Safety Basement SB-WAD98910 User manual

ank you for purchasing from SafetyBasement.com! We appreciate your business.
We made this simple manual to help you enjoy your new product as quickly and easily as possible.
Be sure to check the TECH SUPPORT tab on your product page at SafetyBasement.com for the latest avail-
able manual.
INSTRUCTION MANUAL
1080P Multifunctional Home LED Alarm & DVR
SB-WAD98910
Revised: NOVEMBER 5, 2013

Page 2
PRODUCT MANUAL Multi-Functional DVR: WAD98910
www.SafetyBasement.com Phone: [phone] Fax: [phone]
PRODUCT REFERENCE
Multi-Functional
DVR
Remote controller
Charging adapter
USB power/download cable

PRODUCT MANUAL Multi-Functional DVR: WAD98910
Page 3
www.SafetyBasement.com Phone: [phone] Fax: [phone]
PRODUCT REFERENCE
HDMI port
USB Port
Retractable handle/Hook
PULL UP/PUSH DOWN
Nail/hook
hole
Set-up buttons

Page 4
PRODUCT MANUAL 16GB Pathnder IR Watch : SB-WR9800
www.SafetyBasement.com Phone: [phone] Fax: [phone]
PRODUCT MANUAL Multi-Functional DVR: WAD98910
Page 4
www.SafetyBasement.com Phone: [phone] Fax: [phone]
INSTALLING SD CARD
Please ensure that SD card is properly inserted. Read this section fully and carefully!
Remove (slide o)
back panel INSERT SD card as show
(Please note card orientation!)
FULLY INSERTED.
Push card all the way and
release. You will hear a click
in sound.
To remove, push in and re-
lease and it will click-out

PRODUCT MANUAL 16GB Pathnder IR Watch : SB-WR9800
Page 5
www.SafetyBasement.com Phone: [phone] Fax: [phone] Page 5
PRODUCT MANUAL Multi-Functional DVR: WAD98910
www.SafetyBasement.com Phone: [phone] Fax: [phone]
BEFORE YOU START
is unit can work using batteries (3xAA) or can be plugged in to an outlet via included
power cable. No ‘charging’ required. Just insert batteries or plug unit in to get started
Batteries NOT included
Power adapter

Page 6
PRODUCT MANUAL 16GB Pathnder IR Watch : SB-WR9800
www.SafetyBasement.com Phone: [phone] Fax: [phone]
PRODUCT MANUAL Multi-Functional DVR: WAD98910
Page 6
www.SafetyBasement.com Phone: [phone] Fax: [phone]
BEFORE YOU START - TURNING UNIT
Begin by turning system switch to ON
position. You will notice that this will turn
on the clock on the monitor.
System switch
Let’s set the system time. Turn to back
to reveal panels as shown below.

PRODUCT MANUAL 16GB Pathnder IR Watch : SB-WR9800
Page 7
www.SafetyBasement.com Phone: [phone] Fax: [phone] Page 7
PRODUCT MANUAL Multi-Functional DVR: WAD98910
www.SafetyBasement.com Phone: [phone] Fax: [phone]
SETTING CLOCK
1. Press SET button three times and the SECONDS button will begin to blink. Press the TIME
once and the MINUTES will begin to blink. Use the MODE button to change minutes to current.
2. Press TIME button to move to HOURS. Now use the MODE button to change that to current
hour.
3. Aer getting current hour, press TIME button to move to day of month. Enter todays date.
4. Press TIME to move to MONTH. Use MODe to adjust month to current month
5. Press TIME to move to day of week.
6. Press SET to complete set up

Page 8
PRODUCT MANUAL 16GB Pathnder IR Watch : SB-WR9800
www.SafetyBasement.com Phone: [phone] Fax: [phone]
PRODUCT MANUAL Multi-Functional DVR: WAD98910
Page 8
www.SafetyBasement.com Phone: [phone] Fax: [phone]
NOTE: You do not need to set alarm at this time. However should you want to do it later, just
return to this section to do so.
1. Press SET button twice times and the HOUR button of the alarm time will begin to blink. Press
the MODE button to adjust the hour to alarm hour you want. Keep in mind the A or P. Make
sure you are in the right HOUR of the day (AM or PM)
2. en press TIME to move to MINUTE. Press MODE button to adjust the minute button
3. Press SET to save and complete.
SETTING ALARM
To activate the alarm function, press MODE button then TIME. Not that you will need to keep
the MODE button rmly pressed while you press the TIME button.
ENGAGING ALARM FUNCTION
DEFAULT. Alarm o ALARM symbol showing alarm has
been engaged. Your alarm will go o at
set time

PRODUCT MANUAL Multi-Functional DVR: WAD98910
Page 9
www.SafetyBasement.com Phone: [phone] Fax: [phone]
SETTING TIME STAMP
NOTE: If you are going to use the video function, we highly recommend you deal with the time
stamp feature now. e time stamp feature embeds time in the video. is is useful for evi-
dentiary purposes. Should there ever be an incident, the time stamp will show exactly when it
happened!
You can turn the time stamp feature ON or OFF. Your call.
1. Make sure SD card is in DVR
2. Connect USB cable to unit and other end to computer USB port
3. Copy and save the text le from the same section you got this user manual. Save it right below
the DCIM folder (this is called the root section)

Page 10
PRODUCT MANUAL Multi-Functional DVR: WAD98910
www.SafetyBasement.com Phone: [phone] Fax: [phone]
Your DVR
(drive letter
may vary)
e TIME.TXT
le in proper
location
SETTING TIME STAMP
4. Double click the time le to open text editor. Change the information to reect current time
and whether you want the time stamp to show.