SAFAVIEH COUTURE Warren SFV4750 User manual

CARE AND MAINTENANCE
NOTICE
BLegs
HW1
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY
SAFAVIEH
C O U T U R E
HW3
HW4 Allen Key 1X
ASeat 1X
Spot clean using a mild water-free solvent. Only a professional cleaner should
undertake a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or staining.
* Please make sure that you have all parts indicated before you begin assembly of
this item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening
HW2 Flat Washer(M8) 8X
Split Lock Washer(M8) 8X
2X
8X
The legs and hardware are located underneath the bench in the zipper
compartment.
WARNING: DO NOT STAND ON BENCH
WARNING: DO NOT OVER TORQUE WASHER/SCREWS
SFV4750
Dimensions:24.02"*16.73"*16.73"
Weight Capacity: 275 lbs
Socket Screws 8*1.25*40MM

PREPARATION
STEP4
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any partismissing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen key
HW2 HW1 HW3
STEP2 PUT THE WASHERS ON THE SCREW IN THE ORDER SHOWN IN
THE PICTURE
PUT THE BENCH UPRIGHT AND MAKE SURE ALL LEGS ARE LEVEL,
THEN FIRMLY TIGHTEN BOLTS WITH ALLEN KEY WHILE THE BENCH IS
UPRIGHT AS PICTURED ABOVE.
The legs and hardware are located underneath the bench in the zipper compartment.
STEP1 OPEN THE ZIPPER ON THE UNDERSIDE OF THE SEAT AND TAKE
OUT LEGS AND HARDWARE
A
STEP3 INSERT THE LEGS AND SCREW IN THE SCREWSBUT DON'T
TIGHTEN COMPLETELY.
HW2 HW1 HW3
B
B
HW4