Samsung AQB09JJWC User manual

For more information, Please access to our service web site(http://itself.sec.samsung.co.kr)
AIR CONDITIONER THE FEATURE OF PRODUCT
SPLIT-TYPE AIR CONDITIONER
Basic : SH12BWHA
Model : AQB09JJWC/AQB12JJWC
Model Code : AQB09JJWC/AQB12JJWC
UQB09JJWC/UQB12JJWC
■ Energy Saving Function
■ High Impressive & Elegant Design
■ Silver Nano Pre-Filter
■ Multi Functional Cleaning System
■ : The Chatechin filter and activated Deodorizing filter
are adopted.
■ Human Touch Remote control
AQB09JJWC/AQB12JJWC
UQB09JJWC/UQB12JJWC
26006A(2)_co.indd 1 2006-04-14 ｿﾀﾈﾄ 5:11:24

Operating Instructions and Installation
Samsung Electronics 1
Contents
11. Precautions ................................................................................................................................................ 1-1
1-1 Installing the air conditioner .................................................................................................................. 1-1
1-2 Power supply and circuit breaker .......................................................................................................... 1-1
1-3 During operation ...................................................................................................................................... 1-1
1-4 Disposing of the unit ............................................................................................................................... 1-2
1-5 Others ......................................................................................................................................................... 1-2
12. Product Specifications ....................................................................................................................... 2-1
2-1 The Feature of Product ............................................................................................................................ 2-1
2-2 Product Specifications ............................................................................................................................. 2-2
2-3 The Comparative Specifications of Product ........................................................................................ 2-3
2-4 Accessory and Option Specifications ................................................................................................... 2-4
13. Alignment and Adjustments ......................................................................................................... 3-1
3-1 Indoor Display Error and Check Method ............................................................................................. 3-1
3-2 Outdoor LED Error Display and Check Method .................................................................................. 3-5
3-3 Setting Option Setup Method ............................................................................................................... 3-6
14. Disassembly and Reassembly ...................................................................................................... 4-1
4-1 Indoor Unit ................................................................................................................................................. 4-1
4-2 Outdoor Unit ............................................................................................................................................ 4-4
15. Exploded Views and Parts List ..................................................................................................... 5-1
5-1 Indoor Unit ................................................................................................................................................. 5-1
5-2 Outdoor Unit ............................................................................................................................................. 5-3
5-3 Ass’y Control In ......................................................................................................................................... 5-7
5-4 Ass’y Control Out ...................................................................................................................................... 5-9
16. Electrical Parts List ............................................................................................................................... 6-1
17. Wiring Diagram ...................................................................................................................................... 7-1
7-1 Indoor Unit ................................................................................................................................................. 7-1
7-2 Outdoor Unit ............................................................................................................................................ 7-2
26006A(2)_1.indd 1 2006-04-14 ｿﾀﾈﾄ 5:12:25

Contents
18. Schematic Diagram .............................................................................................................................. 8-1
8-1 Indoor Unit ................................................................................................................................................. 8-1
8-2 Outdoor Unit ............................................................................................................................................ 8-2
19. Circuit Descriptions .............................................................................................................................. 9-1
9-1 PCB Circuit Descriptions .......................................................................................................................... 9-1
9-2 Refrigerating Cycle Diagram
.................................................................................................................. 9-3
10. PCB Diagram ............................................................................................................................................. 10-1
10-1 Indoor PCB ............................................................................................................................................... 10-1
10-2 Outdoor Inverter PCB ............................................................................................................................ 10-2
10-3 Outdoor Main PCB ................................................................................................................................. 10-3
11. Operating Instructions ...................................................................................................................... 11-1
11-1 Name of Each Part .................................................................................................................................. 11-1
11-2 Main Function ......................................................................................................................................... 11-3
11-3 Wireless Remote Control-Buttons and Display ................................................................................. 11-5
12. Troubleshooting .................................................................................................................................... 12-1
12-1 Items to be checked first ...................................................................................................................... 12-1
12-2 Fault Diagnosis by Symptom ............................................................................................................... 12-2
12-3 PCB Inspection Method ........................................................................................................................ 12-20
12-4 Main Part Inspection Method .............................................................................................................. 12-22
13. Block Diagram ......................................................................................................................................... 13-1
13-1 Indoor Unit .............................................................................................................................................. 13-1
13-2 Outdoor Unit ........................................................................................................................................... 13-3
14. Reference Sheet ...................................................................................................................................... 14-1
14-1 Index for Model Name .......................................................................................................................... 14-1
14-2 Pressure Graph ........................................................................................................................................ 14-2
14-3 Pressure & Capacity mark ..................................................................................................................... 14-2
14-4 Q & A for Non-trouble ........................................................................................................................... 14-3
14-5 Cleaning/Filter Change ......................................................................................................................... 14-6
14-6 Installation ............................................................................................................................................... 14-8
14-7 Installation Diagram of Indoor Unit and Outdoor Unit .................................................................. 14-9
26006A(2)_1.indd 2 2006-04-17 ｿﾀﾈﾄ 2:52:45

