Samsung MWR-WW10JN User manual
Airto WaterHeat Pump
Installation manual
Wired remote controller MWR-WW10JN
࡛Thank you for purchasing this Samsung Product.
࡛Before operating this unit, please read this installation manual carefully and retain it for
future reference.
2English
Contents
Safety Information 3
Safety Information 3
Wired Remote Controller Installation 4
Wired Remote Controller Installation 4
External Dimensions 4
Wired Remote Controller Installation 5
Tracking Your Indoor Unit from the Wired Remote Controller [See the image A] 8
Individual control with your wired remote controller 9
Group control with yourwired remote controller 10
Controlling 2-remote controller 11
Sharing the temperature of hot water tank sensor 12
Initializing Your Wired Remote Controller Communication 14
Errors displayed on the Wired Remote Controller 14
Installation/Service mode 15
Installation/Service mode 15
Additional functions of the Wired Remote Controller [See the image B] 15
Installation/Service mode 16
The example of Wired Remote Controller option setting method 21
How to download to microSD Card 21
Self-test mode of wired remote controller 23
Use of self-test mode [See the image D] 23
Safety Information
3
English
This installation manual explains how to install a Wired Remote Controller connected to the indoor unit of your
Samsung system air conditioner. Please read this manual thoroughly before installing the product. (Please refer to
appropriate installation for any optional product installation.)
Safety Information
WARNING
Hazards or unsafe practices that may result in severe personal injury or death.
CAUTION
Hazards or unsafe practices that may result minor personal injury or property damage.
WARNING
Contact a service centre for installation.
࡛Potential risk of malfunction, water leak, electric
shock and fire.
Install the product on a hard and even place that can
support its weight.
࡛If the place cannot support its weight, the product
may fall down and it may cause product damage.
Install the product with proper power supply.
࡛Potential risk of fire or product damage.
Do not move or reinstall the product on your discretion.
࡛Potential risk of electric shock or fire.
Consult the place of purchase or a contact centre to
disassemble or repair the product.
࡛Potential risk of malfunction, electric shock, or fire.
Check if the installation work is done correctly
according to the installation manual.
࡛Incorrect installation may cause electric shock or
fire.
The electric work must be done by qualified person
according to national wiring regulations and
installation guide.
࡛If an unauthorized person performs the installation,
any resulting defects can cause malfunctions,
electrical shocks, or fire accidents.
When you want to dispose your Wired Remote
Controller, ask the service centre.
CAUTION
Do not install the product where there’s combustible
gas.
࡛Potential risk of fire and explosion.
Do not install the product in areas exposed to oil or
vapor.
࡛Potential risk of product damage or malfunction.
Ensure no water gets into the Wired Remote Controller.
࡛Potential risk of electric shock or fire.
Do not put undue stress on the power cable.
࡛Potential risk of broken cable and fire.
Install the air conditioner away from direct exposure
to sunlight, in room temperature range of 0 °C(32 °F)~
39 °C(102 °F).
࡛Potential risk of electric shock or malfunction.
Do not install the product in areas with frequent use of
acid or alkali spray.
࡛Potential risk of electric shock or product
malfunction.
Do not handle the product with sharp objects.
࡛Potential risk of electric shock or product damage.
Do not connect power cable to a communication
terminal.
࡛Potential risk of fire.
Be cautious not to interfere any other electrical devices
if the product is installed in a place such as hospital.
࡛Potential risk of product malfunction.
Wired Remote Controller Installation
4English
Wired Remote Controller Installation
Wired Remote ControllerInstallation
Wired Remote Controller Installation
External Dimensions
[Unit : mm(inch)]
120.0 (4.72) 19.0(0.75)
120.0 (4.72)
5
English
Wired Remote ControllerInstallation
Wired Remote Controller Installation
1 Insert the flat-head screwdriver into two square grooves at the bottom of the Wired Remote Controller and rotate
it to lift the front cover for removal from the rear cover.
2 Arrange the power cable and the communication cable so that they fit in the housing along the edges of the rear
cover.
<When the cable is not concealed> <When the cable is concealed>
8 cm (3.15 inch) 8 cm (3.15 inch)
Area A
NOTE
࡛When connecting the power and communication cables to the bottom of the Wired Remote Controller, first cut
off the area A.
