Sami WEARABLE WS-2352 User manual

WEARABLE
User Manual
WS-2352
Thank you for purchasing the Sami wearable WS-2352. Read
the instructions carefully to obtain optimum results and
preserve it for future reference. Sami has developed wearable
devices since 2015 and we use the best components possible
for the product. This device is a 4G smart watch with build-in
GPS.
DESCRIPTION OF THE WEARABLE.

CONTENTS
Wearable, USB magnetic charging cable, screwdriver,
instruction manual. SIM is not included.
NOTE: Please do not throw away the tag of the IMEI Code &
Register Code which hangs on the watchband. Keep the tag
in the gift box and keep the gift box.
CHARGING
Connect the device to a computer or laptop with the USB
Magnetic cable for charging. Put in contact the magnetic
end of the usb cable with the charging points positioned in the
back of your device. Kindly use only the USB cable included
with the wearable. If you use a power adapter for charging,
the output of the power adapter should be 5V, 1A. Charging
time: 2-3 hours. Please charge the device fully before using it.
NOTE: Do not have the charger connected to AC and the
magnets touching any metallic surface, this will create a high
heating of the cable and will damage it.
HOW TO POWER ON / POWER OFF?
1) To turn ON the smart watch, long press the Power button
for a few seconds to make it Power On.
2) To turn OFF the smart watch, on the smartwatch slide in the
screen until you go to the settings menu, tap to select an

enter to it, then slide up or down, select shut down, and
select yes to make it Power Off. If the watch is binded with
the app Setracker, you can also power off from the app.
3) The smart watch will be Power Off automatically, once it is
run out of Power.
HOW TO CONTROL?
1) On the display screen (touchscreen), short tap the
touchscreen to select/enter; tap and slide
left/right/up/down to change between the different menu
pages.
2) Short press the Return Button to return. The Return Button is
situated at the centre bottom of the display screen.
3) Short press the Power Button to light up/ light off the display
screen; short press the Power Button to return to home
screen interface. Long press the Power Button to make the
smart watch Power On/SOS.
4) The SOS function(Long press the Power Button) will be
activated after the smartwatch has been registered in the
SeTracker APP. Set the SOS mobile phone number at the
SeTracker APP.
GETTING STARTED:
>>>Step One: Fully charge the smart watch. It will take 2-3
hours.
>>>Step Two: Insert a valid Nano SIM Card into the SIM card
slot. Do NOT try to insert a Micro SIM Card. The SIM need to
have the PIN CODE deactivated.
NOTE: When you are going to insert in a Nano SIM card, make
sure the smart watch is turned OFF. Or else it will need you to
restart the smart watch after the Nano SIM card has been
inserted in.

Make sure the Nano SIM card is,
***a valid Nano SIM card;
***must applied the Mobile Internet Data service, which is
provided by the Telecom provider;
***must applied the incoming phone call number displaying
service, which is provided by the Telecom provider.
How to insert the Nano SIM card into the SIM card slot?
1) Power OFF the smart watch
2) Second, there is a small screwdriver provided in the gift box,
use the small screwdriver to take off the screws from the shell of
SIM Card Slot.
3) Third, take off the shell, and then insert the Nano SIM card
into the SIM card slot. Follow below sketch.
You can hear a tiny sound once the Nano SIM card has been
inserted into the SIM card slot and into the right position.
To take the Nano SIM card out from the card slot, push it in
towards inside, to let the Nano SIM card bounce off the slot.