Samsung Electronics 1-1
1. Precautions
1-1 Installing the air conditioner
● Users should not install the air conditioner by themselves.
Ask the dealer or authorized company to install the air conditioner except the window-type air conditioner in U.S.A and Canada.
● If you don’t install the air conditioner properly, it may cause a fire, a water leakage or an electric shock.
● You must install the air conditioner according to the national wiring regulations and safety regulations.
● Install the indoor unit higher than 2.5m from the floor to avoid the injury caused by the operation of the fan.
(except the window-type air conditioner)
● The manufacturer is not responsible for any accidents or injury caused by an incorrect installation.
● When installing the built-in type air conditioner, keep all electric cables such as the power cable and the connection cord in pipes,
ducts, or cable channels to protect them from the danger of impact or any other incidents.
1-2 Power supply and circuit breaker
● If the power cord of the air conditioner is damaged, it must be replaced by the manufacturer or a qualified person in order to avoid a
hazard.
● The air conditioner must be plugged into an independent circuit if applicable or connect the power cable to the auxiliary circuit
breaker.
An all pole disconnection from the power supply must be incorporated in the fixed wiring with a contact opening of >3mm.
● Do not extend an electric cord to the air conditioner.
● The air conditioner must be plugged in after you complete the installation.
1-3 During operation
● Do not repair the air conditioner at your discretion.
It is recommended to contact a service center directly.
● Never spill any kind of liquid on the air conditioner.
If this happens, turn off the air conditioner and contact an authorized service center.
● Do not insert anything between the airflow blades to prevent damage of the inner fan and consequent injury.
Keep children away from the air conditioner.
● Do not place any obstacles in front of the air conditioner.
● Do not spray any kind of liquid into the indoor unit. If this happens, turn off the air conditioner and contact a service center.
● Make sure that the air conditioner is well ventilated at all times:
Do not place a cloth or other materials over it.
● Remove the batteries if you don’t use the remote control for a long time. (If applicable)
● Use the remote control within 7 meters from the indoor unit. (If applicable)
26006A(2)_1.indd 1 2006-04-14 ｿﾀﾈﾄ 5:12:26

1-2 Samsung Electronics
1-4 Disposing of the unit
● Before throwing out the air conditioner, remove the batteries from the remote control.
● When you dispose of the air conditioner, consult your dealer. If pipes are removed incorrectly, refrigerant may blow out and cause air
pollution. When it contacts with your skin, it can cause skin injury.
● The package of the air conditioner should be recycled or disposed of properly for environmental reasons.
1-5 Others
● Never store or load the air conditioner upside down or sideways to prevent the damage to the compressor.
● Young children or infirm persons should be always supervised when they use the air conditioner.
● Max current is measured according to IEC standard for safety.
● Current is measured according to ISO standard for energy efficiency.
26006A(2)_1.indd 2 2006-04-14 ｿﾀﾈﾄ 5:12:26

