Samsung AH68-01633B User manual

- MP3, WMA , ASF and Ogg Playback
- Removable Storage Device
- Direct MP3 Recording
- 3D Sound
- USB 2.0 Support
- Upgradable
- 20 Hours of Continuous Play
- Voice Recording Function
AH68-01633B (Rev 0.0)

ENG
3
ContentsContents
2
Safety Instructions................................................................................................................................................4
Features ..............................................................................................................................................................6
Components ........................................................................................................................................................8
Location of Controls ............................................................................................................................................9
IPreparations
Playing Music and Turning Off the Device ........................................................................................................22
Hold Function ....................................................................................................................................................23
Recording Voice ................................................................................................................................................23
MP3 Encoding ....................................................................................................................................................24
Searching for Music/Voice Files ........................................................................................................................25
IBasic Usage
Connecting the player to PC ..............................................................................................................................11
Manual Installation of USB Driver ......................................................................................................................15
Using the removable storage(PC)......................................................................................................................18
●Downloading/Uploading files ........................................................................................................................18
●Disconnecting the USB cable........................................................................................................................18
●Formatting ....................................................................................................................................................19
Installing yepp Studio ........................................................................................................................................20
To View Help on yepp Studio ............................................................................................................................21
IConnection to Computer
Loop Repeating ..................................................................................................................................................26
MENU Options ..................................................................................................................................................27
Using Navigation ................................................................................................................................................28
Setting Playlist....................................................................................................................................................31
Setting the Advanced Functions ........................................................................................................................32
Selecting the Playmode......................................................................................................................................33
Setting the EQ mode..........................................................................................................................................34
●Preset EQ......................................................................................................................................................34
●Bass Booster ................................................................................................................................................34
●WOW Set ......................................................................................................................................................35
●User EQ Set ..................................................................................................................................................36
Display................................................................................................................................................................37
●Scroll Speed ..................................................................................................................................................37
●Display Time..................................................................................................................................................37
●Backlight........................................................................................................................................................38
●Contrast ........................................................................................................................................................38
●Tag ................................................................................................................................................................39
●Language ......................................................................................................................................................39
Setting the System ............................................................................................................................................40
Encoding ............................................................................................................................................................42
Power Off Time ..................................................................................................................................................43
Managing Files ..................................................................................................................................................44
IAdditional Usage
Troubleshooting..................................................................................................................................................46
Specifications ....................................................................................................................................................48
ICustomer Support
MENU Table ......................................................................................................................................................45
IAppendix

5
Safety Instructions
ENG
Safety Instructions
4
Read and understand all the instructions to avoid injury to yourself and damage to the equipment.
Do not expose to extreme temper-
atures (above 95°F or below 23°F).
Do not expose to moisture.
Do not subject the unit to severe
impact, or place heavy objects
on it.
Do not let any foreign matter spill
into the device.
Be careful not to subject the
player to excessive pressure
when wearing it round your neck.
Do not expose to chemicals such
as benzene and thinners.
Remove batteries when the
device is left unused for a long
period of time.
Do not expose to direct sunlight
or heat sources.
Do not store in dusty areas. Do not try to disassemble and
repair the device yourself.
IEarphones
Follow Traffic Safety Instructions
● Do not use the earphones while driving an automobile or riding a bicycle.
It’s not only dangerous, but also against the law.
●It may cause an accident if you turn up the volume of the earphones while walking.
especially when crossing intersections.
Protect your ears
● Do not turn up the volume too high. Doctors warn against prolonged exposure to high volume.
● Stop using the device or turn the volume down if you have ringing in your ears.
IAmbient operating conditions
● Ambient temperature : 5°C ~ 35°C (41°F ~ 95°F)
Humidity : 10 ~ 75%
IEnvironmental Information
● Follow local guidelines for waste disposal when discarding packages, batteries,
and old electronic appliances.
● Your player is packaged with cardboard, polyethylene etc., and does not use any unnecessary materials.
✽ Please be aware that we claim no responsibility for damage from data loss
due to breakdown, repair or other causes.

