Schlage S-7100 User manual

Product composition and components Name and function of each part
󾖼󾖴󾖴
Name Product speci󽗉cation Remark
① Front Ass`y 88mm(W) X 385mm(H) X 40mm(D) Including rubber pad
② Back Ass`y 88mm(W) X 375mm(H) X 44mm(D)
③ Back bracket 81mm(W) X 319mm(H) X 8.7mm(D)
④ Mortise lock 105.4mm(W) X 240mm(H) X 24mm(D)
⑤ Strike 24mm(W) X 240mm(H) X 4.5mm(D)
⑥ Card key ISO card, Tag key
⑦ Mechanical key 3 EA
⑧ Handle shaft 70.5mm(W) X 8mm(H) X 8mm(D) 40~50mm Door
⑨ Handle shaft(M) 101.7mm(W) X 8mm(H) X 8mm(D) 70~90mm Door
⑩ Key Shaft 1 EA
⑪ Handle shaft stop-ring 2 EA
⑫ Battery 6V (1.5V 'AA' Size LR6 Alkaline, 4ea)
⑬ Screws 1 set
⑭ User manual English Including warranty
form
⑮ Installation template
Using for making hole at the door
⑯ Communication pack
Communication pack
Optional
⑰
Remote key
Remote key Optional
※
Installation condition Door thickness 40~80mm
①
⑥
⑧
⑫
⑨
⑬
Screws
⑭
⑮
User
manual
Installation
template
Remote key Communication pack
⑪
Optional parts
⑯ ⑰
Do not disassemble or alter the lock. Disassembling the
door lock may damage the product. Damages to the
product caused by unauthorized persons may void the
warranty.
If the product generates harmful gases and smoke.
Please remove the batteries immediately from the
product, if you do not take this step immediately, the
product may suffer severe damage.
Please keep the product away from water or any liquids.
If the product is exposed to water or liquids, please wipe
the moisture off with a soft cloth. If moisture or foreign
materials penetrate the product, remove the batteries
immediately.
Please check the batteries every 6 months for leaks/
cleanliness. If leakage is discovered, please wipe out
with a dry cloth and replace with new batteries. In case
of exposure to leakage, wash affected skin area with
soap and water immediately.
Do not clean the product with flammable materials such
as alcohol, benzene or thinners. Such materials may
damage the surface of the lock or cause a fire.
Batteries should not be exposed directly to heat source 
or submerged in water, because they may leak or
explode, resulting in severe damage. Do not use
damaged batteries.
Do not allow the battery electrodes to contact metals
such as keys, as the battery may overheat, causing
explosion or severe damage.
Please do not close the door with the deadbolt in the
locked position. It may damage the product or cause a
malfunction.
Do not force to pull the front cover. It may damage the
product or cause a malfunction.
Do not mix old and new batteries, or use different types
of batteries. The battery life is getting shorter and it may
cause leaks or explosion.
Please do not hang the heavy things or bag, etc on
the handle. It is may damage the handle or cause a
malfunction.
Safety precautions Product features
󾘥󾘥
󾘩󾘫󾘥󾘥󾘫󾘥󾘥󾘫󾘥󾘥󾘪
󾘬󾘥󾘥󾘥
The product can be installed in a left or right handed configuration.
󾘥󾘮󾘥
ㆍNormal mode: easy to use for normal user.
ㆍSafety mode: high security mode with manger function added,
provides individual register and delete function which is not
provided in normal mode.
󾘥󾘥󾘥
If a high temperature is detected that may cause a fire, the alarm
will ping sound for safety reasons. ( Working temperature : -15~55℃,
Sensor working temperature(high) : 60℃±10℃)
󾘥󾘥󾘥
When you enter your home with other people, you may not want to
show PIN code to them. In this case, you may press any numbers
randomly without limitation and then enter your PIN code at the
end.
󾘥󾘥󾘥
After multiple incorrect attempted entries an alarm will sound and
all the functions of the lock will be suspended for three minutes. The
alarm activated after three incorrect PIN/card entries.
󾘥󾘥
When the door is opened by force an alarm will sound.
󾘥󾘥
If users do not open the door after unlocking the device it will lock
itself automatically.
󾘥󾘥
When double lock function is activated, the door cannot be opened
from the outside, even with the registered card, PIN code or
fingerprint. Override key can still be used.
󾘥󾘥󾘥
Door will not emit any sound when mute is activated.
Factory setting
Item Setting Status Ref.page
Auto/Manual lock mode [Auto lock] 9
Normal mode / Safety Mode Normal mode 10-11
Voice guide volume (1~3 level) 3 level [Maximum] 8
Beep sound level (1~8 level) 8 level 8
Factory setting PIN code 123456 -
 Mute function
 Double lock function
 Wireless interlock
 Battery replacement indicator
 Trespass alarm function
Indicate operation status and
checking battery capacity.
Remaining battery 20%
Remaining battery 50%
Remaining battery 80%
󾖴󾖴
󾖴
󾖴
Handle
You can open the door by pushing
or pulling it
󾘥
Touch the registered fingerprint
on the sensor to unlock the door
󾘥󾘥
󾘥󾘮󾘥󾘥
Indicate lock / unlock status
󾘥󾘥󾘥
Touch the registered card key to
unlock the door
󾘥
Unlock the door with override key
manually
󾘥󾘥
⑦