Wired Remote Controller Installation
6English
Wired Remote Controller Installation
Wired Remote ControllerInstallation
3 Using two or more screws, firmly affix the rear cover of the remote controller to the wall, and then cut off the
grooves of the front covers for communication and power cables, making sure these cables have reasonable
length.
ߣߢ࣑ߢߦ
inch) or more
ߣߢ࣑ߢߦ
inch) or more
ߧߢ࣑ߤʀ˵࣒
or more
ߣߢ࣑ߢߦʀ˵࣒ͱθͱθʪ
Screw hole
Rear cover
࢜9ʪ˙ͱθʪ˙у˝ϩ˵ʪθʪɇθʀͱЭʪθࡥ
ϑʪʀЇθʪɇϩʪɇϑϩߣߢ࣑ߢߦʀ˵࣒
space of upper side, left side,
θ˝˵ϩϑʒʪࡥɇʒߧߢ࣑ߤʀ˵࣒
space of bottom side.
࢜ǽͱЇЇϑϩ˙ϩϩ˵ʪ
screws into the
screw holes.
4 Connect the communication cables (F3, F4) to the terminals of the back of the front cover, and then fix the wires
so that they do not get stuck during connection.
V1F1 F2 V2 F3 F4
PCB terminal
Front cover
Wire (not supplied)
࢜Uͱͱϩϩ˝˵ϩʪϩ˵ʪϑʀθʪиϑͱϩ˵ʪťA9
terminal with excessive force.
Indoor
Wired
Remote
Controller
CAUTION
࡛When using an electric screwdriver, tighten the screws to the standard torque because the top of screws may be
worn out if you use a strong torque.
7
English
Wired Remote ControllerInstallation
5 Reassemble the Wired Remote Controller.
NOTE
࡛Align the controllerwith the upper groove first, and then insert it by
turning it downwards as shown in the figure.
After assembly, check and confirm that no wires are stuck in the gap
between the back and front covers.
6 Remove the front protective film.
CAUTION
࡛ Ǯ˵ʪϑϩɇ˝ɇǮθʪʒŵʪͱϩʪAͱϩθͱʪθɵцЇϑ˝ɇʀɇɵʪͱ˝ʪθϩ˵ɇߣߢ࣑ߥߤߪߢ˙ϩ࣒ࡥцͱЇЇϑϩϑϩɇϩ˵ʪ
communication cable and the power cable separately. (Electrical interference can cause the Wired Remote
Controller to malfunction.)
࡛When installing yourWired Remote Controller on the wall, consider the size of the wire hole, and select a wire
with a proper thickness.
࡛Wire that is connectable to Wired Remote Controller PCB.
ࣞIf you install the Wired Remote Controller by reclaiming, install it according to U-terminal cable specification.
ࣞ Ã˙цͱЇϑϩɇϩ˵ʪǮθʪʒŵʪͱϩʪAͱϩθͱʪθɵцЇϑ˝ϩиͱΧʪʀʪϑͱ˙ťǤAиθʪࡥθʪͱЭʪϩ˵ʪߥߢʀ࣑ߣߤʀ˵࣒ͱ˙ϩ˵ʪ
sheath of the cable and install it only with the two pieces of wires. (Recommended specification: AWG20)
Wired Remote Controller Installation
8English
Wired Remote Controller Installation
Wired Remote ControllerInstallation
࡛The following are the specs of the compression ring terminal connected to your Wired Remote Controller PCB.
Stud
W
t
E
FG
L
ØD
ŵɇ˝ʪͱ˙ťʪθϩϩʪʒǮθʪϑ Rated Size Stud Size Basic Size [mm (inch)]
AWG mm²
(inch²)
mm²
(inch²)
mm
(inch) tØDG E F W L
22~16 0.25~1.65
(0.0003 ~ 0.0025)
1.5
(0.0023)
3
(0.1181)
0.7
(0.0275)
3.8
(0.1496)
10.0
(0.3937)
4.5
(0.1771)
6.5
(0.2559)
6.0
(0.2362)
21.2
(0.8346)
࢜đɇуЇʒϑϩɇʀʪ˙ͱθʀͱʪʀϩ˝ʀͱЇʀɇϩͱɇʒΧͱиʪθʀɇɵʪࡤߣߢߢ࣑ߥߤߪ˙ϩ࣒
࡛Screws on the PCB terminal must be tightened with less than 6N-cm tightening torque. If the tightening torque is
greater, it may damage the screw thread.