7
Features
ENG
Features
6
MP3, WMA , ASF and Ogg Playback
●The player supports playback of MP3, WMA, ASF and Ogg.
Removable Storage Device
●You can easily copy and paste files to the player using Windows Explorer.
Direct MP3 Recording
●You can convert music from CDs, cassettes, and radio into
MP3 files without a PC.
3D Sound
●The 3D surround feature adds spaciousness to the sound.
USB 2.0 Support
●Maximum data speed transfer of 18 Mbps.
Upgradable
●You can upgrade the built-in programs when available.
Add functions, CODEC, etc. Please check the home page
(www.samsung.com) for upgrades.
20 Hours of Continuous Play
●This player uses one AAA/LR03 alkaline battery. Operation can last up to 20hours.
Actual playing time may vary according to the type and capacity of the battery.
Voice Recording Function
●You can make high quality voice recordings.

9
Location of Controls (yepp)
ENG
Components
8
● The capacity of the useable built-in memory is less than indicated as the internal firmware
uses a part of the memory as well.
● Design of accessories is subject to change for the purposes of improvement, without notice.
Model
Built-in memory
YP-T6 H
128MB
YP-T6 V
256MB
YP-T6 X
512MB
YP-T6 Z
1GB
Continued...
Recording Button
Play/Pause Button
Hold Switch
Loop Repeating Button
USB Cable
Connection Port
ENC Jack
Microphone
Earphones Hook
MENU, Navigation button/
Move to Track/Speed Search/
Volume Button
Display
Battery Cover
Earphone Jack
Player
Stylish necklace
type earphones
One Battery
(1.5V AAA/LR03 type)
USB Cable
User manual
Line In Cable
Installation CDCarrying case
Direct Connect
USB Adapter

ENG
11
Connecting the player to PCLocation of Controls (yepp)
10
The PC system must meet the
following specifications:
● Pentium 200MHz or greater
● Windows 98 SE/ME/2000/XP
● 40MB of available hard disk space
● CD-ROM drive
(double speed or greater)
● USB port (2.0) supported
● VGA graphic

System Requirements.
IInstalling software
IDisplay
IInserting a Battery
1 Slide the cover in the direction of
the arrow to open.
2 Insert a battery to the right poles
+ , – and push-close the cover in
the direction of the arrow as indicated.
1Insert the Installation CD into the
CD-ROM drive.
Select [Install yepp USB Driver].
NN
NNoo oott ttee ee
- Do not place heavy objects on the cover.
✍
Before connecting yepp to PC, make sure to install USB driver. If “Add New Hardware Wizard”
appears, press the [Cancel] button and install the USB driver.
NN
NNoo oott ttee ee
- Install the operating system in Administrator Account
mode for Windows 2000 or XP. Otherwise,
installation will not be completed.
- Windows ME, 2000 and XP can recognize the driver
without installing the provided program. However,
you must install the program in order to format yepp and
upgrade firmware.
- If the YP-T6 program has not been installed in Windows
98, then it will not communicate with your removable disk.
You must install the USB driver file first.
✍
Continued...
Title (track & artist) indicator
Play/Stop/Pause indicator
Track Number indicator
Remaining Battery Power indicator
Play mode indicator
Equalizer, SRS indicator
Playtime indicator
N

ENG
13
Connecting the player to PC
12
2 Follow the instructions in the window to complete the installation.
1 Connect the USB cable to the USB port on the computer.
2 Connect the other end of the USB cable to the USB cable connection port on
the bottom of the player.
● If you disconnect the USB cable from your PC while implementing a
command or initializing during USB driver installation, your PC may not
function correctly.
3 The USB driver is installed with a message saying that it is searching for a new
device. You may not see the display screen during installation.
Go to the device manager to check that installation has been successfully
completed.
4 Upon installation of the USB driver "Samsung yepp YP-T6 USB Device" will
appear in the [System Properties] ➝[Device Manager].
IConnecting yepp to PC with the USB cable
Continued...
Connecting the player to PC
NN
NN
USB connect cable

15
Manual Installation of USB Driver
ENG
Connecting the player to PC
14
How to check USB driver
How to check USB driver
Windows 98:
Control Panel ➝ System ➝ Device Manager ➝ Disk Drives ➝ Samsung yepp YP-T6
Windows 2000:
Control Panel ➝ System ➝ Hardware ➝ Device Manager ➝ Disk Drives ➝
Samsung yepp YP-T6 USB Device
Windows XP:
Control Panel ➝ System ➝ Hardware ➝ Device Manager ➝ Universal Serial Bus controllers ➝
Disk Drives ➝Samsung yepp YP-T6 USB Device
5 When the USB driver is not installed automatically, refer to the next page.
NN
NNoo oott ttee ee
- If you are using Windows 2000 and your version of Windows does not recognize the USB driver
please download and install the latest service pack from windowsupdate.microsoft.com
- The installation method may vary depending on the type of PC or operating system.
Contact your PC dealer or service center for installation information.
- If errors occur continuously when you install the USB driver, reconnect the USB cable after
rebooting your system.
✍
I When an error occurs during installation of the USB driver
1Check the device manager.
Windows 98,ME:
Control Panel ➝ System ➝ Device Manager
Windows 2000:
Control Panel ➝ System ➝ Hardware ➝
Device Manager
Windows XP:
Control Panel ➝ System ➝ Hardware ➝
Device Manager
2Check if there is a device listed with an exclamation point or a question mark
(displayed as unknown device or USB device).
3Double click on the device listed with an exclamation point or a question mark.
Go to “Downloading/Uploading files” if the USB driver is in installed.
Follow these steps if the USB driver is not in installed :

