Samsung WEP350 BLACK User manual

English / 中文

English . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
中文 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

1
English Contents
Safety and usage information....................................................2
Your headset overview .............................................................3
Charging the headset ...............................................................4
Turning the headset on or off ....................................................5
Understanding various modes....................................................5
Pairing with your Bluetooth phone..............................................6
Using call functions ..................................................................7
Warranty and parts replacement ................................................8
Correct disposal of this product ............................................... 10
Specifications ........................................................................ 11

2
Bluetooth
®
is a registered trademark of the Bluetooth SIG, Inc.
worldwide. Bluetooth QD ID: B012997
• Never disassemble or modify your headset for any reason.
Doing this may cause the headset to malfunction or become
combustible. Bring the headset to an authorised service
centre to repair it or replace the battery.
• When using your headset while driving, follow local
regulations in the country or region you are in.
• Avoid storage at high temperatures (above 50° C/122° F),
such as in a hot vehicle or in direct sunlight, as this can
damage performance and reduce battery life.
• Do not expose the headset or any of its supplied parts to
rain or other liquids.
Safety and usage information
At very high volumes, prolonged listening to the
headset can damage your hearing.

3
English
Your headset overview
If your headset responds slowly, stops responding, or
freezes, press the RESET button on the back of the
headset with a pointed tool.
Multi-Function
button
Volume
up button
RESET
button
Microphone
Earpiece
Volume
down button
Indicator
light
Earhook

4
1 Put the headset in the
charging case.
2 Plug the adapter into the
case's charging socket and the
outlet.
• When charging is complete,
the indicator light will
appear solid blue if the
headset is off or a blue light
will flash if the headset is
on.
• During charging, the indicator light will appear solid red if
the headset is off or red and purple lights will flash if the
headset is on.
Charging the headset
Do not attempt to charge the headset with anything
other than the adapter provided.
Charging the headset will not disrupt the connection
to the phone. You can use your headset right after
removing the charging case.
Adapter

5
English
To turn the headset on, press and hold the Multi-function
button until the blue indicator light flashes 4 times.
To turn the headset off, press and hold the Multi-function
button until both blue and red indicator lights flash.
•
Standby mode : The headset is waiting for a call. The blue
indicator light flashes every 3 seconds.
•
Active mode : The headset has a call in progress. The blue
indicator light flashes every 8 seconds.
•
Pairing mode : The blue indicator light stays lit. You can
discover and connect to your headset on your phone.
•
Low battery mode : There is less than 10% of battery
power left. The red indicator light flashes. You must
recharge the battery.
Turning the headset on or off
Understanding various modes

6
1 Enter Pairing mode.
• Turn off your headset and press and hold the Multi-
function button until the blue indicator light remains lit
after blinking.
• If you turn it on for the first time, it proceeds into Pairing
mode immediately.
2 Search for and pair with your phone according to your
phone’s user guide. (Bluetooth PIN: 0000, 4 zeros)
• If the pairing is successful, the blue indicator light will
flash 10 times rapidly before entering Standby mode.
• If the blue indicator light remains lit, retry pairing.
Pairing with your Bluetooth phone
When the headset and the phone are paired, the
headset attempts to reconnect automatically each
time it turns on. Otherwise, press the Multi-function
button to reconnect.

7
English
Some functions may not be supported by your phone.
In Standby mode
Press the Multi-function button to:
• Answer an incoming call
• Redial the last number called
Press and hold Multi-function button to:
• Make a voice-activated call
• Reject an incoming call
Press and hold [+] and [-] at the same time to turn the
indicator light on or off.
In Active mode
Press the Multi-function button to:
• End a call
• Transfer a call from the phone to the headset
Using call functions

8
Press and hold Multi-function button to:
• Place a call on hold
• Answer a second call
• Retrieve a call on hold
Press [+] or [-] to adjust the volume.
Press and hold [+] or [-] to turn the microphone off or on.
Samsung warrants this product as free of defects in material,
design and workmanship for the period of one year from the
original date of purchase. (Depending on your country, the
length of warranty may vary.)
If during the period of warranty this product proves defective
under normal use and service you should return the product to
the retailer from whom it was originally purchased or qualified
service center. The liability of Samsung and its appointed
maintenance company is limited to the cost of repair and/or
replacement of the unit under warranty.
Warranty and parts replacement