Samsung SBB-SSE Instruction manual

SBB-SSE/SSF/SSN Child Device Connection Manual
Copyright ⓒ2017 Visual Display Division, Samsung Electronics Co.,LTD.

SBB-SFF Connection Manual
Visual Display Division, Samsung Electronics Co., Ltd.
２
Contents
LFD SET V/W Connection Environment ....................................................................................................................................... ３
LFD SET Author V/W Connection Environment ............................................................................................................................. ４
SBB Setting Value for Child Device Searching.............................................................. ５
Child Device Setting Value ................................................................................... ６
Child Device Searching method by MagicInfo S ............................................................ ７
History ..........................................................................................................................................................................１０

LFD FlashUpdate Tool Manual
Visual Display Division, Samsung Electronics Co., Ltd.
３
SBB connection using LFD Set
.

SBB-SFF Connection Manual
Visual Display Division, Samsung Electronics Co., Ltd.
４
SBB Connection for V/W Layout using MagicInfo Server

LFD FlashUpdate Tool Manual
Visual Display Division, Samsung Electronics Co., Ltd.
５
SBB Setting Value for Child Device Searching
※SBB-SSF/SSE/SSN must set to RJ45(Lan)Cable for Childe Device Searching.

SBB-SFF Connection Manual
Visual Display Division, Samsung Electronics Co., Ltd.
６
Child Device Setting Value
※Child Device must set to RS232 Cable.

LFD FlashUpdate Tool Manual
Visual Display Division, Samsung Electronics Co., Ltd.
７
Child Device Searching method by MagicInfo S
1) Approve by Server
➔Unapproved -> Select SSF -> Selct “Approve”

SBB-SFF Connection Manual
Visual Display Division, Samsung Electronics Co., Ltd.
８
2) Searching Scan Device by Server : Click -> Conneted Device Info -> Scan Device

LFD FlashUpdate Tool Manual
Visual Display Division, Samsung Electronics Co., Ltd.
９
3) you can see connected status like as below picture
➔if you can not see then check a slave monitor status and RS232 Cable connection.
※Do not connected RS232 In to SBB-F

SBB-SFF Connection Manual
Visual Display Division, Samsung Electronics Co., Ltd.
１０
FAQ
. We have a child model Device Dection issue.
If you can not detect all connected child device using Device ID Auto Set
then Please check using”RS232 MDC Connect Guide_Eng_v0.9.ppt“.
※Tip : Device ID Auto Set fucdtion was support at all model except outdoor model.
So, you can easily check where is have a issue like as below method.
Ex) SBB-SSN + 4 Child device connect.
First, execute Device ID Auto Set using SBB-SSN : must detecteded four monitors.
Second, execute Device ID Auto Set using first child device : must dectected three monitors.
Third, execute Device ID Auto Set using second child device : must dectected two monitors.
※Tip : if child device gone to stand by mode then might not detec child device.
So, check a child device’s state before Device ID Auto set.

LFD FlashUpdate Tool Manual
Visual Display Division, Samsung Electronics Co., Ltd.
１１
History
Version
Date
History
Writer
0.9
2017.11.21
Initial version
B.i.cHOI
0.91
2019.08.20
Add SSN and Q&A
B.i.cHOI