17
Manual Installation of USB Driver
ENG
Manual Installation of USB Driver
16
IIn Windows 98
Follow the instructions in the window to complete the installation.
USB driver location
[CD ROM]\setup\Drivers
: You must reboot your computer to complete the installation.
N
N
N
NN
NNoo oott ttee ee
- You cannot use it as a removable disc in Windows 98 if the YP-T6 program is not installed.
Make sure to install the USB driver file first.
✍
4After selecting the driver,
click [Update Driver]. 5Click [Next].
6Select [Search for a suitable driver
for my device] and then click [Next]. 7Click [Next] to finish.

19
Using the removable storage(PC)
ENG
Using the removable storage(PC)
18
IDownloading/Uploading files
IFormatting
1Connect the player to your PC with the supplied USB cable.
2Open Windows Explorer on PC.
● Removable Disc is displayed in Windows Explorer.
3Select the file to save and drag-and-drop it into the removable disk icon.
(In numerical, alphabetical order)
● If you change the name of music files in Windows Explorer like 001* * * , 002* * *...,
music files will be played in the order of number indicated.
2When the
[Stop a Hardware device]
message appears, press
the [OK] button and
disconnect the USB cable.
1Select the removable disc icon
and click the right mouse button
to select [Format].
2Press the [Start] button.
● All saved files will be formatted.
● You can change the name of removable disc
by selecting [Volume label].
IDisconnecting the USB cable
1Double-click on the green arrow in the taskbar on the
bottom right of the window.
NN
NNoo oott ttii iicc ccee ee
- The “WRITING/READING” message will appear during
file download or upload. Disconnecting the USB cable
while “WRITING/READING” is displayed may cause
malfunction of the unit.
- The order of music files is not relative to the replay order
when you select a Removable Disc in Windows Explorer.
✍
NN
NNoo oott ttee ee
- By formatting, all previously preset menus will be initialized.
- Care must be taken as formatted files can not be recovered.
✍
Continued...
After completing the file transfer, you must disconnect the cable in the following way:
N

21
To View Help on yepp Studio
ENG
Installing yepp Studio
20
1Insert the Installation CD into CD-ROM drive.
Select [Install yepp Studio].
Run yepp Studio and press F1.
● Help will appear.
Move the arrow to the top of yepp Studio and right click on the
mouse. The following selection window will appear.
● Click on Help and the Help window will appear.
3Follow the instructions in the window to complete the installation.
● Please refer to Help for more information on how to use yepp Studio.
2Select language
NN
NNoo oott ttee ee
- Music recognition technology and related data are provided by Gracenote and Gracenote
CDDB® Music Recognition ServiceSM.
- CDDB is a registered trademark of Gracenote. The Gracenote logo and logotype,
the Gracenote CDDB logo and logotype, and the "Powered by Gracenote CDDB" logo are
trademarks of Gracenote. Music Recognition Service and MRS are service marks of Gracenote.
✍
N
yepp Studio is the program that can convert and play back the music files in PC.

ENG
23
HOLD FunctionPlaying Music and Turning Off the Device
22
NN
NNoo oott ttee ee
- If the file name is not displayed correctly, move to [Settings] ➔[Display] ➔[Language] and
then change the language setting.
- WMA files can only be played as music files with a compression rate of 48Kbps-192Kbps.
- The power off time can be set in the menu.
✍
ITurning Power On and Off
Power On : Press the button to turn on the power.
Power Off : Press and hold the button to turn off the power.
IAdjusting the Volume
Press the joystick up or down to adjust the volume from 00 to 30.
In Hold mode, all buttons are disabled.
Slide the switch in the direction of the arrow.
❈ When the button is pressed, the “ HOLD!” message will appear on the display.
IPlaying Music (Power On)
Press the button.
● Playback starts.
1Press and hold the REC button to start voice recording.
2Press the REC button again to stop the recording and save the voice file.
✽To move to other modes from the Voice mode,
refer to “Changing Mode”.
NN
NNoo oott ttee ee
- The files are recorded in the order of V001,V002......,
and saved as WAV file in the VOICE folder after recording.
- If the Memory is full, Voice Recording is stopped automatically.
✍
IPausing Music (Power Off)
Press the button to pause playback.
● If no buttons are pressed within 10 seconds (changes depending on settings),
the player automatically powers off.
● While in Pause mode, press the button again to resume playback.
Recording Voice

