Schmeiser Till an' Pak Guide

TILL AN’ PAK™
AND ACCESSORIES
OPERATION AND PARTS
MANUAL
T. G. SCHMEISER
Read and understand the manual. This manual provides information and procedures to
safely operate and maintain the Till An’ Pak
Version 2.0
July 2019
SCHMEISER

Copyright © 2019 T. G. Schmeiser Co., Inc. All rights reserved

Till An’ Pak™
Ph. [phone] 3 www.tgschmeiser.com
Fax [phone]
CONTENTS
INTRODUCTION............................................................4
Engineered for Long Life......................................4
Serial Number Information .......................................4
Replacement Parts...................................................4
Warranty Information................................................4
Serial Number Location............................................4
Factory Contact Information.....................................4
Dealer Contact Information......................................4
Till An’ Pak™ and Accessories............................5
SAFETY..........................................................................6
Safety Alert Symbols................................................6
Safety Icons Nomenclature......................................7
Personal Protection/Important Information.....7
Prohibited Actions...........................................7
Hazard Avoidance...........................................7
General Safety..........................................................8
Assembly Safety......................................................8
Operation Safety.......................................................9
Tractor Requirements.....................................9
Tractor Safety Devices.................................10
ROPS and Seat Belt.....................................10
Attaching to Tractor.......................................10
Maintenance Safety................................................11
Bolt Torque Requirements............................11
Welding Repairs............................................11
Storage Safety........................................................11
Disposal of Equipment at End of Useful Life.........11
SAFETY SIGNS AND DECALS...................................12
Safety Sign Placement.......................................12
Safety Signs and Decals......................................13
OPERATION.................................................................14
Attaching to Tractor................................................14
Initial Set Up Check List..........................................14
Implement Break-In................................................14
General Operating Instructions...............................14
Ring Roller Orientation.........................................15
Detaching From Tractor............................................15
MAINTENANCE...........................................................16
Maintenance Schedule...........................................16
Lubrication Points...................................................17
Ground Engaging Components..............................17
STORAGE....................................................................17
Storage Preparation...............................................17
Placing In Storage..................................................17
Removing From Storage...............................17
PARTS SECTION.........................................................18
Ordering Parts........................................................18
Till An’ Pak Assembly..........................................18
Smooth An’ Roll Assembly.....................................19
Till An’ Pak / Smooth An’ Roll Tongue...........................20
Till An’ Pak Accessories...........................................21
Float Assembly...............................................21
Squadron Arm Assembly................................22
3-Point Hitch CA 1&2................................23
3-Point Hitch CA 2&3................................24
LIMITED WARRANTY STATEMENT...........................25

Till An’ Pak™
www.tgschmeiser.com 4 Ph. [phone]
Fax [phone]
INTRODUCTION
Your Schmeiser Till An’ Pak (implement) is designed to
provide many years of dependable service.
This manual has been prepared to instruct the user in
and understand the manual thoroughly and follow all
instructions carefully.
Engineered for Long Life
Our products are engineered to work in conjunction with
other farm implements. The Till An’ Pak helps save time
and money when attached behind a plow or disc, seeder,
fertilizer spreader, or fumigator.
Serial Number Information
Record the serial number, model number, and date
purchased in the space provided in the Serial Number
Location section. Be sure to have this information
whenever contacting the dealer to order parts or
attachments for this implement.
Replacement Parts
Should this implement require replacement parts,
contact your local Schmeiser dealer. Always order
genuine Schmeiser OEM replacement parts.
Warranty Information
It is important that the Warranty Card be completed and
sent to Schmeiser. The warranty will not be valid until
not contained in this manual is needed, contact your
Schmeiser dealer.
Thank you for buying a Schmeiser Till An’ Pak.
Serial Number Location
Serial No. __________________________________
Model No. __________________________________
Date Purchased. _____________________________
Dealer Name. _______________________________
Factory Contact Information
For questions not answered in this manual, if additional
copies are required, or the manual is damaged, please
contact your local dealer or:
T. G. Schmeiser Co., Inc.
P.O. Box 1392
Selma, CA 93662
Phone: [phone]
Fax: [phone]
E-mail: [email protected]
Web: www.tgschmeiser.com
Additional copies of this manual can also be downloaded
at www.tgschmeiser.com.
Dealer Contact Information
For replacement decals, questions, or to order parts,
contact your dealer:

Till An’ Pak™
Ph. [phone] 5 www.tgschmeiser.com
Fax [phone]
TILL AN’ PAK™ AND ACCESSORIES