Tracking Your Indoor Unit from the Wired Remote Controller [See the image A]
1 Tracking of yourWired Remote Controller will automatically start when you turn on the power after installation.
2 If you want to perform tracking again after installation, then press the and buttons at the same time for
more than 5 seconds.
࡛The system will reset, and tracking will start again.
3 During tracking, the total number of currently searched indoor units will be displayed.
4 ÃϩɇцϩɇʪɇɵͱЇϩߧЇϩʪϑɇϩϩɇϑϩɇɇϩͱͱθи˵ʪцͱЇθʪࣛϑʪϩϩ˵ʪťͱиʪθđɇϑϩʪθϑʪϩϩ˝
NOTE
࡛The operation displays on the remote controller may differ depending on the selected language.
࡛If you want to perform tracking again after installation, then press the and buttons at the same time for
more than 5 seconds.
9
English
Wired Remote ControllerInstallation
Individual control with yourwired remote controller
ÃʒЭʒЇɇʀͱϩθͱʪɇϑϩ˵ɇϩцͱЇɇθʪЇϑ˝ͱʪθʪͱϩʪʀͱϩθͱʪθϩͱʀͱϩθͱͱʪʒͱͱθЇϩͱθͱʪUǤđ²цʒθͱЇϩࢩ²цʒθͱЇϩ²Ɵ
When connecting the Tank integrated Hydro Unit
Outdoor unit
Tank integrated
Hydro Unit
AĮđߣ࣑ߣࡥߤ࣒
Wired Remote
Controller
When connecting the DVM Hydro unit/Hydro unit HT only
Outdoor unit
DVM Hydro unit/
Hydro unit HT
DVM Hydro unit/
Hydro unit HT
DVM Hydro unit/
Hydro unit HT
AĮđߣ࣑ߣࡥߤ࣒
AĮđߤ࣑ߥࡥߦ࣒
AĮđߣ࣑ߣࡥߤ࣒
AĮđߤ࣑ߥࡥߦ࣒ AĮđߤ࣑ߥࡥߦ࣒
Wired Remote
Controller
Wired Remote
Controller
Wired Remote
Controller
CAUTION
࡛ ŵʪ˝ɇθʒʪϑϑͱ˙ϩ˵ʪUǤđ²цʒθͱЇϩࢩ²цʒθͱЇϩ²Ɵ˝θͱЇΧɇʒʒθʪϑϑ࣑ŵđAɇʒʒθʪϑϑ࣒ϑʪϩϩ˝ࡥͱцϩ˵ʪUǤđ²цʒθͱЇϩࢩ
²цʒθͱЇϩ²ƟʀͱʪʀϩʪʒϩͱAĮđߤϑʒЭʒЇɇцʀͱϩθͱʪʒ
Wired Remote Controller Installation
10 English
Wired Remote Controller Installation
Wired Remote ControllerInstallation
Group control with yourwired remote controller
θͱЇΧʀͱϩθͱʪɇϑϩ˵ɇϩцͱЇɇθʪЇϑ˝ͱʪиθʪʒθʪͱϩʪʀͱϩθͱʪθϩͱʀͱϩθͱϩиͱͱθͱθʪUǤđ²цʒθͱЇϩࢩ²цʒθͱ
unit HTs at the same time.
