SATO KEIRYOKI SWPII-07 User manual

1
Instruction Manual
Penetration Probes Model SWPII-07, SWPII-08, SWPII-09 and SWPII-10
for SK-250WPII Series Waterproof Digital Thermometers
Thank you for purchasing the SWPII-07/-08/-09/-10 penetration type probes.
- These products are designed to measure temperature connecting with SK-250WPII Series
Waterproof Digital Thermometers. Do not use it for other purposes.
- Read this manual thoroughly before using. Keep the manual in a safe place for future reference
whenever necessary.
Installing Probes
Match both ▼and ▲marks of the plug of the
probe and the connector socket together and insert
the plug into the socket until a “click” is heard
How to Use
Press the POWER ON/OFF key on the main unit to start measurement. As for the details of the
usage, refer to the instruction manual for SK-250WPII Series Waterproof Digital Thermometers.
Cautions
Be sure to observe the following precautions in order to use this unit correctly.
- These probes are designed for SK-250WPII Series Waterproof Digital Thermometers. Do not
connect these probes with other thermometers.
- Be sure to use this probe within the specified measurement range. Using it outside the specified
measurement range will result in failure or damage.
- Take care not to burn when you measure high temperature. Keep it after temperature falls down
because the stainless steel stem and grip of the probe become hot.
- The penetration type probe has a sharp pointed tip so that it can penetrate into the measuring
object. Handle these probes with due care as this tip could cause accidental injuries.
- Never disassemble or modify this unit. Doing so may result in failure.
- Do not apply impact to it. Doing so may result in failure.
- For accurate measurement, wash out a stain with water after measurement. Wipe any moisture
off with a dry cloth.
- Do not use this unit in water.
mark

2
How to handle the sensor cord
Do not forcibly pull, bend, or bundle the sensor cord. Placing a heavy object on the sensor cord,
heating or scratching the cord may also damage it. Never do the following use.
1. Do not insert the sensing stem into 2. Do not bundle the sensor cord with tape on
object with pressing the sensor cord of to the grip.
the grip with palm.
Specifications
Cat. No.
8077-10
8077-20
8077-30
8077-40
Model Name
SWPII-07
SWPII-08
SWPII-09
SWPII-10
Measuring range
-40 to 250˚C
-15 to 250˚C
-40 to 250˚C
-15 to 250˚C
Accuracy
at -40 to -16˚C
±2˚C
-----------
±2˚C
-----------
at -15 to -10˚C
±2˚C
±1˚C
±2˚C
±1˚C
at -9.9 to -0.1˚C
±1˚C
at 0 to 40.0˚C
±0.6˚C
at 40.1 to 105.0˚C
±0.7˚C
at 105.1 to 145.0˚C
±1˚C
at 145.1 to 250.0˚C
±2˚C
Sensor
Thermistor
Waterproof construction
IPX7
Dimensions
Sensing stem
Ø3 x 100mm(L)
Ø3 x 400mm(L)
Ø3 x 200mm(L)
Ø2 x 150mm(L)
Stem end
Point end
Round end
Point end
Point end
Grip
Ø15 x 110mm(L)
Cord length
about 1m
Materials
Sensing stem
SUS304
Grip
SUS303
Weights
about 140g
about 145g
about 143g
about 139g
Parts and Names
3-4, Kanda-kajicho, Chiyoda-ku, Tokyo 101-0045 Japan
URL: http://www.sksato.co.jp/english/
grip
sensor cord
Sensing part
Grip
Sensor cord