Schlage S-7100 User manual

Product composition and components Name and function of each part
1. Front Ass`y
2. Back Ass`y
Name Product speci󽗉cation Remark
① Front Ass`y 88mm(W) X 385mm(H) X 40mm(D) Including rubber pad
② Back Ass`y 88mm(W) X 375mm(H) X 44mm(D)
③ Back bracket 81mm(W) X 319mm(H) X 8.7mm(D)
④ Mortise lock 105.4mm(W) X 240mm(H) X 24mm(D)
⑤ Strike 24mm(W) X 240mm(H) X 4.5mm(D)
⑥ Card key ISO card, Tag key
⑦ Mechanical key 3 EA
⑧ Handle shaft 70.5mm(W) X 8mm(H) X 8mm(D) 40~50mm Door
⑨ Handle shaft(M) 101.7mm(W) X 8mm(H) X 8mm(D) 70~90mm Door
⑩ Key Shaft 1 EA
⑪ Handle shaft stop-ring 2 EA
⑫ Battery 6V (1.5V 'AA' Size LR6 Alkaline, 4ea)
⑬ Screws 1 set
⑭ User manual English Including warranty
form
⑮ Installation template
Using for making hole at the door
⑯ Communication pack
Communication pack
Optional
⑰
Remote key
Remote key Optional
※
Installation condition Door thickness 40~80mm
①
⑥
⑧
⑫
⑨
⑬
Screws
⑭
⑮
User
manual
Installation
template
Remote key Communication pack
⑪
Optional parts
⑯ ⑰
Do not disassemble or alter the lock. Disassembling the
door lock may damage the product. Damages to the
product caused by unauthorized persons may void the
warranty.
If the product generates harmful gases and smoke.
Please remove the batteries immediately from the
product, if you do not take this step immediately, the
product may suffer severe damage.
Please keep the product away from water or any liquids.
If the product is exposed to water or liquids, please wipe
the moisture off with a soft cloth. If moisture or foreign
materials penetrate the product, remove the batteries
immediately.
Please check the batteries every 6 months for leaks/
cleanliness. If leakage is discovered, please wipe out
with a dry cloth and replace with new batteries. In case
of exposure to leakage, wash affected skin area with
soap and water immediately.
Do not clean the product with flammable materials such
as alcohol, benzene or thinners. Such materials may
damage the surface of the lock or cause a fire.
Batteries should not be exposed directly to heat source 
or submerged in water, because they may leak or
explode, resulting in severe damage. Do not use
damaged batteries.
Do not allow the battery electrodes to contact metals
such as keys, as the battery may overheat, causing
explosion or severe damage.
Please do not close the door with the deadbolt in the
locked position. It may damage the product or cause a
malfunction.
Do not force to pull the front cover. It may damage the
product or cause a malfunction.
Do not mix old and new batteries, or use different types
of batteries. The battery life is getting shorter and it may
cause leaks or explosion.
Please do not hang the heavy things or bag, etc on
the handle. It is may damage the handle or cause a
malfunction.
Safety precautions Product features
󾖴󾖴
󾖸󾖺󾖴󾖴󾖺󾖴󾖴󾖺󾖴󾖴󾖹
󾖻󾖴󾖴󾖴
The product can be installed in a left or right handed configuration.
󾖴󾖽󾖴
ㆍNormal mode: easy to use for normal user.
ㆍSafety mode: high security mode with manger function added,
provides individual register and delete function which is not
provided in normal mode.
󾖴󾖴󾖴
If a high temperature is detected that may cause a fire, the alarm
will ping sound for safety reasons. ( Working temperature : -15~55℃,
Sensor working temperature(high) : 60℃±10℃)
󾖴󾖴󾖴
When you enter your home with other people, you may not want to
show PIN code to them. In this case, you may press any numbers
randomly without limitation and then enter your PIN code at the
end.
󾖴󾖴󾖴
After multiple incorrect attempted entries an alarm will sound and
all the functions of the lock will be suspended for three minutes. The
alarm activated after three incorrect PIN/card entries.
󾖴󾖴
When the door is opened by force an alarm will sound.
󾖴󾖴
If users do not open the door after unlocking the device it will lock
itself automatically.
󾖴󾖴
When double lock function is activated, the door cannot be opened
from the outside, even with the registered card, PIN code or
fingerprint. Override key can still be used.
󾖴󾖴󾖴
Door will not emit any sound when mute is activated.
