Salamander Alex User manual

© 2006 Salamander Designs Ltd. 1 of 3
Assembly Instructions
1. Ready Pieces for Connection
Connecting Seats and Arms
Loveseat Configuration
When connecting two armless seats proceed to step 3.
Alex
ACTILE TRANSDUCER:
If you have purchased a Sound
ransducer for your chair(s),
install before connecting seats.
’s back to access
underside and screw transducer onto
the center bolt on chair frame.
Set chair on it
t
T

B. Extend foot rest to access front bolt hole and secure connection by inserting bolt through chair into arm.
There are four bolts total, only one in the front and one in the back is necessary.
C. In order to install rear bolts tip chair onto back and locate bolt holes behind base panel.
Secure connection by inserting bolt through chair into arm.
© 2006 Salamander Designs Ltd. 2 of 3
2. Connecting Seat to Arm
A. Push seat into arm brackets while aligning clamp and hook.

B. Extend foot rest to access front bolt hole and secure connection by inserting bolt through left chair into right chair.
Attach nut on right side. There are four bolts total, only one in the front and one in the back are necessary.
C. Set chairs on backs as shown. Locate bolt holes behind base panel. Secure connection by inserting bolt through
left chair into right chair. Attach nut on right side.
© 2006 Salamander Designs Ltd. 3 of 3
3. Loveseat Connection
A. Push left seat into right seat bracket while aligning clamp and hook.