When connecting the DVM Hydro unit/Hydro unit HT only
1 Ƹϑ˝ͱʪиθʪʒθʪͱϩʪʀͱϩθͱʪθϩͱʀͱϩθͱϩ˵θʪʪUǤđ²цʒθͱЇϩࢩ²цʒθͱЇϩ²Ɵϑ
Outdoor unit
AĮđߣ࣑ߣࡥߤ࣒ AĮđߣ࣑ߣࡥߤ࣒
Wired Remote
Controller
AĮđߤ࣑ߥࡥߦ࣒ AĮđߤ࣑ߥࡥߦ࣒
AĮđߣ࣑ߣࡥߤ࣒
DVM Hydro unit/
Hydro unit HT
DVM Hydro unit/
Hydro unit HT
DVM Hydro unit/
Hydro unit HT
2 Ƹϑ˝ͱʪиθʪʒθʪͱϩʪʀͱϩθͱʪθϩͱʀͱϩθͱUǤđ²цʒθͱЇϩࢩ²цʒθͱЇϩ²Ɵϑʀͱʪʀϩʪʒϩͱʒ˙˙ʪθʪϩͱЇϩʒͱͱθЇϩ
Outdoor unit
Wired Remote
Controller
Outdoor unit
AĮđߣ࣑ߣࡥߤ࣒
AĮđߤ࣑ߥࡥߦ࣒
AĮđߣ࣑ߣࡥߤ࣒
AĮđߤ࣑ߥࡥߦ࣒
DVM Hydro unit/
Hydro unit HT
DVM Hydro unit/
Hydro unit HT
CAUTION
࡛ ŵʪ˝ɇθʒʪϑϑͱ˙ϩ˵ʪUǤđ²цʒθͱЇϩࢩ²цʒθͱЇϩ²Ɵ˝θͱЇΧɇʒʒθʪϑϑ࣑ŵđAɇʒʒθʪϑϑ࣒ࡥͱцϩ˵ʪUǤđ²цʒθͱЇϩࢩ²цʒθͱ
Їϩ²ƟϑʀͱʪʀϩʪʒϩͱAĮđߤɇθʪʀͱϩθͱʪʒ˝θͱЇΧ
࡛ ŵʪ˝ɇθʒʪϑϑͱ˙цͱЇθͱЇϩʒͱͱθЇϩϑࡥцͱЇʀɇʀͱϩθͱɇɇуЇͱ˙ߣߨUǤđ²цʒθͱЇϩࢩ²цʒθͱЇϩ²Ɵϑɇϑɇ˝θͱЇΧ
11
English
Wired Remote ControllerInstallation
Controlling 2-remote controller
ߤࣛŵʪͱϩʪʀͱϩθͱʪθϑʀͱϩθͱ˝ͱʪUǤđ²цʒθͱЇϩࢩ²цʒθͱЇϩ²Ɵиϩ˵ϩиͱθʪͱϩʪʀͱϩθͱʪθϑ
When setting the wired remote controller as ‘Indoor temperature standard/wired remote controller sensor use’,
please install the main remote controller at indoor places.
Wired Remote
Controller
Wired Remote
Controller
AĮđߤ࣑ߥࡥߦ࣒
AĮđߣ࣑ߣࡥߤ࣒
Outdoor unit
DVM Hydro unit/
Hydro unit HT
CAUTION
࡛For the sub wired remote controller settings, please refer to the sections about the wired remote controller
ϑϩɇɇϩͱࢩϑʪθЭʀʪͱʒʪ࣑ŵʪ˙ʪθϩͱΧɇ˝ʪߣߨ࣒ߢࡤđɇࡥߣࡤƊЇɵ
Wired Remote Controller Installation
12 English
Wired Remote Controller Installation
Wired Remote ControllerInstallation
Sharing the temperature of hot water tank sensor
Connecting one wired remote controller
Outdoor unit
Unit No. 2Unit No. 1 Unit No. 3
Wired Remote
Controller
AĮđߣ࣑ߣࡥߤ࣒ AĮđߣ࣑ߣࡥߤ࣒ AĮđߣ࣑ߣࡥߤ࣒
AĮđߤ࣑ߥࡥߦ࣒ AĮđߤ࣑ߥࡥߦ࣒
Hot water tank
sensor
Hot water tank
DVM Hydro unit/
Hydro unit HT
DVM Hydro unit/
Hydro unit HT
DVM Hydro unit/
Hydro unit HT
ex)
Unit No. Watertank sensor cable wiring 05 Series install option SEG24 setting
1 Connected 0
2 Not connected 1
3 Not connected 1
13
English
Wired Remote ControllerInstallation
Connecting 2 or more wired remote controller
Outdoor unit
AĮđߣ࣑ߣࡥߤ࣒ AĮđߣ࣑ߣࡥߤ࣒ AĮđߣ࣑ߣࡥߤ࣒
Wired Remote
Controller
Wired Remote
Controller
AĮđߤ࣑ߥࡥߦ࣒ AĮđߤ࣑ߥࡥߦ࣒
Hot water tank
sensor
Hot water tank
DVM Hydro unit/
Hydro unit HT
DVM Hydro unit/
Hydro unit HT
DVM Hydro unit/
Hydro unit HT
Unit No. 1 Unit No. 2 Unit No. 3
ex)
Unit No. Watertank sensor cable wiring 05 Series install option SEG24 setting
1 Connected 0
2 Connected 0
3 Not connected 1
CAUTION
࡛ Ã˙ϩ˵ʪUǤđ²цʒθͱЇϩࢩ²цʒθͱЇϩ²Ɵʪʪʒϑϩͱϑ˵ɇθʪϩ˵ʪϩʪΧʪθɇϩЇθʪЭɇЇʪͱ˙ϩ˵ʪ˵ͱϩиɇϩʪθϩɇࡥϩЇϑϩɵʪ
ʀͱʪʀϩʪʒϩͱϩ˵ʪϑɇʪθʪͱϩʪʀͱϩθͱʪθϩ˵ɇϩϑʀͱʪʀϩʪʒϩͱͱϩ˵ʪθUǤđ²цʒθͱЇϩࢩ²цʒθͱЇϩ²Ɵϩ˵ɇϩϑ
connected directly to the hot water tank with a temperature sensor. Also, when there are more than 2 wired
remote controllers, they should be connected to same communication line.