⑩
⑤
① ④③②
Notice
Please read this manual before installation and
operation.
S-7100
USER MANUAL
󾘥󾘥
󾘥󾘥
When battery does not operate,
product may be operated and
unlocked by contacting a 9V
battery on terminal located
outside
How to apply external power in the emergency
PIN code
C
Card key
󾘥

: [N] button
C
: PIN code : Trespass alarm
: [S] button : Card key : Unlock
: [ ] button : 9V alkaline battery(6LF22) : Lock
#
: [#] button
UC
: User code : Fingerprint
: Touch the front
pad
MC : Manager code
: [Communication
function] button
RC
: Registration new code
RAN
DOM
CODE
: Random code
※ Normal mode : [N] button / Safety mode : [S] button
Description shortcut icons How to use random security coding function
Usage
RAN
DOM
CODE C
How to unlock / lock from outside
󾖴󾖴󾖴󾖴
󾖴󾖴󾖴󾖴
PIN code
C
Card key Fingerprint
󾖴󾖴󾖴󾖴
󾖴󾖴󾖴󾖴󾖴󾖴󾖴󾖴󾖸󾖴󾖹󾖴
PIN code
3"Sec 
OFF C
Card key
3"Sec 
OFF
󾖴󾖴󾖴󾖴
󾖴󾖴󾖴󾗁󾖴󾖴󾖽󾖴󾖴󾗂󾖴󾖴
Auto lock ※ If the door is not closed correctly, warning sound will go o󽗈.
Please check and con󽗉rm the door closing status.
Manual lock
0
󾖴󾖴󾖴󾖴
󾖴󾖴󾖴󾖴󾖴󾖽󾖴󾖴󾖴
Auto lock
#C or #8
5
Manual lock
6
How to replace batteries
If battery lamp is blinking RED and alarm sounds, open battery cover and replace all batteries,
6V(1.5V "AA" size LR6 Alkaline)
ㆍPIN code: 10 EA (6-12 digits) / Card key: 50 EA / Fingerprint : 100 EA
󾖴
12345678910
REG.
PIN code
1 4 RC ㆍㆍㆍ
Card key
1 5 ㆍㆍㆍ
Fingerprint
1 6
3 times
ㆍㆍㆍ
DEL.
All 
Card key
2 5
All 
Fingerprint
2 6
※ Repeat highlighted part of diagram above for continuous register.
※ Keep the door open while you register PIN code / Card keys to prevent yourself from
accidentally getting locked out.
ㆍPIN code: 10 EA (6-12 digits) / Card key: 50 EA / Fingerprint : 100 EA
󾖴󾖴󾖴󾖴󾖴
1 2 3 4 5 6 7 8 9 10 11 12
REG.
PIN code
1 4 MC
or
#RC
Card key
1 5 MC
or
#
Card
Registration
Number(2digits)
#
Finger
print
1 6 MC
or
#
Fingerprint
Registration 
Number(3 digits)
#
3 times
DEL.
All 
Card key
2 5 MC
or
#
Individual
Card key
3 5 MC
or
#
Card
Registration
Number(2digits)
#
All 
Fingerprint
2 6 MC
or
#
Individual
Fingerprint
3 6 MC
or
#
Fingerprint
Registration 
Number(3 digits)
#
󾖴󾖴󾖴󾖴󾖴󾖴󾖸󾖹
Change Manager
code
8 4 MC
or
#RC #RC #
REG.
Manager
Card key
8 5 MC
or
# #
DEL.
All
manager 
Card key
8 6 MC
or
#5
※ Repeat highlighted part for continuous register or delete.
Normal mode
Safety mode
󾖴󾖾 Please do not forget manager PIN code.
If you forget this number, please contact to your local agency.
Keep the door open while you register PIN code / Card keys to prevent
yourself from accidentally getting locked out.
How to lock from inside
Please push or pull the
handle hard enough
from inside.