Samsung Electronics 2-1
2. Product Specifications
2-1 The Feature of Product
■ Energy saving function
Makes a room cool with and energy saving and arises the efficiency of air conditioner.
■ High impressive & elegant design
With a Smart and fashionable style, the high impressive interior design allow this product to set place in anywhere.
■ Silver Nano Pre-Filter
■ Multi functional cleaning system
Multi Chatechin filter and activated Deordorizing filter are adopted.
■ Human touch remote control
The use of air conditioner is easier and more convenient by the human touch remote control of new design.
26006A(2)_1.indd 1 2006-04-14 ｿﾀﾈﾄ 5:12:26

2-2 Samsung Electronics
2-2 Product Specifications
AQB09JJWC AQB12JJWC
Indoor unit Outdoor unit Indoor unit Outdoor unit
Performance
Type Wall-mounted Wall-mounted
Cooling(Min/Std/Max) Btu/hr 3,100/9,000/11,900 3,100/12,000/14,300
Heating(Min/Std/Max) Btu/hr 3,100/12,000/17,000 3,100/13,600/18,700
Dehumidifying 1.5 2
Air Volume Cooling m³/min
(H/M/L)
4.5/6.0/7.5 31.5/22/13.0 4.5/6.5/8.0 31.5/22/13.0
Heating 5.5/7.0/8.5 31.5/22/13.0 5.5/7.5/9 31.5/22/13.0
Noise Cooling dB 41/28 51 43/28 53
Heating 41/28 51 43/28 53
Energy Efficiency Ratio Cooling Btu/hr 13.85 11.43
Heating 12.63 12.04
Power ph-V-Hz 1-208/230-60 1-208/230-60
Power
Power Consumption Cooling W230/650/1,030 230/1,050/1,450
Heating 220/950/1,450 220/1,130/1,750
Operating Current
(Min/Std/Max)
Cooling A1.5/3.0/5.0 1.5/4.9/6.9
Heating 1.35/4.4/6.5 1.35/5.3/7.5
Power Factor Cooling %91 92.5
Heating 92 92.5
Size
Outer Dimension WidthxHeightxDepth mm 825x285x189 790x548x285 825x285x189 790x548x285
inch 32.5x11.2x7.4 31.1x21.6x11.2 32.5x11.2x7.4 31.1x21.6x11.2
Weight(Net) lb 17 78 17 78
Drain Hose DxL(inch) ø1.06"x21.7 ø1.06"x21.7
Compressor
Type Rotary, G4C090LU2ER Rotary, G4C090LU2ER
Motor Type Hermetic Hermetic
Rated Output W 853 853
Oil Type FREOLα68ES-T FREOLα68ES-T
Blower
Type Cross-flow Propeller Cross-flow Propeller
Motor Type Resin/steel Resin/steel Resin/steel Resin/steel
Rated Output W 27 50 27 50
Piping
Refrigerant Pipe Liquid D(inch)xL(ft) ø1/4"(6.35mm)x24.6(7.5m) ø1/4"(6.35mm)x24.6(7.5m)
Gas D(inch)xL(ft) ø3/8"(9.52mm)x24.6(7.5m) ø3/8"(9.52mm)x24.6(7.5m)
Connection Method Flare
Between Height ft Max.26.2(8m)
Pipe Length ft Max.49.2(15m)
Heat Exchanger 2ROW 14STEP 2ROW 14STEP
Refrigerant Control Unit Electric Expansion Valve Electric Expansion Valve
Freezer Oil Capacity gal 0.084 0.084
Refrigerant to Change(R410A) lb 2.2 2.2
Protection Device(OLP) None None
Cooling Test Condition Indoor Unit : DB80˚F WB66˚F Outdoor Unit : DB95˚F WB75˚F
Heating Test Condition Indoor Unit : DB68˚F WB59˚F Outdoor Unit : DB44.6˚F WB42.8˚F
Item
Model
26006A(2)_1.indd 2 2006-04-14 ｿﾀﾈﾄ 5:12:26