࡛ Ǯ˵ʪЇϩΧʪЇϩϑ࣑UǤđ²цʒθͱЇϩࢩ²цʒθͱЇϩ²Ɵ࣒ɇθʪʀͱʪʀϩʪʒϩͱͱʪиθʪʒθʪͱϩʪʀͱϩθͱʪθࡥϩцΧʪͱ˙ϩ˵ʪ
units must be same.
ࣞ U˙˙ʪθʪϩϩцΧʪϑͱ˙Їϩϑ࣑UǤđ²цʒθͱЇϩࢩ²цʒθͱЇϩ²Ɵ࣒ϑ˵ͱЇʒͱϩɵʪʀͱʪʀϩʪʒϩͱϩ˵ʪϑɇʪиθʪθʪͱϩʪ
controller
Wired Remote Controller Installation
14 English
Wired Remote Controller Installation
Wired Remote ControllerInstallation
Initializing YourWired Remote Controller Communication
Wired remote controller must be initialized if installation status changes.
࡛Changing number of indoor unit or their address
1 Press the and buttons at the same time for more than 5 seconds.
࡛Your Wired Remote Controller will be initialized, and the device will search for the indoor units connected to
your Wired Remote Controller again.
Errors displayed on the Wired Remote Controller
Error codes for the Wired Remote Controller and the product connected to your Wired Remote Controller will be
displayed in the LCD display.
Wired Remote Controller error codes
Display Contents
Communication error between remote controller and the Hydro unit/Hydro unit HT
Communication error between main and sub remote controller
Tracking error between remote controller and the Hydro unit/Hydro unit HT
Error due to exceeding maximum numbers of Hydro unit installation (16 units)
Error caused by installing mixed models
Remote controller's temperature sensor is disconnected or has problem
Uɇϩɇʪθθͱθͱθʪͱϩʪʀͱϩθͱʪθ࣑đʪͱθцθʪɇʒࢩиθϩʪʪθθͱθ࣒
15
English
Installation/Service mode
Installation/Service mode
Additional functions of the Wired Remote Controller [See the image B]
1 If you want to use the various additional functions foryour Wired Remote Controller, press the and
buttons at the same time for more than 3 seconds.
࡛The password entry screen appears.
2 Enter the password, “0202,” and then press the button.
࡛The settings screen for installation/service mode appears.
3 See the list of additional functions for the Wired Remote Controller on the next page, and then select the desired
menu.
࡛Once you have entered the setting screen, the current setting appears.
࡛Refer to the chart for data setting.
࡛Using the /buttons, change the settings and press the button to move to the next setting.
࡛Press the button to save the new setting.
࡛Press the button to move to the Home screen.
NOTE
࡛While setting the data, you can press the button to move to the Home screen after checking the saving status
at a pop-up screen.
Installation/Service mode
16 English
Installation/Service mode
Installation/Service mode
Installation/Service mode
NOTE
࡛Unavailable functions are marked inactive and they cannot be set.
࡛If communication initialization is needed after the setting, the system will reset automatically and
communication will be initialized.