Do not throw away the White Elastic when you open the Card
slot shell. The smart watch won't be splashproof anymore, if
you throw away the white elastic.
This product communication is on 4G data system. The 4G
network must be available in your country.
>>>Step Three: Download and to install the SeTracker. (Do NOT
download the SeTracker2). If you have Android use Play Store
and if you have IOS system, use the APP STORE.
Install the SeTracker on your Android smart phone or iPhone.
Always tap OK/Yes/Confirm/Accept/Allow for any pop-up
requests.
NOTE: The APK/APP should be SeTracker. Do not mistake to use
SeTracker2.
>>>Step Four: At your smart phone, run the SeTracker, register
a new account and use the new account to log on the
SeTracker. Before you log in the SeTracker, the Area you must
select is Europe and Africa. It will be displayed on the Log on
interface of the SeTracker.
>>>Step Five: At SeTracker, on the Add Device interface  tap
the Scan icon which is on the right side of the screen.
Please scan or input the device ID’; at the same time, on the
Smart Watch, tap and slide to find the RegCode , scan this
Register Code to make the smart watch register to the
SeTracker APP. (The Register code also can be found on the
tag which hangs on the watchband). The device code will be
input automatically then. Input a nickname  select the
relationship to the user of the smartwatch  tap OK to finish
the registration of smart watch.
>>>Step Six: At SeTracker, tap the ME icon which is situated at
the bottom right side tap SOS Number  input maximum
three and the mobile phone numbers as the SOS number 

tap Save. After the SOS number(s) are saved, the SOS function
on the smartwatch will be activated. Long press the Power
Button for a few seconds the smart watch will call the 1st SOS
number, if nobody answer, it will automatically call the 2nd SOS
number, and if still nobody answer, it will automatically call the
3rd SOS number.
>>>Step Seven: At SeTracker, tap the HOME icon which is
situated at the bottom left side tap the Phone Call icon
which is on the upper part of the interface, and then input the
Call Number, this Call Number should be the mobile phone
number which its SIM Card has been inserted in the
smartwatch.
>>>Step Eight: At SeTracker, tap the HOME icon which is
situated at the bottom left side tap the Phonebook icon
which is on the upper part of the interface  tap Add to add a
new Contact one by one. You must input at least the name,
and the phone number. The system allow to add in more than
one contact. All the saved Contacts will be synced to the
smart watch’s Phonebook.
>>>Step Nine: At SeTracker, tap the ME icon which is situated
at the bottom right side select Fall Notification to set the
alarm for any sudden Fell Down incidents of the smart watch
user.
After above nine steps, the smart watch has been completely
registered.
Furthermore, there are more functions can be found at
SeTracker as following,
HOME ICON

Voice Chat - instant voice/text/emoji message chat in group
Phone Call
Phonebook
Eat Medicine Notification
Location data
Steps
Sleep monitor
Blood Pressure
Heart Rate
Health ICON
Walk
Turnover in Sleep
Heart rate/Blood pressure- Remote measure for these two
functions can be done to see the values
Blood Oxygen SPO2 can be read on the smartwatch
Map ICON
Device position
Smartphone position
Type of map display
Track history
Geofence (the safety zone and settings) – can set a virtual
safety zone at the map at SeTracker, when the user of the
smartwatch goes beyond this map safety zone area, the
smartphone will receive alerts.
ME ICON
SOS Number settings
Location Update Schedule
Find Device
Family Members
SMS Alerts
Alarm Clock
Fell Down Notification

Set Local Base Station
Remote Shutdown
Function Restrictions
Language – set the language to be displayed on the
smartwatch
Time Zone
Remote Camera
Night Power Saving
Receive Watch Text Messages
Reject Stranger Phone Call
Body Temperature Test
Video Call
Timer Switch
Device List – wearable devices which have been bind with this
smartphone
Change Password
Message
Restore Default Settings
Remote Restart
Remove Advertisements
Delete Account
Exit
PRODUCT FEATURES AND FUNCTIONS
POWER BUTTON
TOUCH RETURN BUTTON
TOUCH SCREEN. Capacitive touch screen 1.3"
BUILT IN SPEAKER
BUILD IN MICROPHONE
BUILD IN CAMERA AND ALBUM
BUILD IN FLASHLIGHT (TORCH)
BUILD IN GPS LOCATIONING
BUILD IN LBS LOCATIONING
BUILD IN 4G/3G/2G MODULE, SUPPORT MOBILE NETWORK