25
Searching for Music/Voice Files
ENG
MP3 Encoding
24
✽To move to other modes from LINE_ENC mode,
refer to “Changing Mode”.
1Connect the Audio Output port on the external audio source
(or the Line Out port) to the ENC port on the device with the Line cable.
2Press and hold the REC button to start MP3 encoding.
● If the button is pressed, encoding is paused and if the button is pressed again,
the encoding resumes.
3If the REC button is pressed during encoding, the encoding stops and an
encoding file is created.
● The files are encoded in the order of L001, L002....
and saved as MP3 file in LINE_ENC folder after encoding.
NN
NNoo oott ttee ee
- Bit Rates can be set within the range of 32Kbps~128Kbps.
- Volume can be adjusted while monitoring the Encoding.
✍
NN
NNoo oott ttii iicc ccee ee
- Do not disconnect the Line cable during Encoding.
- If the battery is not sufficiently charged, the player will not completely encode the file.
- Adjust the volume of the external audio source to a suitable level and encode it.
If the volume level is too high, the sound quality may be poor.
✍
● Press and hold the joystick left or right during playback to search for
the part you want to listen to.
● Release the joystick to resume play normally.

To search for specific parts during play
● Press the joystick to the position briefly during playback to play the next track.
● Press the joystick to the position briefly within 5 seconds after playback starts,
to move to and play the previous track. Press the joystick to the position briefly
after five seconds to play the current track from the beginning.

To change tracks during play
● Press the joystick left or right in stop mode to move
to the previous/next track.

To change tracks when stopped
NN
NNoo oott ttee ee
- VBR(Variable Bit Rate) file: A file that constantly changes the compression rate according
to the type of sounds, such as their pitch, in the file.
- In the case of a VBR file, you cannot move to and play the previous track even if you press
the joystick to the position within 5 seconds after playback starts.
- Files that were downloaded in MP2 or MP1 and had their file extension changed to MP3
may not play.
✍

ENG
27
MENU Options
Press and hold the button to switch to MENU mode.
Use , to move and press the button briefly to select the menu you want.
Press and hold the button to exit the MENU mode.
NN
NNoo oott ttee ee
- Menu mode will be cancelled if no buttons are pressed within 15 seconds
✍
● Now playing : To check the file currently playing.
● Navigation : To move to Navigation Mode
● Playlist : To play back only the files you want
● Settings : To set the yepp functions
● Exit : To exit MENU
Loop Repeating
26
While playing music files, press the A↔Bbutton
briefly at the beginning of the loop you want to set.
A↔appears in the display.

Starting Point
Press the A↔Bbutton briefly again to set the
end of the loop.
A↔Bappears in the display.
The loop is played repeatedly.

Ending Point
NN
NNoo oott ttee ee
- Press the A↔B button briefly to cancel the loop.
- Loop Repeat is automatically released if you Speed Search with , .
✍

29
Using Navigation
ENG
Using Navigation
28
IChanging Mode
1Press the button in the
Voice mode.
2Use to move to the upper folder.
You can change the mode in the following method.
Ex) To change from the Voice mode to the Music mode
3Use , to move to the music file you want and press the button.
●As it is changed to the Music mode, the selected file will be played.
NN
NNoo oott ttee ee
- Press and hold the button in Navigation mode to exit the Navigation mode.
✍
1Press the button to enter Navigation mode.
or press and hold the button to move to Menu and then select
Navigation in Menu.
2Select the file or folder that you want to play.
● : When moving to a higher-level folder.
●: When moving to a lower-level folder.
●, : When moving to a file or folder in the same directory.
●: Move to the next folder down. When there is not a lower folder,
the selected file will be designated as part of the playlist.
3Press the button.
●The selected file will be played.
You can easily search for files or switch modes using the Navigation function.

