Schumacher Electric PS-1562A Installer manual

1.5 Amp Charger and Maintainer
Fully Automatic –once battery is charged, unit
switches from Full Charge to Float-Mode
Monitoring
Microprocessor Controlled & Auto Voltage
Detection
Automatic Temperature Compensation
Thermal Runaway Protection
Quick-Disconnect Harness
Utilize ring connector and only hook harness
up once
No need to remove battery again to charge
Both the 50-Amp clamp & ring connectors
snap into place in seconds
Reverse-Hookup Protection
LEDs -indicate Charging, Charged and Power
Portable –easy to store
DSR Pro-Series™ Maintainer
Model PS-1562A

DSR Pro-Series™ Mountable Maintainer
1.5-AMP Trickle Charge Rate -charges in 2
to 12 hours
Fully Automatic –once battery is charged, unit
switches from Full Charge to Float-Mode Monitoring
LED Lights - indicate Power On and Charged
Reverse-Hookup Protection
Molded Plastic Case
“On-Board” Features – comes complete with
hardware & bracket to mount charger next to battery
Short Leads for Safety –won’t get tangled in
moving engine parts
Model PSC-15A-OB

6-Amp Medium Charge –ideal for most
everyday needs, charges most batteries in 6 to
8 hours
2-Amp Trickle Charge –charges a small 12
volt battery in 2 to 12 hours
Manual Operation
Durable –metal case, proven performer
Top Mounted Carrying Handle
DSR Pro-Series™ Metal Hand-Held Battery Charger
Model PS-620
10-Amp Fast Charge –perfect for everyday charging
needs. Charges in 3 to 5 hours
2 amp Trickle Charge –charges a small 12 volt battery in
2 to 12 hours
Fully Automatic/ Manual Operation
LED –signals Fully Charged
Flexible Function –select automatic or manual function
Rugged –durable metal case
Top Mounted Carrying Handle
Model PS-1022MA

50-Amp Engine Start –for emergency starting
10-Amp Fast Charge –good for everyday charging
needs. Charges in 3 to 5 hours
2-Amp Trickle Charge –charges a small 12 volt battery in
2 to 12 hours
Manual Operation
Rugged –durable metal case, solid performer
Top Mounted Carrying Handle
DSR Pro-Series™ Metal Battery Charger/Starter
Model PS-1025
100-Amp Engine Start –for emergency starting
15-Amp Fast Charge –charges a battery in 2 to 4
hours
2-Amp Trickle Charge –charges a small
12 volt battery in 2 to 12 hours
Fully Automatic/ Manual Operation
2 LEDs –signals Full Charge and
Check Battery
Fully Automatic –will not overcharge batteries
Rugged –durable metal case
Top Mounted Carrying Handle
Model PS-2100MA

200-Amp 12V Engine Start –for
emergency starting
30-Amp 6V & 12V Charge –for very fast
charging - charges in 1 to 3 hours
10-Amp 12V Fast Charge –for everyday
charging needs –charges in 3 to 5 hours
Manual Operation
Extra Long 9-Foot Power Cord–120V
line cord for extended reach
6-Foot, 4 Gage TPE Welding Grade
Battery Cables –with epoxy coated 400-
Amp steel clamps and copper jaws
5-Function Rotary Power Switch
2 1/4 Hour Timer
300-Amp Clamps
DSR Pro-Series™ Specialty Hand-Held Battery Charger
Model PSC-2030T
Fully Automatic
Microprocessor Controlled –fully automatic
battery charger/maintainer with float mode
monitoring
6-Foot Power Cord and Output Cables –
provide a 12-foot reach
Durable, Ventilated, Heavy-Gauge Steel
Case –with baked enamel finish.
AGM Series –for valve-regulated 16V
batteries
Model PSC-2516A

125-Amp Engine Start –for quick starting
15<>40-Amp Fast Charge
2-Amp Slow Charge –for charging small batteries,
warming large ones
Fully Automatic
Float-Mode Monitoring –keeps battery at optimum
charge level by providing just enough power to keep
the battery maintained at the proper voltage and starts
automatically after charging in all charge rates
Battery and Alternator Tester –helps diagnose
electrical system problems and battery state
All-Steel Clamps –for top and side-mount battery
posts
Reverse Hook-Up Protection –charger will not
operate if clamps are reversed on battery terminals
Safe-Start Feature
DSR Pro-Series™ Hybrid Hand-Held Battery Charger/Starter
Model PSC-12500A

