Schwinn 420 Elliptical 2012 model User manual

ASSEMBLY MANUAL / OWNER’S MANUAL
Manual en Español Latino Americano:
http://www.schwinnfitness.com

2
Nautilus, Inc., (800) NAUTILUS / [phone], www.NautilusInc.com - Customer Service: North America
[phone], [email protected] | outside U.S. +01-360-859-5180, [email protected] |
Printed in China | © 2011 Nautilus, Inc., All rights reserved. ™ and ® indicate a trademark or registered
trademark. Nautilus, Inc. (www.NautilusInc.com) trademarks include NAUTILUS®, BOWFLEX®, SCHWINN®
and UNIVERSAL® and respective logos. Other trademarks are the property of their respective owners.
TABLE OF CONTENTS
Important Safety Instructions - Assembly 3
Safety Warning Labels / Serial Number 4
Specifications 5
Before Assembly 5
Parts 6
Hardware 7
Tools 7
Assembly 8
Leveling the Machine 18
Moving the Machine 18
Important Safety Instructions - Owner’s 19
Features 20
Console Features 21
Contact Heart Rate (CHR) 23
Operations 25
Adjustments 25
Initial Setup 25
Quick Start / Manual Program 26
Workout Program Selection 26
User Setup Mode 26
Custom Workout 28
Profile Programs 29
Fitness Test 30
Results/Cool Down Mode 30
Pausing or Stopping 31
User Statistics 31
Console Setup 32
Maintenance 33
Troubleshooting 35
To validate warranty support, keep the original proof of purchase and record the following information:
Serial Number __________________________
Date of Purchase ____________________
To register your product warranty , go to: www.SchwinnFitness.com/register
Or call 1 (800) 605–3369.
If you have questions or problems with your product, please call 1 (800) NAUTILUS (628–8458).

3
!This icon means a potentially hazardous situation which, if not avoided, could result in death
or serious injury.
Obey the following warnings:
!Read and understand all warnings on this machine.
Carefully read and understand the Assembly instructions.
• Keepbystandersandchildrenawayfromtheproductyouareassemblingatalltimes.
• Donotconnectpowersupplytothemachineuntilinstructedtodoso.
• Donotassemblethismachineoutdoorsorinawetormoistlocation.
• Makesureassemblyisdoneinanappropriateworkspaceawayfromfoottrafcandexposure
to bystanders.
• Somecomponentsofthemachinecanbeheavyorawkward.Useasecondpersonwhendoing
the assembly steps involving these parts. Do not do steps that involve heavy lifting or awkward
movements on your own.
• Setupthismachineonasolid,level,horizontalsurface.
• Donottrytochangethedesignorfunctionalityofthismachine.Thiscouldcompromisethe
safety of this machine and will void the warranty.
• IfreplacementpartsarenecessaryuseonlygenuineNautilus®replacementpartsandhardware.
Failure to use genuine replacement parts can cause a risk to users, keep the machine from
operating correctly and void the warranty.
• Donotuseorputthemachineintoserviceuntilthemachinehasbeenfullyassembledand
inspected for correct performance in accordance with the Manual.
• ReadandunderstandthecompleteManualsuppliedwiththismachinebeforerstuse.Keepthe
Manual for future reference.
• Doallassemblystepsinthesequencegiven.Incorrectassemblycanleadtoinjuryorincorrect
function.
IMpORTANT SAFETY INSTRUCTIONS
— ASSEMBLY

4
•
•
•
•
•
•
300lbs. (136kg).
•
•
•
•
•
•
SAFETY WARNING LABELS AND
SERIAL NUMBER
FCC Compliance
!Changesormodicationstothisunitnotexpresslyapprovedbythepartyresponsiblefor
compliancecouldvoidtheuser’sauthoritytooperatetheequipment.
The machine and power supply comply with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.
Note: This machine and power supply have been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation.
Thisequipmentgenerates,usesandcanradiateradiofrequencyenergyand,ifnotinstalled
and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If
thisequipmentdoescauseharmfulinterferencetoradioortelevisionreception,whichcanbe

5
Before Assembly
Select the area where you are going to set up and operate your machine. For safe operation, the
locationmustbeonahard,levelsurface.Allowaworkoutareaofaminimum74”x130”(1.9mx
3.3m).
Basic Assembly Tips
Follow these basic points when you assemble your machine:
1. Read and understand the “Important Safety Instructions” before assembly.
2. Collect all the pieces necessary for each assembly step.
3. Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten,
and the left (counterclockwise) to loosen, unless instructed otherwise.
4. When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt
through the holes.
5. Theassemblyrequires2people.
Note:Someaxlescontainoil.Usecautiontoavoidstainingclothesorcarpet.
SpECIFICATIONS
71”
(180.3 cm)
26” (66 cm)
62” (157.5 cm)
Maximum User Weight: 300 lbs. (136 kg)
Power Requirements:
Operational Voltage: Operational Voltage 9VDC
Operating Current: 1500 mA
Regulatory Approvals:
AC Power Adapter: UL listed, CSA certified (or
equivalent),Rated120V60Hz
Input, 9VDC, 1500mA Output.
Class 2 or LPS.
determinedbyturningtheequipmentoffandon,theuserisencouragedtotrytocorrectthe
interference by one or more of the following measures:
•Reorientorrelocatethereceivingantenna.
•Increasetheseparationbetweentheequipmentandreceiver.
•Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiveris
connected.
•Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

6
Item Qty Description Item Qty Description
1 1 Main Frame 12 1 Upper Right Handlebar Arm
2 2 Pedal Mount Plate 13 1 Upper Left Handlebar Arm
3 1 Rear Stabilizer 14 1 Lower Left Handlebar Arm
4 1 Front Stabilizer 15 1 Lower Right Handlebar Arm
5 1 Console Mast 16 1 Static Handlebar
6 1 Transport Handle 17 1 Console
7 2 Rail 18 1 Mast Boot
8 1 Right Pedal 19 1 AC Adapter
9 1 Left Pedal 20 1 Arm Pivot Rod
10 1 Right Leg 21 1 Water Bottle Holder
11 1 Left Leg 22 1 Media Support
1
19
18
17
16
20
2
3
4
5
6
7
8
9
11
10
12
13
14 15
21
22
pARTS

7
Item Qty Description Item Qty Description
A 4 Wide Flat Washer M8 I 17 ButtonHeadHexScrewM8x15
B 41 Lock Washer M8 J 2 Leveler Washer
C 41 Flat Washer M8 K2 Leveler Screw
D 4 HexHeadBoltM8x20 L 4 Cap
E 2 ButtonHeadHexScrewM8x25
Thread Lock
M 2 Cotter Pin
F 4 Lock Washer, Black M8 N 2 Wave Washer
G 20 ButtonHeadHexScrewM8x20 O 2 PhillipsHeadScrewM5x25
H 2 ButtonHeadHexScrewM8x20
Thread Lock
A B C D E F G H I
J LK M N O
6 mm
HARDWARE / TOOLS
Tools
Included Not Included
(recommended)

8
1. Attach Rear Stabilizer and Transport Handle to Rails
2. Attach Rail Assembly and Front Stabilizer to Frame
ASSEMBLY
C
6 mm
X8
BI
K
J
X2
7
7
3
6
C
6 mm
X8
B
G
1
4

9
3. Attach Console Mast to Frame Assembly
NOTICE: Align the clips on the cable connectors and make sure the connectors lock. Do not
crimp the Console Cable.
18
5
I
6 mm
X5
CB

10
G
6 mm
X4
C
B
16
4. Attach the Static Handlebar
NOTICE: Do not crimp the Console Cable.