Factory setting
Item Setting Status Ref.page
Auto/Manual lock mode [Auto lock] 8
Language (English/Chinese) English 5
Normal mode / Security Mode Normal mode 9-10
Voice guide volume (1~3 level) 3 level [Maximum] 7
Beep sound level (1~8 level) 8 level 7
Factory setting PIN code 123456 -
 Mute function
 Double lock function
 Wireless interlock
 Battery replacement indicator
 Trespass alarm function
Indicate operation status and
checking battery capacity.
Remaining battery 20%
Remaining battery 50%
Remaining battery 80%
Status indicator
Window icon
Handle
You can open the door by pushing or
pulling it
󾖴
Touch the registered fingerprint on
the sensor to unlock the door
󾖴󾖴
󾖴󾖽󾖴󾖴
Indicate lock / unlock status
󾖴󾖴󾖴
Touch the registered card key to
unlock the door
Override key
Unlock the door with override key manually
󾖴
󾖴󾖴 󾖴󾖴󾖴
󾖴
When battery does not operate, 
product may be operated and 
unlocked by contacting a 9V battery 
on terminal located outside

You can open the door by pushing
or pulling it
󾖴
Push up to open the battery cover
󾖴
󾗁
󾖴 󾗂󾖴Button
Button to lock the door manually
󾗁
󾖴 󾗂󾖴Button
Button to set double locking mode
󾖴
󾖴󾖴
[N], [S], [ ] Button
⑦
ISO
CARD
Tag
key
⑩
⑤
① ④③②
Notice
Please read this manual before installation and
operation.
󾖻
󾖴

: [N] button
C
: PIN code : Trespass alarm
: [S] button : Card key : Unlock
: [ ] button : 9V alkaline battery(6LF22) : Lock
#
: [#] button
UC
: User code : Fingerprint
: Touch the front
pad
MC : Manager code
: Smartphone
application
: [Communication
function] button
RC
: Registration new code : Authentication
code
RAN
DOM
CODE
: Random code : Open button on
application
※ Normal mode : [N] button / Safety mode : [S] button
Description shortcut icons How to use random security coding function
Usage
RAN
DOM
CODE C
Auto lock function / Auto relocking system
When the door is closed, it will be locked
automatically.
If the door is not opened within 7 seconds after
input PIN code or Card key it will be relocked
automatically to protect user`s property.
1. Auto lock function 2. Auto relocking system
ㆍ Normal mode : ideal for new users or low security environments
ㆍ Safety mode : higher security level via use of a manager PIN code. Provides individual registration and deletion
function
: [N] button : [S] button : Card key : Fingerprint
UC : User code MC : Manager code RC :
Registration n ew code
How to change from normal mode to safety mode
12345678910
Safety mode
3"Sec UC #MC #MC #
How to change from safety mode to normal mode
Normal mode
3"Sec MC #UC #UC #
˙ Please con󽗉rm that the door is properly closed. Double locking is available when the door is closed.
˙ Even in [Double locking] mode, it is available to open the door from inside by push or pull down the
handle.
˙ Push or pull down the handle from the inside will automatically turn o󽗈 Double locking mode.
˙ If the sound is set to mute only indicating lamp is blinking.
Note
How to set double locking function
1. [Double locking] Set up 2. [Double locking] Cancel
How to unlock / lock from outside
How to unlock from outside
PIN code
C
Card key Fingerprint
How to unlock from outside without disturbing others (Mute function)
PIN code
3"Sec 
OFF C
Card key
3"Sec 
OFF
How to lock [Auto lock / Manual lock] from outside
Auto lock ※ If the door is not closed correctly, warning sound will go o󽗈.
Please check and con󽗉rm the door closing status.
Manual lock
0
How to set auto lock / manual lock
Auto lock
#C or #8
5
Manual lock
6
How to replace batteries
If battery lamp is blinking RED and alarm sounds, open battery cover and replace all batteries,
6V(1.5V "AA" size LR6 Alkaline)
How to change Normal mode / Safety mode
ㆍPIN code: 10 EA (6-12 digits) / Card key: 50 EA / Fingerprint : 100 EA
Normal mode
12345678910
REG.
PIN code
1 4 RC ㆍㆍㆍ
Card key
1 5 ㆍㆍㆍ
Fingerprint
1 6
3 times
ㆍㆍㆍ
DEL.
All 
Card key
2 5
All 
Fingerprint
2 6
※ Repeat highlighted part of diagram above for continuous register.