Samsung Electronics 2-3
2-3 The Comparative Specifications of Product
Item AQB12JJWC SH12BWHA (Basic)
Design
Indoor Unit
Outdoor Unit
Net Weight Indoor Unit 17 lb 17 lb
Outdoor Unit 78 lb 79 lb
Outer Dimension
(WidthxHeightxDepth)
Indoor Unit 32.5x11.2x7.4 inch 32.5x11.2x7.4 inch
Outdoor Unit 31.1x21.6x11.2 inch 28.4x21.6x10.4 inch
Noise Indoor Unit 43dB↓43dB↓
Outdoor Unit 53dB↓53dB↓
26006A(2)_1.indd 3 2006-04-14 ｿﾀﾈﾄ 5:12:27

2-4 Samsung Electronics
2-4 Accessory and Option Specifications
2-4-1 Accessories
Item Descriptions Code-No. Q'TY Remark
Installation Plate DB70-00406A 1
Indoor
Unit
Remote Control DB93-03012K 1
Batteries for Remote Control DB47-90024A 2
User’s Manual DB98-25865A 1
Installation Manual DB98-25853A 1
Service Manual DB98-26006A 1
Drain Plug DB67-20011A 1
Outdoor
Unit
Rubber Leg DB73-00179A 4
3-wire Power Cable - 1
Accessory
Box
2-wire Assembly Cable - 1
OWNER'SINSTRUCTIONS
MANUALDEINSTRUCCIONES
ISTRUZIONIPERL'USO
MANUALDEINSTRU‚ÍES
MANUELD'UTILISATION
GEBRAUCHSANWEISUNG
Splut-typeRoomAirConditioner
AireacondicionadodomŽsticosistemaSplit
Condizionatored'ariaperambientiadunitˆSeparate
AparelhodearcondicionadotipoSplit
ClimatiseurdetypesŽparŽ
Geteilteraumklimaanlage
OWNER'SINSTRUCTIONS
MANUALDEINSTRUCCIONES
ISTRUZIONIPERL'USO
MANUALDEINSTRU‚ÍES
MANUELD'UTILISATION
GEBRAUCHSANWEISUNG
Splut-typeRoomAirConditioner
AireacondicionadodomŽsticosistemaSplit
Condizionatored'ariaperambientiadunitˆSeparate
AparelhodearcondicionadotipoSplit
ClimatiseurdetypesŽparŽ
Geteilteraumklimaanlage
26006A(2)_1.indd 4 2006-04-14 ｿﾀﾈﾄ 5:12:29

Samsung Electronics 2-5
Accessories(cont.)
Item Descriptions Code-No. Q'TY Remark
3-wire Assembly Cable - 1
Accessory
Box
Assembly Pipe, ø1/4 inch(6.35mm) DB96-10453B 1
Assembly Pipe,ø3/8 inch(9.52mm) DB96-10453F 1
PE T3 Foam Tube Insulation DB72-50165A 1
Vinyl Tape, Width 2 inch(50mm) DB72-00459A 1
Drain Plug DB67-20011A 1
Rubber Leg DB73-00179A 4
Pipe Clamps A DB39-20224A 3
Pipe Clamps B DB39-20224B 3
Cement Nail - 6
Product Specifications
26006A(2)_1.indd 5 2006-04-14 ｿﾀﾈﾄ 5:12:30

2-6 Samsung Electronics
Accessories(cont.)
Item Descriptions Code-No. Q'TY Remark
M4x16 Tapping Screws 6002-000215 10
Accessory
Box
Drain Hose, length 78.7 inch(2m) DB62-00487A 1
Putty 3.28oz(100g) DB98-10568A 1
Product Specifications
26006A(2)_1.indd 6 2006-04-14 ｿﾀﾈﾄ 5:12:30

