Scosche TA2121B User manual

4
Kit Assembly
Step 6
Mount and screw the assembly into the dash cavity, then reassemble
everything in reverse order to complete the installation.
INSTALLATION GUIDE Kit Assembly Continued TA2121B
IN-DASH INSTALLATION KIT FOR
2016-UP TOYOTA TACOMA VEHICLES EQUIPED
W/ PREMIUM STEREO
This premium installation kit is for 2016-UP Toyota Tacoma vehicles with premium model radio. Included are all the parts
you need to mount your car stereo or CD player into your vehicle’s dash. Refer to individual instruction in this manual to
remove your vehicles factory radio and assemble the kit.
PRT (Panel Removal Tool)
Screwdriver
TA2121B 02/16TA2121B 02/16
7746 Left Bracket
7745 Right Bracket
TA2121B Face Panel
6552 Pocket

23
INSTALLATION GUIDE INSTALLATION GUIDE
Disassembly
Disassembly
Disassembly
Disassembly
Kit Assembly
Kit Assembly Continued
Step 2
Step 1 Step 5
Step 3
Step 4
Remove (4) screws securing
the radio in place (circled).
Using a PRT (Panel Removal
Tool) remove the air vent duct
panel surrounding the OEM
radio unit (dashed highlighted
area)
Unplug all wiring
Remove radio from the dash cavity
and unscrew brackets from the
OEM radio
1. Attach the pocket provided onto TA2121B face panel using the screws provided.
2. Attach LEFT and RIGHT brackets onto the face panel pocket assembly
3. Place and secure single DIN radio onto the assembly, screw brackets to the radio
(Not shown inf gures).
1. Attach LEFT and RIGHT brackets onto the face panel.
2. Secure double DIN radio onto the assembly, screw brackets to the radio unit (Not
shown in gures).
DOUBLE DIN RADIO
SINGLE DIN RADIO
Single DIN Exploded View (Pocket)
Double DIN Exploded View
Single DIN Assembled View (Pocket)
Double DIN Assembled View
NOTE: When mounting both brackets to the
radio unit only use “A” screw locations only!
Bracket Side View
TA2121B 02/16TA2121B 02/16