200-Amp Engine Start –for emergency starting
35-Amp Rapid Charge –charges in 1 to 3 hours
2-Amp Trickle Charge –charges a small 12V
battery in 2 to 12 hours
Manual Operation
“Off” Position Switch
Rugged –durable metal case
DSR Pro-Series Wheel-Style Battery Charger/Starter
Model PSW-2035

Manual Operation
135 Minute Timer with “Hold” Position – for precise control of the
charge duration, charger shuts off after timer expires
Extra Long 9-Foot Power Cord–120V line cord for extended reach
6 ft, 4 ga, TPE Welding Grade Battery Cables –with epoxy coated
400-Amp steel clamps and copper jaws
Durable Construction with Tubular Chrome Handle
Large Face, Clear View Meters –are easy to read
Heavy Duty Voltage and Rate Control Switches
Fiber Glass Rod –for clamp storage
Rugged –durable metal case with powder coat finish
DSR Pro-Series™ Heavy-Duty Wheel-Style Battery Charger/Starter
Model PSW-2550
250-Amp 12V/125-Amp 6V
Engine Start –for emergency
engine starting
50-Amp Rapid Charge 6/12V –
charges a battery in 1/2 to 2 hours
10-Amp Charge 12V –charges in
2 to 5 hours
Model PSW-3060
300-Amp 12V/200-Amp 6V Engine
Start –for emergency starting
60-Amp Rapid Charge –charges a
battery in 1/2 to 2 hours
30-Amp Fast Charge –charges in 1
to 3 hours
On-Board Battery Load Tester –tests
50-Amps on a 6V system, 100-Amps
on a 12V system
Model PSW-61224
250-Amp 12V/180-Amp 6V/200-Amp 24V
Engine Start –for emergency starting
65-Amp 12V/80-Amp 6V/30-Amp 24V
Rapid Charge –charges a battery in 1/2 to
2 hours
35-Amp 12V/40-Amp 6V Medium Charge –
charges a battery in 1 to 3 hours
5-Amp 12V/10-Amp 24V Charge for
Normal Charging –charges in 3 to 5 hours

Manual Operation
Durable Construction with Tubular
Chrome Handle
Large Face, Clear View Meters –are
easy to read
Ammeter
High Efficiency Fan Cooling System
Heavy Duty Voltage and Rate Control
Switches
Automatic Overload Reset/ Short
Circuit Protection
Rugged –durable metal case with
powder coat finish
DSR Pro-Series™ Heavy-Duty Wheel-Style Battery Charger/Starter
Model PSW-7700
300-Amp 12V Engine Start –for
emergency starting
70-Amp Rapid Charge –charges a
battery in 1/2 to 2 hours
35-Amp 24V/ 30-Amp 12V Fast Charge
–charges in 1 to 3 hours
15-Amp 12V Medium Charge –charges
a battery in 1 to 3 hours
Voltmeter
2 Hour Timer
4 Gauge, 9 Ft. Output Cable
UL Outdoor Approved/CUL Approved
Model PSW-22
225-Amp 12V/125-Amp 6V
Engine Start –for emergency
starting
40-Amp 12V/6V Fast Charge –
charges a battery in 1 to 3 hours
20-Amp 12V Medium Charge –
charges a battery in 1 to 3 hours
2-Amp 12V Normal Charging –
charges in 3 to 5 hours
Fiber Glass Rod –for clamp
storage
2.25 Hour Timer
6 Gauge, 7 Ft. Output Cable
UL Approved

DSR Pro-Series™ Battery/Charging System Analyzer
Model PST-100
•100 Amp Digital Battery Tester
•Microprocessor Controlled
•CCA Range 200-1200
•Operating voltage range 8 to 16V
•An easy-to-read digital display & user prompts to
ensure simple & accurate operation
•Field proven, high quality design for long life
•Research based diagnostic algorithm provides
accurate assessment of the battery &
recommended action to the user