Samsung Electronics 3-1
3. Alignment and Adjustments
3-1 Indoor Display Error and Check Method
● : Lamp on, : Lamp off, ◑ : Lamp blink
Description
LAMP
Main Checking Point
OPERATION TIMER TURBO
Indoor unit room temperature sensor error
(open or short)
◑
3-2P
Indoor unit heat exchanger temperature sensor error
(open or short)
◑ ◑
3-3P
Indoor fan motor malfunction
◑
3-4P
EEPROM error
◑ ◑ ◑
Option Setting
Option error
(option wasn’t set up or option data error)
◑ ◑ ◑
Option Setting
Outdoor unit error
◑ ◑
Remote Control on/off
Outdoor Unit Power Reset
26006A(2)_1.indd 1 2006-04-14 ｿﾀﾈﾄ 5:12:30

3-2 Samsung Electronics
Description
LAMP
OPERATION TIMER TURBO
Indoor unit room temperature sensor error
(open or short)
◑
● : Lamp on, : Lamp off, ◑ : Lamp blink
3-1-1 Indoor Unit Room Temperature Sensor Error
Yes
No
No
Detach the assembly sensor from the
ASS'Y PCB CN43 connector and measure
the sensor resistance with an ohmmeter(tester)
between Pin #1 and #2.
Connect the sensor to CN43,
supply power, and measure the voltage of
#1 and #2 of the CN43 connector.
MICOM Error or Connector(CN43) check
No
ASS'Y Sensor Replace
SENSOR Resistance Value : 68˚F-12.09KΩ
86˚F-8.31KΩ
95˚F-6.94KΩ
104˚F-5.83KΩ
Is the sensor resistance value
10KΩ ±3% at the room temperature
of 77˚F?
Yes Poor ASS'Y PCB Replace
Below 0.5V?
Yes Poor ASS'Y PCB Replace
Over 4.9V?
Alignment and Adjustments
26006A(2)_1.indd 2 2006-04-14 ｿﾀﾈﾄ 5:12:31

Samsung Electronics 3-3
Description
LAMP
OPERATION TIMER TURBO
Indoor unit heat exchanger temperature sensor error
(open or short)
◑ ◑
● : Lamp on, : Lamp off, ◑ : Lamp blink
3-1-2 Indoor Unit Heat Exchanger Temperature Sensor Error
1. Check the assembly condition of the sensor connector(CN43) on the indoor unit Main PCB and if not assembled, reassemble the
connector accurately.
2. Detach the room pipe sensor connector(CN43) and check the resistance between Pin #3 and #4.
If the above data is not met, replace the room pipe sensor.
3. Assemble the room pipe sensor to PCB, plug in, and check the voltage of connector 3 and 4. If the resistance is below 0.5V or over 4.9V,
replace the indoor Main PCB. (short or disconnected in the PCB board)
Temperature(˚F) Resistance Value(Kohm) Temperature(˚F) Resistance Value(Kohm) Others
59 14.68 86 8.31
he data tolerance
is ±3%.
68 12.09 95 6.94
77 10 104 5.83
Alignment and Adjustments
26006A(2)_1.indd 3 2006-04-14 ｿﾀﾈﾄ 5:12:31

3-4 Samsung Electronics
After unplugging out the power cord should
be reconnected within 5 seconds.
Does the OPERATION lamp blink?
Does the Solid State Relay(SS71) work properly?
Is the supply voltage of the fan motor sufficient?
Test rod location
PCB CN72 Condition
About AC180V
Normal
voltage
pin #3 and #5 Fan operating
Yes
Yes
Yes
Yes
No
No
No Check as in the procedure "No power".
PCB is
out of order. PCB should be replaced.
Replace Motor
Fan-Capacitor
Fan motor should be replaced.
Fan motor is out of order.
Motor Fan-Capacitor is out of order
Test rod location
+ -
SS71-SS71- 12V
Normal
voltage
Micom is
out of order. Micom should be replaced
Description
LAMP
OPERATION TIMER TURBO
Indoor unit fan motor malfunction
◑
● : Lamp on, : Lamp off, ◑ : Lamp blink
3-1-3 Indoor Unit Fan Motor Malfunction
1. Checklist:
1) Is the indoor unit fan motor properly connected with the connector (CN72)?
2) Is the AC voltage correct?
3) Is HALL IC in indoor fan motor properly connected with the connector (CN44)?
4) Is the running capacitor (CR71) properly connected with PCB board?
2. Troubleshooting procedure
Alignment and Adjustments
26006A(2)_1.indd 4 2006-04-14 ｿﾀﾈﾄ 5:12:32