Step 1 Step 2 Step 3 Description Default
Service Timer
Service Call
Number
16-digit phone number
Input: Blank, -, 0-9 -
Last Inspection Year, đͱϩ˵, Day -
Installation Date Year, đͱϩ˵, Day -
ůЇʪϩđͱʒʪ
Automatic Time
Enable/Disable Disable
Entry time to Exit time ťđߣߢࡤߢߢđߢߨࡤߢߢ
Indoor Zone Option
Cool/Heat Selection Cool & Heat/Heat only Cool & Heat
đɇࢩƊЇɵǮθʪʒ
Remote đɇ/Sub đɇ
Zone Selection Zone 1/Zone 2 Zone 1
Standard
Temperature Water Outlet/Indoor Water Outlet
Temperature Unit Celsius(°C):
ߣঙࢩߢߧঙࢩߢߣঙ ߢߧঙ
Temperature
Sensor Selection
Wired Remote Controller/
External Temperature
Sensor
Wired Remote Controller
Room Temperature
Calibration
Reference
Temperature -9 to 40°C -
Calibration Value -9 to 40°C 0°C
Indoor Zone Option Indoor Zone Status
Information
Central : ON/OFF -
Normal Power : ON/OFF -
đͱʒʪࡤ Heat/Cool/Auto -
DHW Power : ON/OFF -
U²Ǯđͱʒʪࡤ Economic/Standard/
Power/Forced -
Water Pump : ON/OFF -
BUH : ON/OFF -
BSH : ON/OFF -
Flow sensor : lpm -
Inverter Pump : 0% ~ 100% -
EEV Step : 0~2000Step -
Thermostat 1 : ON/OFF -
Thermostat 2 : ON/OFF -
DHW Thermostat : ON/OFF -
17
English
Installation/Service mode
Step 1 Step 2 Step 3 Description Default
Connection
Information
Number of
Connection 0 to 16 -
ǤʪиđɇϑϩʪθÃʒͱͱθ
Unit Address -
đɇϑϩʪθÃʒͱͱθȐͱʪ
Information
Serial No.: - -
Indoor Unit Eva In
Temp.(Teva_in) : Temperature -
Indoor Unit Eva Out
Temp.(Teva_out) : Temperature -
Indoor Unit PHE
IN(Tw1) : Temperature -
Indoor Unit PHE
OUT(Tw2) : Temperature -
DHW Tank Temp.
(Tt) : Temperature -
U²Ǯđͱʒʪࡤ Economic/Standard/
Power/Forced -
Device Information
đʀͱAͱʒʪࡤ đʀͱʀͱʒʪ -
Program Version : đͱʒ˙ʪʒʒɇϩʪ -
Touch Code : Touch IC code -
Program Version : đͱʒ˙ʪʒʒɇϩʪ -
Graphic Image : Graphic image code -
Program Version : đͱʒ˙ʪʒʒɇϩʪ -
Reset All Service
đͱʒʪϑ
Erase All Service
mode data --
Initialize a remote
controller --
ťͱиʪθđɇϑϩʪθ
Reset 1)* --
ODU K3 Reset - -
Field Setting Value
10** - -
20** - -
30** - -
40** - -
50** - -
Simple Setting - -
FSV Upload/
Download --
Installation/Service mode
18 English
Installation/Service mode
Installation/Service mode
Step 1 Step 2 Step 3 Description Default
Ɗʪ˙ࣛƟʪϑϩđͱʒʪ
Ɗʪ˙ࣛƟʪϑϩđͱʒʪ
Display
Water Inlet Temp.: Temperature -
Water Outlet Temp.: Temperature -
Backup Heater
Outlet Temp.: Temperature -
đу˝ǤɇЭʪĮЇϩʪϩ
Temp.: Temperature -
Tank Temp.: Temperature -
Indoor Ambient
Temp.: Temperature -
Indoor Ambient
Temp.(Zone 2) : Temperature -
Water Outlet Temp.
(Zone 1) : Temperature -
Water Outlet Temp.
