Samsung S3C2450 User manual

S3C2450/ Mobile Solution/ IM-1.0-06-01
Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. i
Public
Installation Manual for S3C2450
(Windows CE 5.0)

S3C2450/ Mobile Solution/ IM-1.0-06-01
Property of Samsung Electronics Co., Ltd. Mobile Solution Group,
System LSI.
Public
ii
Installation Manual for S3C2450 (Windows CE 5.0)
Copyright © 2004 Samsung Electronics Co, Ltd. All Rights Reserved.
Though every care has been taken to ensure the accuracy of this document, Samsung Electronics Co,
Ltd. cannot accept responsibility for any errors or omissions or for any loss occasioned to any person,
whether legal or natural, from acting, or refraining from action, as a result of the information
contained herein. Information in this document is subject to change at any time without obligation to
notify any person of such changes.
Samsung Electronics Co, Ltd. may have patents or patent pending applications, trademarks copyrights
or other intellectual property rights covering subject matter in this document. The furnishing of this
document does not give the recipient or reader any license to these patents, trademarks copyrights or
other intellectual property rights.
No part of this document may be communicated, distributed, reproduced or transmitted in any form or
by any means, electronic or mechanical or otherwise, for any purpose, without the prior written
permission of Samsung Electronics Co, Ltd.
The document is subject to revision without further notice.
All brand names and product names mentioned in this document are trademarks or registered
trademarks of their respective owners.
Contact Address
Samsung Electronics Co., Ltd.
San #24 Nongseo-Ri, Giheung-EUP,
Yongin- City, Gyeonggi-Do, Korea
C.P.O Box #37, Suwon 449-900
Home Page: http://www.samsungsemi.com

S3C2450/ Mobile Solution/ IM-1.0-06-01
Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. iii
Public
Revision History
Date Version Author Amendment
2008.03.31 1.0 WINCE Team Preliminary draft
2008.05.02 1.1 WINCE Team

S3C2450/ Mobile Solution/ IM-1.0-06-01
Property of Samsung Electronics Co., Ltd. Mobile Solution Group,
System LSI.
Public
iv
Contents
1 OVERVIEW.........................................................................................................................................................1
2 COPYING BSP AND SETTING UP PLATFORM BUILDER.......................................................................2
3 CREATING A NEW PLATFORM....................................................................................................................8
4 BUILDING OS IMAGE – WITHOUT KITL.................................................................................................17
4.1 BUILDING NK.NB0(SINGLE.BIN)IMAGE ......................................................................................................17
4.2 BUILDING CHAIN.LST(MULTIPLE XIP) IMAGE.............................................................................................30
5 SINGLE.BIN IMAGE.......................................................................................................................................32
5.1 RUNNING NK.NB0IMAGE.............................................................................................................................32
5.2 FUSING WINDOWS CE IMAGE ON SMC VIA USB (USING UBOOT) .............................................................39
5.3 BUILDING AND RUNNING SINGLE.BIN OS IMAGE –WITH KITL...................................................................56
5.4 USB SERIAL KITL.......................................................................................................................................59
6 MULITPPLE XIP IMAGE...............................................................................................................................66
6.1 RUNNING CHAIN.LST IMAGE.........................................................................................................................66
6.2 FUSING WINDOWS CE IMAGE ON SMC VIA USB (USING UBOOT) .............................................................66
6.3 BUILDING AND RUNNING MUTILPLEXIP OS IMAGE –WITH KITL ..............................................................85
6.4 USB SERIAL KITL.......................................................................................................................................88