Operating Instructions and Installation
Samsung Electronics 3-5
3-2 Outdoor LED Error Display and Check Method
No.
LED Display
Explanation Main Checking Point
Yellow Green Red
1○○○Power off/ VDD NG • Fuse power source
2○ ○ ◎ IPM Over Current(O.C)
• Input voltage range
• Installation condition
• Outdoor fan motor
3
○○●
Abnormal Serial communication • Communication wiring
• Installation condition
○●●
4○ ◎ ○ Compressor Starting error
• Compressor wire
• Compressor terminal
• Outdoor controller
5○ ◎ ● Normal Operation • Operating mode
6○●○Compressor Lock error • Compressor wire
• Compressor terminal
7○ ● ◎ DC-Link voltage under/over error • Input voltage range
• DC voltage sensor
8◎ ○ ◎ Outdoor temperature sensor error(Dual/Single) • PCB pattern & sensor(Open/Short)
9◎ ○ ● Discharge over temperature(Dual/Single) • PCB pattern & sensor(Open/Short)
10 ◎ ◎ ○ Discharge temperature sensor error(Dual/Single) • PCB pattern & sensor(Open/Short)
11 ◎ ◎ ● Current sensor error • PCB pattern & sensor(Open/Short)
12 ◎ ● ○ Compressor Limit error • EEV
• Gas over charge
13 ◎ ● ◎ Coil temperature sensor error(Dual/Single) • PCB pattern & sensor(Open/Short)
14 ◎ ● ● 1min. Time out Communication • Communication wiring
• PCB pattern(Open/Short)
15 ●○○Fan error • Fan motor
• Connector(CN40 or CN71)
16 ● ○ ◎ OTP error • PCB pattern & part(Open/Short)
17 ●○●Compressor rotation error • Compressor wire
• Compressor terminal
18 ● ◎ ○ Operation condition secession(Dual only) • Installation condition
• Abient temperature
19 ● ◎ ◎ DC-Link voltage sensor error • PCB pattern & sensor(Open/Short)
20 ● ◎ ● I_Trip error / PFC Over current • Input voltage range
• PCBpattern & part(Open/Short)
21 ●●○GAS Leak error(Dual/Single) • Piping condition
22 ● ● ◎ AC Line Zero Cross Signal out • Terminal block
• AC zero-crossing circuit block
23 ●●●Power ON reset(1sec) • PCB pattern (Open/Short)
24 ◎ ○ ○ Capacity miss match • Option code
25 ○ ◎ ◎ Test Operation at Cooling Mode • Operating mode
26 ◎ ◎ ◎ Test Operation at Heating Mode • Operating mode
● : LED ON, ○ : LED OFF, ◎ : LED BLINK
26006A(2)_1.indd 5 2006-04-14 ｿﾀﾈﾄ 5:12:32

Samsung Electronics
3-3 Setting Option Setup Method
ex) Option No. :
Step 1 : Enter the Option Setup mode.
1st Take out the batteries of remote control.
2nd Press the temperature button simultaneously and
insert the battery again.
3rd Make sure the remocon display shown as .
Step 2 : Enter the Option Setup mode and select your option according to the following procedure.
Feature Display
Setting Option SEG1.
Push the button to set the display panel to .
Every time you push the button, the display panel reads ➡ ➡
➡ ➡ . . . ➡ ➡ ➡ ➡ ➡ ➡ repeatedly.
Setting Option SEG2.
Push the button to set the display panel to .
Every time you push the button, the display panel reads ➡ ➡
➡ ➡ . . . ➡ ➡ ➡ ➡ ➡ ➡ repeatedly.
Change it into the set display of Option SEG3 and SEG4
with the button.
Setting Option SEG3.
Push the button to set the display panel to .
Every time you push the button, the display panel reads ➡ ➡
➡ ➡ . . . ➡ ➡ ➡ ➡ ➡ ➡ repeatedly.
Setting Option SEG4.
Push the button to set the display panel to .
Every time you push the button, the display panel reads ➡ ➡
➡ ➡ . . . ➡ ➡ ➡ ➡ ➡ ➡ repeatedly.
1
2
3
4
5
6,9
7,10 8,11
3
1,4 2,5
12
13 14
3-6
26006A(2)_1.indd 6 2006-04-14 ｿﾀﾈﾄ 5:12:37

