Safety Basement SB-WA0506AB User manual

ank you for purchasing from SafetyBasement.com! We appreciate your business.
We made this simple manual to help you enjoy your new product as quickly and easily as
possible.
Be sure to check the TECH SUPPORT tab on your product page at SafetyBasement.com
for the latest available manual.
INSTRUCTION MANUAL
Six-Multi Sensor Wireless Alarm System
SB-WA0506AB
Revised: October 15th, 2013

Page 2
PRODUCT MANUAL Multi-Sensor Wireless Alarm Sstem: WA0506AB
www.SafetyBasement.com Phone: [phone] Fax: [phone]
PRODUCT REFERENCE
Motion Sensors
Door/Window
Magnetic Sensors
Remote Controllers
Base control unit
3 pieces Wall mounts for
motion sensors
3 pieces sticky mounts for
Magnetic Sensors

PRODUCT MANUAL Wireless Alarm System: SB-WA0506AB
Page 3
www.SafetyBasement.com Phone: [phone] Fax: [phone]
BEFORE YOU START
IMPORTANT: Please make sure there are batteries in all the units before you start. ere
are batteries in the magnetic sensors but you will need to buy batteries for the MAIN UNIT
and for the MOTION SENSORS. Please make sure batteries are fully charged and for each
unit you use the same type of batteries. Example if you use Duracell make sure you use
Duracell batteries for all units.
Please insert 3 AA batteries for MAIN UNIT
Move switch on MAIN UNIT side to either ALARM or CHIME. Move to ALARM if you want
alarms to go o when any of the sensors are triggered, or move to CHIME if you are using this
unit as a notication system. For example in a store during the day when visitors come in the
unit will chime. en at night you can move switch to ALARM to turn it into a security system
PREPARING MAIN UNIT
MAIN UNIT FRONT MAIN UNIT SIDE CONTROS
Alarm
OFF
Chime

Page 4
PRODUCT MANUAL Wireless Alarm System: SB-WA0506AB
www.SafetyBasement.com Phone: [phone] Fax: [phone]
BEFORE YOU START continued
Each magnetic sensor has three position
settings.
1. RF + ALARM: is setting means that
when unit is triggered both the MAIN
UNITand the MAGNETIC sensor will sound
an larm
2. RF: is setting means that only the MAIN
UNIT will alarm when the sensor is triggered
3. OFF: is setting turns o the magnetic
sensor from alarming or triggering the main
unit.
Each magnetic sensor should include
batteries.
MAGNETIC SENSORS
Magnetic Sensor Switch

PRODUCT MANUAL Wireless Alarm System: SB-WA0506AB
Page 5
www.SafetyBasement.com Phone: [phone] Fax: [phone]
BEFORE YOU START continued
Please insert 3 AAA batteries into each
motion sensor.
MOTION SENSORS
REMOTE CONTROLLERS
Each remote controller comes with an ON/
OFF switch to turn main unit ON(ARM)
and OFF(DISARM).
Batteries are included in the remote
controllers

Page 6
PRODUCT MANUAL Wireless Alarm System: SB-WA0506AB
www.SafetyBasement.com Phone: [phone] Fax: [phone]
SETTING UP SYSTEM
is wireless sensor system is already paired so that all you need to do is install the sensors
where you need to.
It is also made very easy to understand by numbering each sensor. to correspond to a
number on the main unit.
Write down the entry way on the main unit that the numbered sensor is placed. For example
if sensor number one is placed on the FRONT DOOR, then write FRONT DOOR next
to number 1 on the main unit. e idea is that if any of the sensors is triggered, you will
immediately know which entry way was breached and take immediate necessary action.
e main unit is wireless so can be placed anywhere in the house. For example you may
have it in your bedroom at night. If an area is breached you will immediately know where by
seeing the corresponding light go o in the main unit and call the authorities

PRODUCT MANUAL Wireless Alarm System: SB-WA0506AB
Page 7
www.SafetyBasement.com Phone: [phone] Fax: [phone]
SETTING UP SYSTEM - Magnetic Sensors
Magnetic Sensor installation
When installing magnetic sensors please ensure that the sensor and magnetic Strip are close
enough to each other so that when the door is open, the separation will cause the alarm to be
triggered!
Each magnetic sensor and strip come with a sticky adhesive mount (see PRODUCT
REFERENCE image at top of page) to attach to door or window.
SEPARATION BETWEEN MAGNETIC SENSOR AND MAGNETIC STRIP SHOULD BE NO
MORE THAN 0.5 INCHES
Separation no more than 0.5 inches at door or window
Magnetic Sensor/Alarm
Magnetic strip

Page 8
PRODUCT MANUAL Wireless Alarm System: SB-WA0506AB
www.SafetyBasement.com Phone: [phone] Fax: [phone]
SETTING UP SYSTEM - Motion sensors
Motion sensors are trggered when MOTION is detected in an area. Best way to install is to test
unit on your self until you nd the best trigger points and distance. Please note there is a few
second delay between motion detection and alarm activation.

PRODUCT MANUAL One-Touch Voice Recorder Pen : SB-P640
Page 9
www.SafetyBasement.com Phone: [phone] Fax: [phone]
ALARM SYSTEM SET UP
Home setting for this system are pretty easy.
WINDOW/DOOR SENSORS: Set door/window sensor switches to RF + ALARM. is
ensures that both alarms at the sensor level and at the base level will go o. is maximizes
eectiveness!
MOTION SENSORS: No setting required for motion sensors.
BASE UNIT: Move switch on BASE UNIT to ALARM
CHIME SYSTEM SET UP
Home setting for this system are pretty easy.
WINDOW/DOOR SENSORS: Set door/window sensor switches to RF. is ensures that only
chime at the base unit will go o. e door window sensors do not have chime sound so if you
set it to RF+Alarm, the alarms will go o.
MOTION SENSORS: No setting required for motion sensors.
BASE UNIT: Move switch on BASE UNIT to CHIME
NOTE: If you use this at an oce where you want CHIME by day and ALARM by night, just
change settings each time to above. ank you!

Page 10
PRODUCT MANUAL One-Touch Voice Recorder Pen : SB-P640
www.SafetyBasement.com Phone: [phone] Fax: [phone]
PRODUCT MANUAL Wireless Alarm System: SB-WA0506AB
Page 10
www.SafetyBasement.com Phone: [phone] Fax: [phone]
Frequency 433 Mhz
Wireless range Up to 100 feet
DEVICE SPECIFICATIONS
Audio
Video
Photo
n/a
n/a