4G/3G/2G.
BUILD IN WIFI FUNCTION
SUPPORT PHONE CALL
SUPPORT VIDEO PHONE CALL
SUPPORT VOICE MESSAGE CHAT
BUILD IN PEDOMETER
BUILD IN HEART RATE MONITOR / BLOOD PRESSURE TEST
BUILD IN TEMPERUTURE TEST
ONE-KEY SOS – LONG PRESS THE POWER BUTTON TO MAKE A
SOS CALL
REAL-TIME LOCATION VIEW AT MAP AT SETRACKER
DISPLAY SCREEN OF THE SMART WATCH
Home interface – SIM Card signal status/ Battery/ Time/ Date/
Dial/ Voice Chat Time
Phone
Contact
Video Call
Voice Chat
Steps
Health test (Heart Rate, Blood Pressure and SPo2)
Temp – Body temperature test
Camera
Gallery (Album)
Sedentary –sedentary reminder
Settings – mobile networks, WIFI, Bluetooth, Volume setting,
Brightness setting, Flashlight, Sleep monitor,
Reboot(restart), Shutdown (Power OFF), Clear tools, Fall Down
notification setting, Device info (IMEI can be found in Device
info), Date & time settings,
Language setting.
RegCode – the Register Code. At SeTracker scan this code to
bind the smartwatch.
AppCode – use the smartwatch to scan this code to

download the SeTracker APP.
IMEI Code – find it at Settings  More  Device Info  IMEI
FALL DOWN FUNCTION:
Need to activate in settings and insert SOS number in the app.
If the watch detects a fall, automatic dialing to the numbers
registered in the app will be done starting for the 1st number
until the 3rd one if the calls are not attended.
TECHNICAL SPECIFICATIONS:
Display screen: Full touchscreen capacitive IPS touch screen
1.3".
Screen resolution: 240x240pixels.
Internal Memory: RAM 512MB, ROM 4GB
System: Nucleus
CPU: SP9820E
Camera: 0.3MP
Locationing: GPS Locationing + LBS Locationing + WIFI
Locationing
MOBILE Network: 4G, 3G, 2G
4G FDD band: 2100, 2200, 1900, 1800, 850, 2600, 900, 800.
3G WCDMA band: 2100, 1900, 850, 900.
2G GSM band: 1900, 1800, 850, 900.
SIM Card Slot: support Nano SIM card
Charge I/O port : USB magnetic charging cable
Battery: Built in Li-Polymer 680mAh
Stand by time: 2~3 DAYS
Working time: 1~2 DAYS
Water-resist Rating: IP67 (this device resists raindrops, it’s not
water proof)
Weight: TBA
Declaration of Conformity
Hereby we,
Name of manufacturer: SANTOSHI SL
Address: CALLE FELIPE ASENJO N.56

Zip code & City: 28947 - FUENLABRADA ( MADRID )
Country: SPAIN
declare that this DoC is issued under our sole responsibility and that this product:
Product description: SMARTWATCH
Type designation(s): WS-2352
Trademark: SAMI WEARABLE
is in conformity with the relevant Union harmonization legislation:
DIRECTIVE EMC 2014/30/EU
DIRECTIVE LVD 2014/35/EU
Standard CE (RED): DIRECTIVE 2014/53/EU
Standard RoHS: 2011/65/EU: (RoHS) Restriction of Hazardous Substance.
Amendment RoHS: Directive (EU)2015/863
Battery Directive: 2006/66/EC and amendment 2013/56/EU.
with reference to the following standards applied:
Health & Safety EN 50566:2017
EN 62209-2:2010
EN 62479:2010
EN 60950-1:2006 + A11:2009 + A1:2010+A12:2011+A2:2013
Electromagnetic Compatibility
Draft EN 301 489-1 V2.2.1
EN 301 489-19 V2.1.1
Draft EN 301 489-52 V1.1.0
EN 55032:2015
EN 55035:2017
EN 61000-3-2:2014
EN 61000-3-3:2013
Effective Use of Spectrum EN 301 511 V12.5.1
EN 303 413 V1.1.1
Signature
Full name: VISHAL MIRPURI
Position: ADMINISTRATOR
Date: 01 / 10 / 2020