Operating Instructions and Installation
Samsung Electronics 3-7
Feature Display
Change it into the set display of Option SEG5 and SEG6
with the button.
Setting Option SEG5.
Push the button to set the display panel to .
Every time you push the button, the display panel reads ➡ ➡
➡ ➡ . . . ➡ ➡ ➡ ➡ ➡ ➡ repeatedly.
Setting Option SEG6.
Push the button to set the display panel to .
Every time you push the button, the display panel reads ➡ ➡
➡ ➡ . . . ➡ ➡ ➡ ➡ ➡ ➡ repeatedly.
Change it into the set display of Option SEG7 and SEG8
with the button.
Setting Option SEG7.
Push the button to set the display panel to .
Every time you push the button, the display panel reads ➡ ➡
➡ ➡ . . . ➡ ➡ ➡ ➡ ➡ ➡ repeatedly.
Setting Option SEG8.
Push the button to set the display panel to .
Every time you push the button, the display panel reads ➡ ➡
➡ ➡ . . . ➡ ➡ ➡ ➡ ➡ ➡ repeatedly.
Change it into the set display of Option SEG9 and SEG10
with the button.
Setting Option SEG9.
Push the button to set the display panel to .
Every time you push the button, the display panel reads ➡ ➡
➡ ➡ . . . ➡ ➡ ➡ ➡ ➡ ➡ repeatedly.
Setting Option SEG10.
Push the button to set the display panel to .
Every time you push the button, the display panel reads ➡ ➡
➡ ➡ . . . ➡ ➡ ➡ ➡ ➡ ➡ repeatedly.
6
7
8
9
10
11
12
13
14
6,9
7,10 8,11
3
1,4 2,5
12
13 14
Alignment and Adjustments
26006A(2)_1.indd 7 2006-04-14 ｿﾀﾈﾄ 5:12:47

Operating Instructions and Installation
Samsung Electronics
Step 3 : Upon completion of the selection, check you made right selections.
Whenever you press the
button, the set Option will be displayed.
Step 4 : Pressing the ON/OFF button ( )
When pressing the operation ON/OFF key with the direction of remote control for unit, the sound "Ding" is heard and the
OPERATION LED lamp is flickering at the same time, then the input of option is completed. (If the "ding" sound isn't heard, try again
pressing the ON/OFF button.)
Step 5 : Unit operation test-run
First, Remove the battery from the remote control.
Second, Re-insert the battery into the remote control.
Third, Press ON/OFF (
) key with the direction of remote control for set.
• Error Mode
1st If all lamps of indoor unit are flickering, Plug out, plug in power plug again and press ON/OFF key to retry.
2nd If the unit is not working properly or all lamps are continuously flickering after setting the option code, see if the
correct option code is set up for its model.
Alignment and Adjustments
3-8
26006A(2)_1.indd 8 2006-04-14 ｿﾀﾈﾄ 5:12:52

Operating Instructions and Installation
Samsung Electronics 3-9
■OPTION ITEMS
SEG1 SEG2 SEG3 SEG4 SEG5 SEG6 SEG7 SEG8 SEG9 SEG10
AQB09JJWC 8 c 7 7 7 7 5 2 4 9
AQB12JJWC 9 c 7 7 7 7 5 2 5 9
MODEL
REMOCON
Alignment and Adjustments
26006A(2)_1.indd 9 2006-04-14 ｿﾀﾈﾄ 5:12:53