SCANCLIMBER SC1300 User manual

GENERAL INFORMATION
1
SC1300 Pos 1
V25A_11.10
1. GENERAL INFORMATION
1. GENERAL INFORMATION .................................................3
1.1. GENERAL DESCRIPTION ...................................................3
1.2. BASIC DELIVERY SCOPE OF SC1300 ON WHEEL
CHASSIS WITH 10.5 M PLATFORM ...................................8
1.3. WARRANTY TERMS..........................................................11
Sales, Service and After sales
Plettac Ltd
Tel.: [phone]
[email protected]
www.plettac.ua

GENERAL INFORMATION
2
V25A_11.10
SC1300 Pos 1

GENERAL INFORMATION
3
SC1300 Pos 1
V25A_11.10
1. GENERAL INFORMATION
SCANCLIMBER SC1300 can be used
either as a single or twin mast climbing
work platform. It is designed to position
men with their tools and other necessary
equipment and material for working in
high heights.
SCANCLIMBER SC1300 can be used for
all kind of work: assembly, n ishing, clad-
ding and painting of buildings, facade
work and industrial objects. It can be in-
stalled indoors as well as outdoors.
The platform is operated up and down
with push-buttons on pendant control
box. On the station there is also an emer-
gency stop push-button.
SCANCLIMBER SC1300 consists of chas-
sis, mast and platform sections which are
connected to the lifting frame.
1.1. GENERAL DESCRIPTION
13-0994-1-1C
Drawing 1.1. SC1300 on wheel chassis.
PLATFORM SECTION
RAILING SECTION
WITH GATE AND
LADDER
TOW BAR
LEVELLING JACK
MAST TOP CAP
 LIFTING FRAME
MAST
CHASSIS DRIVE UNIT
OUTRIGGER
WHEEL CHASSIS











GENERAL INFORMATION
4
V25A_11.10
SC1300 Pos 1
Wheel chassis consists of a welded frame
with four wheels and four telescopic
outriggers which can be turned out with
levelling jacks. They are used for setting
the mast in vertical position. Chassis drive
unit is available for the wheel chassis to
make the travel at worksite easier.
Towing of the SCANCLIMBER SC1300 at
worksite is possible with a tow bar.
Mast consists of lat-
tice structure mast sec-
tions which are assem-
bled one on top of the
other and connected
with the mast bolt sets.
On one side of the
mast section there is
the rack for platform
drive
Top cap is bolted on
the top of the mast. It
works as a mechanical
stopping device.
Top cap is also used
as a hoist point when
lifting mast sections or
whole SCANCLIMBER
SC1300.
The maximum lifting
capacity of the top
cap is 5500 kg.
The freestanding height of mast, assem-
bled onto the wheel chassis, is limited. By
using the anchoring system it is possible
to reach the maximum height of 100 m.
The minichassis has been designed for
the narrow and close worksites.
!! IT IS NOT AL-
LOWED TO TOW
SC1300 ON PU-
BLIC STREETS !!
Drawing 1.2.
SC1300 single on minichassis.
!
WALL ANCHOR
(VERTICALLY
ADJUSTABLE)
LEVELLING
JACK
MINICHASIS

GENERAL INFORMATION
5
SC1300 Pos 1
V25A_11.10
By connecting two SC1300 SINGLES to-
gether with platform hinged joints you
will get a SC1300 TWIN with wider work-
ing area.
Drawing 1.4. SC1300 twin on wheel chassis.
30-0994-85-1
30-0195-105-1
Drawing 1.3. SC1300 twin on minichassis.
KU
KUVAKU

GENERAL INFORMATION
6
V25A_11.10
SC1300 Pos 1
FREESTANDING HEIGHT 20 M
Drawing 1.5. SC1300 single
with dimensions. All outriggers
are turned out and extended.
Drawing 1.6. SC1300
single with dimensions. All outriggers
are extended, but turned out on mast
side only. 13-0994-2-1C
FREESTANDING HEIGHT 15 M
13-0994-2-2C
➤
➤
MAX. 20000