(Zone 2) : Temperature -
Thermostat #1(Zone 1) :
Heat/Cool -
Thermostat
#2(Zone 2) : Heat/Cool -
Solar Panel ON/OFF -
Water Pump ON/OFF OFF
Booster Heater ON/OFF OFF
DHW Valve(3Way
Valve) ON/OFF OFF
Zone 1 Valve ON/OFF OFF
Backup Heater1 +
Water Pump ON/OFF OFF
Backup Heater 2 +
Water Pump ON/OFF OFF
Backup Boiler ON/OFF OFF
Zone 2 Valve ON/OFF OFF
đу˝ǤɇЭʪ ON/OFF OFF
19
English
Installation/Service mode
Step 1 Step 2 Step 3 Description Default
Indoor Unit Option
Address đɇɇʒʒθʪϑϑ 00 to 4F -
ŵđAɇʒʒθʪϑϑ 00 to FE -
Product Option 2)*
Refer to the installation
manual of the connected
indoor unit.
-
Installation Option
1 2)* -
Installation Option
2 2)* -
đAƸťͱθϩ đAƸɇʒʒθʪϑϑ 00 to 15 -
đAƸťͱθϩ A to F -
1)* ťͱиʪθđɇϑϩʪθŵʪϑʪϩ is a setting needed to supply optimized power to wired remote controller when multiple
indoor units are connected to wired remote controller in a group.
2)* The total option codes are 24 digits. You can set six digits at a time and it is distinguished by page number. Press
the OK button to move to the next page. [See the image C]
Installation/Service mode
20 English
Installation/Service mode
Installation/Service mode
NOTE
࡛Address is displayed in hexadecimal. Please refer to the following table.
Hexadecimal Decimal Hexadecimal Decimal Hexadecimal Decimal
00 0 10 16 20 32
01 1 11 17 21 33
02 2 12 18 22 34
03 3 13 19 23 35
04 4 14 20 24 36
05 5 15 21 25 37
06 6 16 22 26 38
07 7 17 23 27 39
08 8 18 24 28 40
09 9 19 25 29 41
0A 10 1A 26 2A 42
0B 11 1B 27 2B 43
0C 12 1C 28 2C 44
0D 13 1D 29 2D 45
0E 14 1E 30 2E 46
0F 15 1F 31 2F 47
Hexadecimal Decimal Hexadecimal Decimal
30 48 40 64
31 49 41 65
32 50 42 66
33 51 43 67
34 52 44 68
35 53 45 69
36 54 46 70
37 55 47 71
38 56 48 72
39 57 49 73
3A 58 4A 74
3B 59 4B 75
3C 60 4C 76
3D 61 4D 77
3E 62 4E 78
3F 63 4F 79
Other manuals for MWR-WW10JN
1
Table of contents
Other Samsung Remote Control manuals
Samsung
Samsung SolarCell SE-GL-2002861 User manual
Samsung
Samsung MWR-WE13N User manual
Samsung
Samsung MWR-WE13N User manual
Samsung
Samsung SRF1 Installation guide
Samsung
Samsung UE43MU6179UXZG User manual
Samsung
Samsung RMC-QTD1 User manual
Samsung
Samsung RMCSPM1AP1 User manual
Samsung
Samsung CU7172 User manual
Samsung
Samsung MWR-WG00JN User manual
Samsung
Samsung SolarCell Remote User manual
Samsung
Samsung SolarCell Remote User manual
Samsung
Samsung MWR-AH01 User manual
Samsung
Samsung MWR-SH00 User manual
Samsung
Samsung SolarCell Remote User manual
Samsung
Samsung VG-TM2360E User manual
Samsung
Samsung SolarCell Remote User manual
Samsung
Samsung NS052LHXEA User manual
Samsung
Samsung MR-EH01 User manual
Samsung
Samsung MWR-WW00 User manual
Samsung
Samsung MWR-TH01 User manual
Popular Remote Control manuals by other brands
Mitsubishi Electric
Mitsubishi Electric ecodan PAR-WT60R-E installation manual
Truth Hardware
Truth Hardware Sentry II WLS installation instructions
Cardin Elettronica
Cardin Elettronica FM Set up and user instructions
Hunter
Hunter 99123 user manual
Fusion
Fusion MS-RGBRC instructions
Danfoss
Danfoss Ikompact user manual
Wayne-Dalton
Wayne-Dalton 3150C Operating instructions and owner's manual
KFM
KFM 903A50 manual
Tresco
Tresco FREEDiM L-RGBCCT-RMT instructions
Kenwood
Kenwood RC100MR - Marine CD Receiver Remote Control... user guide
HomeMatic
HomeMatic HM-PB-2-WM55 Installation and operating manual
Monacor
Monacor MDQT-1/GB manual
