Savic Geneva User manual

assembly instructions
Geneva
#petslovesavic

A 1 cage
B 2 side panels
C 1 plastic tank
D 1 cage platform
E 1 ladder
F 1 exercise wheel
G 1 feeding bowl
H 1 waterbottle + holder
I 1 connector for side panels
J 4 non-slip feet
Assemble the 4 non-slip feet below the connector.
1
Take 1 of the 2 side panels and attach to the connector.
2
click
Click now the wire cage part into the side panel. Make sure it is well fixed.
Take now the remaining side panel and assemble this to the cage and the
connector.
3
instruction video
B
A
C
D
I
J
G
H
E
F
Check list
Before you start assembling your cage, please check if you have all the components.
If any part is missing or damaged, do not use your cage.
click
click

6
Fill the bottle completely with water and attach to the side ofthe
cage so your hamster can easily reach it from the floor and also fill
the feeding bowl. Attach the exercise wheel to the cage part and the
ladder to the cage floor.
7
Take the plastic tank of your Geneva and fill half way with a layer of
wood flakes. Your Geneva is now ready for your hamster.
5
Place the plastic tank below the cage part.
4
Install the cage floor.
ATTENTION
To avoid leakage,
always fill bottle 100%.
Rince spout with hot water
before first use.
www.savic.be
Ringlaan 10 • B-8501 Heule • Belgium
Tel. [phone] • Fax [phone]
[e-mail]