31
Setting Playlist
ENG
Using Navigation
30
IPlaying/Exiting Folder
1Press the button to move to the Navigation mode.
2Use , to move to the folder you want and press the button.
●When " " appears, the selected file will be played.

Playing Folder
1Press the button during folder playback to move to the Navigation mode.
2Use , to move to the file you want and press the button.
●After folder play is released, " " mark will appear and the selected file will be played.

Exiting Folder Play
ISetting Playlist
IPlaying Playlist
1Press and hold the A↔B button in music mode or select Playlist in Menu.
●The playlist you set will be displayed.
2Move to the file you want to play and press the button.
●“ ” mark appears and the selected file will be played.
- Move to the file you want in Navigation mode and press the button.
●The selected file will be marked.
●To exit the playlist setting,
move to the marked file in Navigation mode and press the button again.

33
Selecting the Playmode
ENG
Setting the Advanced Functions
32
1Select Settings in the MENU. (refer to “MENU Options”)
2In Settings, use , to move to the function you want and
press the button to select.
●To move to a previous menu, use or select Return.
1Select Play Mode in Settings.
2In Play mode, use , to move to the mode you want and press
the button to select.
● Normal: To play all the tracks in order one time.
● Repeat one: To repeat one track.
● Repeat all: To repeat all tracks.
● Shuffle: To play tracks at random.
● Intro: To listen to the first part of all saved tracks for 10 seconds.
● Return: To move to a previous menu

35
Setting the EQ mode
ENG
Setting the EQ mode
34
1Select My Sound in Settings.
2In My Sound, use , to move to the sound mode you want and press
the button. ●Use , to select the SRS function you want and
then press the button.
●The SRS function is applied only when you select the
SRS, TruBass or WOW in the Preset EQ.
●Use , to move to the sound mode you want and then press the button.
●SRS → TruBass → WOW → Normal → Classic → Jazz → Rock → User
●Select User EQ Set to set the EQ as desired.
●SRS : You will hear 3D Stereo sound.
Use , to adjust SRS from 0 to 10.
●TruBass : This is a bass boost feature that adds fullness
to the sound.
Use , to adjust TruBass from 0 to 10.
●Focus : You can enjoy clearer tone during playback.
Use , to set Focus and then
press the button.
High → Middle → Low
●Optimum : Optimize the SRS function according to the device
connected to the main unit.
Use , to move to the connected device and
then press the button.
Earphone → Headphone → Speaker → Carpack
IPreset EQ
IWOW Set
●Use , to select Bass Booster On or Off and then
press the button.
●Bass Booster function is applied only when you select
Normal, Classic, Jazz or Rock in the Preset EQ.
●On: When the music is played back, the bass is
enhanced in the preset sound.
●Off: Music is played back in the preset sound.
IBass Booster

37
Display
ENG
Setting the EQ mode
36
●If User is selected in Preset EQ, EQ can be set to your
preference in the User EQ Set.
●Use , to move to right or left and use , to
adjust the level.
Press the key after completing the setting.
IUser EQ Set
NN
NNoo oott ttee ee
- is a trademark of SRS Labs, Inc.
WOW technology is incorporated under license from SRS labs, Inc..
- Please adjust the volume to a suitable level, as the volume may increase in the SRS setting.
- This unit supports sampling frequencies of 32KHz, 44.1KHz or 48KHz.
- The SRS function is not set for voice recording files.
✍

Scroll Speed
Select Display in Settings.
● Use , to set the scroll speed from X1 to X5 to adjust
the speed of the track title movement.

Display Time
● Use , to select the display time.
● Count Up: Current playback time is displayed.
● Count Down: Remaining time from total playback time is
displayed.
● Total Time: Total playback time is displayed.

39
Display
ENG
Display
38

Tag
● Use , to select Tag On or Off.
● On: Display the Tag information if the music file has Tag
information. Display the file name if the music file has no
Tag information.
● Off: Display the name of music file.

Contrast
● Use , to set the contrast from 0 to 10 to adjust the
brightness of the screen.

Language
● Use , keys to select the language for displaying Tag information and menu.
● Chinese(S) → Chinese(T) → English → French → German →
Italian → Japanese → Korean → Russian → Spanish

Backlight
[ Jog ]
● Use , to set the Light-On time from
Off to 60 seconds.
● When set to On, the Light stays on continuously.
[ LCD ]
● Use , to set the LCD Light-Off time from
Off to 60 seconds
● When set to On, the Light stays on continuously.