GENERAL INFORMATION
7
SC1300 Pos 1
V25A_11.10
Drawing 1.7. SC1300 single on minichassis. Minichassis with dimensions.
13-0994-102-1C
1591 mm /5’3’’
1350 mm /4’5’’
834 mm/2’9’’
1550 mm /5’1’’
1791 mm /5’11’’

GENERAL INFORMATION
8
V25A_11.10
SC1300 Pos 1
item description pcs
1. Wheel chassis ............................................................................................ 1
2. Telescopic outrigger with levelling jack.................................................. 4
3. Centre jack (when mast height over 30 m) ........................................... 1
4. Ground plate ......................................................................................... 4+1
5. Tow bar ....................................................................................................... 1
6. Chassis drive unit........................................................................................ 1
7. Cable tray .................................................................................................. 1
8. Lifting frame................................................................................................ 1
9. Mast section .............................................................................................. x)
10. Mast screw set ............4 pcs / mast section
11. Mast top cap (with screw set 4 pcs) ....................................................... 1
12. Mast guard................................................................................................. 1
13. Mast guard................................................................................................. 1
14. Mast guard................................................................................................. 1
15. Counter part of limit switch (top and bottom position) ....................... 2
16. Signalling bar.............................................................................................. 2
17. Fastening piece (for items 15/16) ........................................................... 5
18. Platform section (1,68 x1,6 m) .................................................................. 6
19. Platform screw set ................................................................................... 36
20. Railing (1,0 m)............................................................................................. 1
21. Railing (1,6 m)........................................................................................... 12
22. Railing with gate (1,6 m)........................................................................... 2
23. Railing coupler 2 (corner piece) with fastening screws ....................... 8
24. Railing coupler 1 (straight) with fastening screws................................ 10
25.R. Railing coupler 3 (sidemounting) with fastening screws....................... 2
25.L. Railing coupler 4 (sidemounting) with fastening screws....................... 2
26. Hex-socket cap-screw ............................................................................ 30
27. Ladder......................................................................................................... 2
28. Side platform support................................................................................ 2
29. Side platform screw set............................................................................. 4
30. Anchor set ................................................................................................. x)
31. Top anchor pipes....................................................................................... 2
32. Special tool (for platforms assembly)...................................................... 1
33. Special tool (for jacks) ............................................................................. 1
34. Special key (for guiding rollers)................................................................ 1
35. Special key (for safety brake) ................................................................. 1
36. Pendant control for drive of the chassis and horizontal and vertical
drive of the platform ................................................................................ 1
37. Pendant control for safety brake test (single/twin unit) ....................... 1
x) Depending on the mast height
1.2. BASIC DELIVERY SCOPE OF SC1300 ON WHEEL CHASSIS
WITH 10.5 M PLATFORM (SEE PICTURE NO. 13-0994-1)

GENERAL INFORMATION
9
SC1300 Pos 1
V25A_11.10
Drawing 1.8.
SC1300 single on wheel chassis with 10,5 m platform - basic delivery scope.
36
37
13-0994-1

GENERAL INFORMATION
10
V25A_11.10
SC1300 Pos 1
Parts and units, quantity of which de-
pends on the mast height are specied
in the following table.
Double the quantitis for twin.
TABLE OF PART QUANTITIES, WHICH DEPEND ON HOISTING HEIGHT
No. Part Drawing Hoisting height/m
or spare
20 30 40 50 60 70 80 90 100
Quantity/pcs
1. Mast section PG100323 16 24 32 40 48 56 64 72 80x)
(32 48 64 80 96 112 128 144 160)
1.1. Mast bolt set 10005932 64 96 128 160 192 224 256 288 320
2. Wall anchors PG109128 1 2 3 4 5 6 6 7 8
Min. quantity of (2 4 6 8 10 12 12 14 16)
anchors for mast on
wheel chassis
Min. quantity of anchors 3 4 5 6 7 8 8 9 10
for mast on minichassis (6 8 10 12 14 16 16 18 20)
3. Cables in metres m 28 38 48 58 68 78 88 98 108
5 x 6 mm2 (56 76 96 116 136 156 176 196 216)
x) Basic unit includes one assembled mast section.
Part No