󾖴󾖴󾖴󾖺󾖴󾖴󾖴󾖴󾖴󾖴
󾖴󾖴󾖴󾖴󾖴󾖴󾖼
󾖴󾖴󾖴󾖴󾖴󾖴󾖴󾖴
󾖴󾖴󾖴󾖴󾖼
Additional function
󾖴󾖴󾖴󾖴󾖴󾖴󾖴󾖴󾖴
Min. volume
#C or #1
1
Mid. volume 2
Max. volume 3
󾖴󾖴󾖴󾖴󾖴󾖴󾖴󾖸󾖴󾖹
REG. #C or #2RC #RC #
󾖴󾖴󾖴󾖴󾖴󾖴󾖴󾖴
Vol. up
#C or #3
9
Vol. down 7
󾖴󾖴󾖴󾖴󾖴󾖴
Voice guide #C or #4
󾖴󾖴󾖴󾖴󾖴󾖴
Checking 
the battery #C or #5
󾖴󾖴󾖴󾖴󾖴󾖴󾖴󾖴󾖴󾖴
Operate
Wrong 󾘥󾘥  / unregistered 󾘥
󾘥 / unregistered 󾘥󽘀󾘥
󾖴󾖴󾖴󾖴󾖴󾖴󾖴󾖴󾖴󾖴
PIN code CCard key Fingerprint
󾖴󾖴󾖴󾖴󾖴󾖴󾖽󾖴󾖴󾖴
REG. Remote key
3"Sec 1C
or
#
or
DEL. All
remote key
3"Sec 2C
or
#
󾖴󾖴󾖴󾖴󾖴󾖴󾖽󾖴󾖴󾖴󾖴
Unlock Lock
※ Repeat highlighted part for continuous registration.
※ 1 EA battery is equipped.
※ To replace battery, open the back cover.
Wireless communication device installation
Communication pack / Remote key
(optional)
Using the Schlage Base (optional)
※ Communication packs(Mobile Access) must be purchased separately.
Rev.02
1. Open the battery cover on the lock and remove the batteries.
2. Plug in the wireless communication device.
3. Insert the batteries back into the lock.
4. Audible melody will sound if successful.
˙ Please insert the device in the
correct position.
Note
How to register remote key & to unlock or lock
1.5v ‘AAA’ size
alkaline
battery 1 EA
Indication lamp
[Lock] button
[Unlock] button
ㆍRemote key : 5 entries
: [Communication function] button
: Remote unlock : Remote lock
C
: PIN code : Card / Fob
Connecting with the mobile app
Disconnecting the app from the door lock
1. Install the Schlage Base via the APP Store or Google Play.
2. Activate the app (new user must register account first) and press the “ ” icon at
the top of the screen and select a door lock from the list.
3. Connect the door lock by following the guide provided in the app.
󾘥󾘥󾘯󾘥
Press and hold the [ ] button for 3 seconds.
Then, press 1 on the keypad and enter the passcode followed by the [] button.
1. Press and hold the [] button for 3 seconds.
2. Then, press 2 on the keypad and enter the passcode followed by the [] button.
ㆍ Normal mode : ideal for new users or low security environments
ㆍ Safety mode : higher security level via use of a manager PIN code. Provides individual registration and deletion
function
: [N] button : [S] button : Card key : Fingerprint
UC : User code MC : Manager code RC :
Registration n ew code
󾖴󾖴󾖴󾖴 󾖴󾖴󾖴󾖴󾖴󾖴󾖴󾖴
12345678910
Safety mode
3"Sec UC #MC #MC #
󾖴󾖴󾖴󾖴 󾖴󾖴󾖴󾖴󾖴󾖴󾖴󾖴
Normal mode
3"Sec MC #UC #UC #
˙ Please con󽗉rm that the door is properly closed. Double locking is available when the door is closed.
˙ Even in [Double locking] mode, it is available to open the door from inside by push or pull down the
handle.
˙ Push or pull down the handle from the inside will automatically turn o󽗈 Double locking mode.
˙ If the sound is set to mute only indicating lamp is blinking.
Note
How to set double locking function
1. [Double locking] Set up 2. [Double locking] Cancel
How to change Normal mode / Safety mode
Press 
[Double locking]/
[Manual locking]
Button for 3 second
under the door closing.
1. Press 
[Double locking]/
[Manual locking]
Button.
2. Push or pull the
handle.
or
Please push or
pull the handle
hard enough
from inside.
3"sec
󾖼󾖴󾖴

You can open the door by
pushing or pulling it
󾘥
Push up to open the battery
cover
󾘥
󾘲
󾘥 󾘳󾘥Button
Button to lock the door manually
󾘲 󾘥 󾘳󾘥Button
Button to set double locking mode
󾘥
󾘥󾘥

[N], [S], [ ] Button
How to use [Safety switch]
The safety handle is
activated. (Red)
The safety handle is
deactivated. (green)
Operation of the handle inside is restricted for preventing outside intrusion.
Auto lock function / Auto relocking system
When the door is closed, it will be locked
automatically.
If the door is not opened within 7 seconds after
input PIN code or Card key it will be relocked
automatically to protect user`s property.
1. Auto lock function 2. Auto relocking system