Safety Xpress REMBOLSLID User manual

www.safetyxpress.com.au
PRODUCT INFORMATION &
INSTALLATION GUIDE
1300 049 246
Specications
SKU REMBOLSLID (keyed alike)
REMBOLSLIDSS (keyed alike ss)
REMBOLSLIDU (unique lock)
REMBOLSLIDB (black unique lock)
Material Hot Dip Galvanised Steel
Colour
Powder Coated Yellow / Black or
Stainless Steel with
Class 1 Red Reective Tape
Dimensions:
Height: 1020mm
Diameter:
90mm (Pole) 200mm (Base)
Wall Thickness: 3mm
Base: 4 Mounting Holes
Keys 2 x keys provided
Item Weight 13kg
Fixings
4 x FREE Countersunk Mounting Bolts
Included per bollard
(standard xings kit)
Surface Mount Bollard
Slider Removable Key Lock
Installation:
1. Read installation guide from beginning to end.
2. Determine exactly where the bollard will
be placed. If you are installing more than one
bollard, mark the ground to ensure that you have
a straight line rst.
3. Take the slider receiver plate, drill a guide
hole in the surface, This is to mark the surface
so that you know where to continue to drill.
Continue to drill each guide hole to almost the
entire length of your xings.
Tools Required:
• Hammer drill with correct sized drill bit
• Countersunk xings
• A hand broom or industrial vacuum
4. Remove the slider plate and brush or vacuum
away any dust.
6. Secure bollard receiver plate into xing holes
with countersunk xings.
8. Slide your bollard in / out of slider receiver
plate to test a couple of time. Lock into place
using keys provided. Do not force open or
turn keys the wrong way to avoid any possible
damage.
Keys Supplied
x2
KEYED
ALIKE
22
MONTHS
MONTHS

www.safetyxpress.com.au
PRODUCT INFORMATION &
INSTALLATION GUIDE
1300 049 246
Technical Drawing
90mm Slider Removable Bollard
1020 mm
89mm
3mm
wall
200mm
90mm
130mm
4 x 14mm
26mm X 90°
12.32 kg
SHEET OF
1:5
SCALE DATE PRODUCT
90MM SLIDER REMOVABLE BOLLARD