S3C2450/ Mobile Solution/ IM-1.0-06-01
Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. v
Public
Figures
Figure 4-9 Removing KITL Setting in the Platform Settings Window ..........................................26
Figure 4-10 Build and Sysgen........................................................................................27
Figure 4-11 Building Process.........................................................................................28
Figure 4-12 After Building the OS Image...........................................................................29
Figure 5-1 Jumper Setting for crystal..............................................................................32
Figure 5-2 Jumper Setting for SDR Memory .......................................................................32
Figure 5-3 Jumper Setting for DDR Memory.......................................................................33
Figure 5-4 Switch Setting on CPU board for AMD flash boot.................................................... 33
Figure 5-5 DNW Window..............................................................................................34
Figure 5-6 UART/USB Options .......................................................................................35
Figure 5-7 DNW Window after Board Power ON .................................................................. 36
Figure 5-8 SDRAM Test................................................................................................36
Figure 5-9 Download & Run..........................................................................................37
Figure 5-10 Selecting NK.nb0 for Download....................................................................... 37
Figure 5-11 Downloading Status of NK.nb0........................................................................38
Figure 5-12 Jumper Setting for crystal ............................................................................39
Figure 5-13 Jumper Setting for SDR Memory......................................................................39
Figure 5-14 Jumper Setting for DDR Memory .....................................................................40
Figure 5-15 Switch Setting on CPU board for AMD flash boot ..................................................40
Figure 5-16 Switch Setting on Base board for NandAccess......................................................40
Figure 5-17 DNW Window ............................................................................................41
Figure 5-18 UART/USB Options......................................................................................42
Figure 5-19 DNW Window after Board Power ON.................................................................42
Figure 5-20 Selecting EBOOT.nb0 for Download..................................................................43
Figure 5-21 After EBOOT.nb0 Download........................................................................... 44
Figure 5-22 Boot Loader Configurations ...........................................................................45
Figure 5-23 Boot Loader Status after format .....................................................................47
Figure 5-24 Boot Loader configurations ...........................................................................48
Figure 5-25 Selecting block0img.nb0 for Download..............................................................49
Figure 5-26 Messages via UART Port after block0img.nb0 Download .........................................49
Figure 5-27 USB Boot Loader Configurations......................................................................50
Figure 5-28 Selecting EBOOT.bin for Download ..................................................................51
Figure 5-29 Messages via UART Port after eboot.bin Download ...............................................52
Figure 5-30 USB Boot Loader Configurations......................................................................53
Figure 5-31 Selecting NK.bin for Download ....................................................................... 54
Figure 5-32 Messages via UART Port during NK.bin Download .................................................55
Figure 5-33 Switch setting for Nand Advanced NAND(page 2KB, Addr 5) card booting...................55
Figure 5-34 Platform Settings 1.....................................................................................56
Figure 5-35 Platform Settings 2.....................................................................................57
Figure 5-36 Platform Setting for KITL..............................................................................58
Figure 5-37 Build and Sysgen........................................................................................59
Figure 5-38 Selecting Connectivity Options.......................................................................61
Figure 5-39 Target Device Connectivity Options Window.......................................................62
Figure 5-40 Messages via UART Port after NK.nb0 Download ..................................................63
Figure 5-41 Attach Device ...........................................................................................64
Figure 5-42 Platform Builder Window after USB Serial KITL connected......................................65
Figure 6-1 Jumper Setting for crystal..............................................................................66
Figure 6-2 Jumper Setting for SDR Memory .......................................................................67
Figure 6-3 Jumper Setting for DDR Memory.......................................................................67
Figure 6-4 Switch Setting on CPU board for AMD flash boot.................................................... 67
Figure 6-5 Switch Setting on Base board for NandAccess.......................................................67

S3C2450/ Mobile Solution/ IM-1.0-06-01
Property of Samsung Electronics Co., Ltd. Mobile Solution Group,
System LSI.
Public
vi
Figure 6-6 DNW Window..............................................................................................68
Figure 6-7 UART/USB Options .......................................................................................69
Figure 6-8 DNW Window after Board Power ON .................................................................. 69
Figure 6-9 Selecting EBOOT.nb0 for Download...................................................................70
Figure 6-10 After EBOOT.nb0 Download........................................................................... 71
Figure 6-11 Boot Loader Configurations ...........................................................................72
Figure 6-12 Boot Loader Status after format .....................................................................74
Figure 6-13 Boot Loader configurations ...........................................................................75
Figure 6-14 Selecting block0img.nb0 for Download..............................................................76
Figure 6-15 Messages via UART Port after block0img.nb0 Download .........................................76
Figure 6-16 USB Boot Loader Configurations......................................................................77
Figure 6-17 Selecting EBOOT.bin for Download ..................................................................78
Figure 6-18 Messages via UART Port after eboot.bin Download ...............................................79
Figure 6-19 USB Boot Loader Configurations......................................................................80
Figure 6-20 Selecting UBOOT(WINCE500)..........................................................................81
Figure 6-21 Selecting Chain.lst for Download.....................................................................82
Figure 6-22 Messages via UART Port during Chain.lst Download...............................................82
Figure 6-23 Messages via UART Port after fusing chain.lst .....................................................83
Figure 6-24 Switch setting for Nand Advanced NAND(page 2KB, Addr 5) card booting...................84
Figure 6-25 Platform Settings 1.....................................................................................85
Figure 6-26 Platform Settings 2.....................................................................................86
Figure 6-27 Platform Setting for KITL..............................................................................87
Figure 6-28 Build and Sysgen........................................................................................88
Figure 6-29 Selecting Connectivity Options.......................................................................91
Figure 6-30 Target Device Connectivity Options Window.......................................................92
Figure 6-31 Messages via UART Port after NK.nb0 Download ..................................................93
Figure 6-32 Attach Device ...........................................................................................94
Figure 6-33 Platform Builder Window after USB Serial KITL connected......................................95

S3C2450/ Mobile Solution/ IM-1.0-06-01
Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. 1
Public
1Overview
This Installation Manual guides you to install the Samsung S3C2450 Windows CE 5.0 BSP.
The manual explains the following topics:
•Copying BSP and Setting up Platform Builder
•Creating a New Platform
•Building OS Image – Without KITL
•Fusing WinCE Image via Ethernet
A detailed explanation of each topic is explained in the following chapters.

