Sami WS-2304 User manual

WEARABLE
User Manual
WS-2304
Thank you for purchasing the Sami WEARABLE WS-2304. Read the instructions carefully to obtain optimum results and preserve it for
future reference.
Compatibility
Compatible with Android/iPhone.
*Compatible with android versions up to 5.1.With future versions support is not guaranteed.
Function Icon.
MAIN FEATURES:
1. Time and date function
2. Sensor G
3. This wearable can be paired to your smart phone by Bluetooth. The version of the Bluetooth is V 4.0.
4. The wearable can be used only in vibration mode.
5. Identification of incoming calls (vibrate and name of contact).
6. Message alert (vibrate and name of contact).
7. Permits you to check Whatsapp or any PUSH messages (vibrate and name of contact).
8. Facebook notifications (vibrate mode).
9. Built in alarm clock.
10. Pedometer (steps, calories, distance).
Quick Start Guide
1.Charge:
Please charge the bracelet for 30minutes before using. Pull out the host as below picture. Insert the host to a 5V/1A USB port for
charging. The red indicating light stops flashing when it is full charged after 30 minutes.
* Note: The guarantee does not cover incorrect mounting and dismounting of the wearable.

2.Install APP:
Go to App store or Google play store, download APP: “Zeroner” and install it. To use Zeroner APP, make sure your mobile device
connected with internet via Mobile network or WiFi.
3.Account set-up:
Run the “Zeroner” App. Log in if you have an e-mail account, or register a new account. You will be required to enter your password
as well to initiate the session.
4.Bracelet Operating Instructions:
You can use the bracelet by “gesture control” (this function can be activated from the "device setting" options of the main menu) or
“touching” the screen.
Gesture control:
It is convenient to check the time by “wrist gesture”.
Keep the bracelet screen horizontal
Then turn wrist over
The bracelet will be turned on
automatically, then time shows up.
“Touching”
*Note: Function may be changed and upgraded according to the bracelet hardware update. For further information, please refer to
Function
Operation
Turn on
Long press the bracelet screen
Light up the
screen
Click the screen or turn the wrist over
Turn off
Slip left and right to the interface , then switch to , then long press the screen to turn off
the device
Switch function
Slip left and right
Page turning
Click the screen
Confirm
Long press the screen

“Help” option on APP.
5.Pairing:
Keep your phone with Bluetooth and WIFI “on” for this step.
1). Log in the App Zeroner, show the main
page. Tap the top left corner button or slip
the screen from left to right, and
click【Device Connection】
2).Double press the bracelet touch screen ,the
radar icon “ ”shows up on the bracelet,Tap
the button【Searching device】on APP,select
your right ID from the device list, and wait for 1-
2 seconds
*Note: It is important to connect the
wearable to the smart phone from "Device
connection" option of the above screen.
3).Android device will pop up. Device pair
request, choose “confirm”, and finish
pairing.
4).IOS device will pop up. Pair Device
Success,Bluetooth Pairing Request,click
”pair”, and finish paring.
If the pairing pop-up do not appear within 1 minute, repeat the above steps.
6.SYNC Data
The bracelet SYNC data automatically after connected with phone by APP(Zeroner), the bracelet time will be calibrated same as the
time of phone. SYNC data includes: steps, calorie, distance. You can check if the data SYNC is completed successfully on the APP. It

will take 1-2 minutes to SYNC data for first time. SYNC data can be done manually by clicking the refresh button on APP too.
7.Sleep monitor
Start Sleep Mode：the bracelet will distinguish if the wearer is sleep or awake every day time 20:00 to 09:00, if the wearer sleep, then
the bracelet will start sleep monitor mode automatically, the icon show up.
Exit sleep mode：when the wearer awake and move around 1 minute, the bracelet exit sleep monitor mode automatically, the
bracelet will exit sleep mode and back to time display.
8.Reset the bracelet
Slip left and right to the interface , then switch to , then long press the screen to turn off the device.
9.For more functions, please download APP “Zeroner” to use.
FAQ
1. Q:When connected with App, the data SYNC is finished but the bracelet time display is still incorrect。
A: Reset the bracelet and try data SYNC again
Q: After the bracelet connected with APP, why the bracelet didn’t show call ID when the call coming?
A: Android Phone: After connected with bracelet with APP, please allow “zeroner” to visit calls, SMS, contacts and keep
“Zeroner” running in background. If there are security software on your phone, set the software “zeroner” as “trust”.
IOS: If your phone is iPhone, please restart your phone and connect the bracelet again. When connect please wait until the phone
pop up “Bluetooth pairing request” and click “pair”, the call ID display function comes.
2. Q:The bracelet icon shows the Bluetooth was connected, but the APP cannot SYNC data?
A:Generally it is caused by the Bluetooth of the phone. Please switch off the APP firstly , restart the Bluetooth and repair. If the above
step does not work, please restart your phone and try again.
3. Q:Why my bracelet lose connection with my phone frequently?
A:Please check if your phone or other security software sets “Zeroner” as trusted APP or not. if not, please set it as trusted and try again.
TECHNICAL SPECIFICATIONS:
Display screen: Capacitive touch screen 0.91".
Screen resolution: 128x64 pixels.
Charge I/O port: Micro USB 5 pin.
Battery: Built in Li-Polymer 75 mAh
Bluetooth version : 4.0