.
* Tools Required for Assembly (included): Allen Key
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [email protected]
PREPARATION
HW4
BB
BB
HW1
HW4 B
HW2
HW3
STEP3 INSERT THE LEGS AND SCREW IN THE
SCREWS BUT DON'T TIGHTEN COMPLETELY.