S3C2450/ Mobile Solution/ IM-1.0-06-01
Property of Samsung Electronics Co., Ltd. Mobile Solution Group,
System LSI.
Public
2
2Copying BSP and Setting up Platform Builder
In this chapter, you can understand how to copy the Samsung S3C2450 Windows CE 5.0 BSP and setup
the Platform Builder.
1. To start the BSP installation, copy SMDK2450 BSP to X:\WINCE500\PLATFORM directory on your
host PC. Make sure that the cec file and batch file in X:\WINCE500\PLATFORM\SMDK2450
directory has the same name as that of the BSP, i.e. smdk2450.cec and smdk2450.bat.
Note: If you want, you can use a different BSP directory name. But make sure that the cec file and
batch file has the same name as that of the BSP directory name.
Figure 2-1 Source Files
2. To start S3C2450 Windows CE 5.0 BSP Porting, on your host PC click Start, point to All Programs,
point to Microsoft Windows CE 5.0 and then click on Platform Builder 5.0. The following window
appears on your screen.

S3C2450/ Mobile Solution/ IM-1.0-06-01
Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. 3
Public
Figure 2-2 Platform Builder Window

S3C2450/ Mobile Solution/ IM-1.0-06-01
Property of Samsung Electronics Co., Ltd. Mobile Solution Group,
System LSI.
Public
4
3. On the File menu, click Manage Catalog Items…. as shown in the figure below.
Figure 2-3 Opening Manage Catalog Items Window

S3C2450/ Mobile Solution/ IM-1.0-06-01
Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. 5
Public
4. Manage Catalog Items window appears on your screen as shown below. Click Import… button.
Figure 2-4 Manage Catalog Items Window
5. Import Catalog Items window appears on your screen. Select SMDK2450.cec file from
X:\WINCE500\PLATFORM\SMDK2450 directory and then click Open button.
Figure 2-5 Import Catalog Items Window

S3C2450/ Mobile Solution/ IM-1.0-06-01
Property of Samsung Electronics Co., Ltd. Mobile Solution Group,
System LSI.
Public
6

S3C2450/ Mobile Solution/ IM-1.0-06-01
Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. 7
Public
6. Now SMDK2450.cec is added to Imported .cec files: list in Manage Catalog Items window as shown
in figure 2-6. Click Refresh button first and then OK click button.
Figure 2-6 Catalog Items Window after Adding SMDK2450.cec File
7. Look at Catalog\Third Party\BSPs directory on Catalog window. Confirm whether SMDK2450:
ARMV4I BSP is added properly as shown below. If not added properly, then remove SMDK2450.cec
file in the Imported .cec files: list from Manage Catalog Items window and then repeat steps 4~7
again.
Figure 2-7 Catalog window in Platform Builder

S3C2450/ Mobile Solution/ IM-1.0-06-01
Property of Samsung Electronics Co., Ltd. Mobile Solution Group,
System LSI.
Public
8
3Creating a New Platform
In this chapter, you can understand how to create a new platform using the Platform Builder.
1. On the File menu in the Platform Builder window, click New Platform… as shown in figure 3-1.
Figure 3-1 Creating New Platform

S3C2450/ Mobile Solution/ IM-1.0-06-01
Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. 9
Public
2. The following window appears on your screen. Click Next button to continue.
Figure 3-2 New Platform Wizard – Step 1

S3C2450/ Mobile Solution/ IM-1.0-06-01
Property of Samsung Electronics Co., Ltd. Mobile Solution Group,
System LSI.
Public
10
3. The Workspace Name And Location window appears on your screen. Type a platform name in the
Name box and then click Next button.
Figure 3-3 Platform Wizard – Step 2

S3C2450/ Mobile Solution/ IM-1.0-06-01
Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. 11
Public
4. The Board Support Packages (BSPs) window appears on your screen. Select SMDK2450: ARMV4I
and then click Next button.
Figure 3-4 New Platform Wizard – Step 3

S3C2450/ Mobile Solution/ IM-1.0-06-01
Property of Samsung Electronics Co., Ltd. Mobile Solution Group,
System LSI.
Public
12
5. The Design Template wizard window appears on your screen. Please select Mobile Handheld from
Available design templates list and then click Next button.
Figure 3-5 New Platform Wizard – Step 4

S3C2450/ Mobile Solution/ IM-1.0-06-01
Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. 13
Public
6. The following window appears on your screen. Here you select the Application & Media you want
to include in your platform and then click Next button.
Figure 3-6 New Platform Wizard – Step 5

S3C2450/ Mobile Solution/ IM-1.0-06-01
Property of Samsung Electronics Co., Ltd. Mobile Solution Group,
System LSI.
Public
14
7. The Networking & Communications wizard window appears on your screen. Click Next button.
Figure 3-7 New Platform Wizard – Step 6