Samsung Yepp YP-N30 User manual

Connecting the USB cable
USB connect cable
1Plug one end of the USB cable into the USB port
on the PC.
2Insert the battery into the yepp and turn on the
power.
3Slide down the bottom cover of the player.
Plug the other end of the USB cable
into the USB port on the right side at the bottom.
● If you disconnect the USB cable from your PC while
implementing a command or initializing during USB driver
installation, your PC may not function correctly.
4USB driver is installed with a message saying that
it is searching for a new device. You may not see
the display screen during installation. Go to the
device manager to check that installation has
been successfully completed.
5When USB driver is installed, "SAMSUNG YP-
N30” will appear in [System Properties] ➝
[Device Manager]
YP-N30 Quick Guide
➤Before connecting yepp to PC, make sure to install USB driver.
Location of Controls
Earphone Jack
Microphone
Neck strap Hook
Display
Voice Recording Button MENU/Loop Repeating Button
Hold Switch
USB Cable Connection Port
Volume
Play/Stop/Pause/Forward/Backward
Button
Playing Music
Stopping Music
When you press the button, the yepp logo appears and a music/voice file is played.
When you press the button while playing, the music stops. If no buttons are pressed
within 5 seconds (changes depending on settings), the yepp automatically powers off.
21
Quick-N30 2/14/04 1:29 PM Page 2

Downloading/Uploading files
1Turn on the yepp and connect it to your PC.
2Open Windows Explorer on PC.
3Select the file to save and drag-and-drop it into the removable disk icon.
The saved files will be played in the order they were downloaded. Once
they are downloaded you cannot change the sequence of play.
NN
NNoo oott ttee ee :: ::
●Do not create new folders within the removable disk directory as the files saved in the newly
created folders will not play.
●Music files such as MP3, WMA and SM3 can not be uploaded to your PC due to copyright
protection.
NN
NNoo oott ttii iicc ccee ee :: ::
●The “WRITING” message will appear during file download or upload. Disconnecting the USB cable
while “WRITING” is displayed may cause malfunction of the unit.
Disconnecting the USB cable
1Select the removable disk icon and click the right mouse button to select
[Eject].
2Select [OK] and disconnect the USB cable when a picture appears as
shown below.
After completing file transmission, you must disconnect the cable in the following way:
3 4
AH68-01506A (Rev 0.0)
Quick-N30 2/14/04 1:29 PM Page 4