※ Keep the door open while you register PIN code / Card keys to prevent yourself from
accidentally getting locked out.
ㆍPIN code: 10 EA (6-12 digits) / Card key: 50 EA / Fingerprint : 100 EA
Safety mode
1 2 3 4 5 6 7 8 9 10 11 12
REG.
PIN code
1 4 MC
or
#RC
Card key
1 5 MC
or
#
Card
Registration
Number(2digits)
#
Finger
print
1 6 MC
or
#
Fingerprint
Registration 
Number(3 digits)
#
3 times
DEL.
All 
Card key
2 5 MC
or
#
Individual
Card key
3 5 MC
or
#
Card
Registration
Number(2digits)
#
All 
Fingerprint
2 6 MC
or
#
Individual
Fingerprint
3 6 MC
or
#
Fingerprint
Registration 
Number(3 digits)
#
Safety mode (Manager)
Change Manager
code
8 4 MC
or
#RC #RC #
REG.
Manager
Card key
8 5 MC
or
# #
DEL.
All
manager 
Card key
8 6 MC
or
#5
※ Repeat highlighted part for continuous register or delete.
Normal mode
Safety mode
Warning : Please do not forget manager PIN code.
If you forget this number, please contact to your local agency.
Keep the door open while you register PIN code / Card keys to prevent
yourself from accidentally getting locked out.
Installing communication / Mobile Access pack
1. Open the battery cover then remove all batteries.
2. Insert the communication pack into the slot.
3.  Insert batteries after confirming the direction of 
and .
4. It will sound when the device is installed correctly.
Caution
Please fit the socket in the
correct location.
How to lock from inside
Please push or pull the
handle hard enough
from inside.
Caution
In push handle type, please do not put your
finger between handle and door lock body.
Finger can be jammed or hurt when you
try to open the door.
Additional function
How to control voice guide volume
Min. volume
#C or #1
1
Mid. volume 2
Max. volume 3
Guest PIN code (Temporary use)
REG. #C or #2RC #RC #
How to control operation volume
Vol. up
#C or #3
9
Vol. down 7
Status checking guide
Voice guide #C or #4
Check battery capacity
Checking 
the battery #C or #5
Warning function against Illegal entry or hacking
Operate
Wrong 󾖴󾖴  / unregistered 󾖴
󾖴 / unregistered 󾖴󽗉󾖴
Warning alarm function against trespass by force
PIN code CCard key Fingerprint
Press 
[Double locking]/
[Manual locking]
Button for 3 second
under the door closing.
1. Press 
[Double locking]/
[Manual locking]
Button.
2. Push or pull the
handle.
or
Please push or
pull the handle
hard enough
from inside.
: [Communication function] button C : PIN code 
: Smartphone application : Authentication code
: Open button on application
Smartphone
REG. 1 C # #
ALL DEL.
2 C #
Send family key
Send
#C#6#
※ Please follow detailed instructions given on the smartphone application for highlighted parts.
How to unlock with mobile key (using smartphone)
Open in safe mode
Safe mode ※ Click [ ] open button on smartphone application
to unlock the door
How to set up smartphone to use mobile key
1. Download Schlage Access application on your smartphone from the app store.
2. Register and log into the app.
3. Follow instructions from the app installation guide to register the door lock.
4. When you unlock the door lock using the app for the 󽗉rst time, press [ ] open button
on the app, followed by 1 on door lock’s numeric pad to check connection.
Caution
󾖴󾖴󾖴󾖷󾖴󾖴󾖴󾖴󾖴󾖴󾖴󾖴󾖴
˙ Make sure smartphone power is “on”.
˙ Make sure you’re logged into the app, and it’s active.
˙ Make sure your smartphone’s Bluetooth function is on
※ If you activate or deactivate the app and/or Bluetooth function, the app disconnects from the
lock and deactivates the mobile key. 
If you wish to reuse the mobile key, turn on the app and the Bluetooth function, press [ ]
open button on the app, followed by 1 on door lock's numeric pad to reconnect and activate
the mobile key.
※ You must keep the app “on” and Bluetooth “on” at all times to use the mobile key without
reconnection.
Mobile access Set-up and use
How to apply external power in the emergency
PIN code
C
Card key
3"sec
How to use [Safety switch]
The safety handle is
activated. (Red)
The safety handle is
deactivated. (green)
Operation of the handle inside is restricted for preventing outside intrusion.
Rev.00
© 2019 Allegion