PART NO.
FIT KITS
DB-Killer
BIKE
YEAR
NOTES
scorpion-exhausts.com
FITTING INSTRUCTIONS 1/3
NOTE: ENSURE SCORPION SYSTEM IS CLEAR OF MOVING PARTS AND ALL ORIGINAL FUNCTIONS WORK CORRECTLY.
1Serket Silencer RSC274
2 47-51mm Band Clamp (Z016.10003)
3 Connecting Pipe CP718
4 2 x Rubber Coated Springs (Z028.10030)
5 Bracket (Z015.31031)
6 2 x M8x17mm Washers (Z017.10831)
7 2 x M8 Nyloc Nuts (Z017.10062)
8 M8x25mm Cap Head Bolt (Z017.10073)
9 Alloy Bolt Finisher (Z026.20068) E-MARK TR-63 e4 2361 9
ISSUE NO. 01
DATE 22/10/2018
AUTHORISED J.Harkin
CHECKED
Triumph Daytona 675 / Daytona 675 R
2013-16
Use standard ttings where not supplied
Remove standard gasket if tted.
RTR-75
Z039.20486
SCEXDBK23 - (Type V)
Box:PLOCK 1
A) Remove original exhaust from
bike including servo motor and
cable (see next page) taking care
to keep all original components in
a safe place.
B) Ret Scorpion exhaust as per
line diagram above.
C) When tted take bike for a short
ride to ensure all functions are
correct.
D) When bike & exhaust are cool
enough check all nuts and bolts
are still secure.
