Scosche Fundr CHRG-Q3 User manual

Fyndr®CHRG-Q3
6.4A 3 USB with Qualcomm 3.0
Car Charger + Smart Car Finder
Powered By

Fyndr®CHRG-Q3
01 Contents
02 Introduction
03 Before using Fyndr®
04 Inside The Box
Fyndr® Speciications
Fyndr® Overview
05 Fyndr® Features
06-07 Charging With Fyndr®
08-14 Using The Fyndr® App
14-15 Troubleshooting
16-17 Warranty Terms & Conditions
Change the way
you charge.
Find your parked
car, instantly.TM

Fyndr®CHRG-Q3
01
Contents

Fyndr®CHRG-Q3
02
Introduction
Introduction
We would like to thank you for purchasing
Fyndr®.
Featuring 3 USB ports (including one
Qualcomm 3.0 port) with a total output
of 6.4A, Fyndr® can rapidly charge up to
three devices simultaneously. A sleek design
with an internal Smart IC system, Fyndr®
provides stable charging on the go. Pair
it with the Fyndr® app to never lose your
parked car again.
Ideal for charging:
Tablets Smartphones Cameras
Powerbanks MP3/4 Players
Note: Always check your electronic device’s
compatibility before using Fyndr®.

Fyndr®CHRG-Q3
03
Before using Fyndr®
Before using Fyndr®
• Please read this manual carefully in
its entirety before using Fyndr® as it
contains some important information.
• Improper use of Fyndr® may result
in damage to Fyndr® and/or your
connected electronic devices.
• Ensure correct voltage is used with
Fyndr® as continuous excessive voltage
could damage any connected electronic
devices. Fyndr® is operable with a DC
12-24V input voltage.
• Do not use Fyndr® with electronic
devices requiring more amperage /
voltage than indicated.
• Do not attempt to dismantle Fyndr®.
• To keep Fyndr® working at its optimum
performance, avoid use in moist or
wet conditions, high temperature
environments and in direct sunlight.
• Avoid contact with chemical solvents.

04
Inside The Box
Inside The Box
• Fyndr® Car Charger
• User Guide
Note: Charging cables are not included
Fyndr® Speciications
Model no. CHRG-Q3
Input: DC 12-24V
Total Output: 5V DC, 6.4A max
Output 1: USB QUALCOMM 3.0: 3A
Output 2: USB 1A
Output 3: USB 2.4A with smart IC
Protection: Over current, short circuit, and
over temperature protection.
Fyndr® Overview
1. USB charging port: QC3.0 3A max
2. USB charging port: 1A max
3. USB charging port: 2.4A max
4. Positive electrode
5. Negative electrode
Fyndr®CHRG-Q3

05
Fyndr® Features
Fyndr® Features
• Wear resistant, soft touch inish
• Stainless steel spring clips for added
durability.
• Bilateral stainless steel spring buckle
design for extra stability.
• Constructed with ire retardant
materials.
• Integrated with Bluetooth Smart IC.
• Find your parked car with Fyndr® app –
available for Android and iOS on Apple
Apps and Google Play.
Fyndr®CHRG-Q3
3
2
1
5
4

Charging With Fyndr®
1. Insert Fyndr® into your vehicle’s 12V
power socket. Green LED lights
embedded within the USB ports
will lash indicating Fyndr® is now
operational and ready to charge your
electronic devices.
2. Use any of the 3 USB ports to charge
your mobile, tablet or any other USB
electronic device. Qualcomm 3.0 allows
for rapid charging of up to 3A for
compatible devices*.
3. When all 3 USB ports are used
simultaneously for charging, the
maximum total combined output is
5V, 6.4A
4. Fyndr® is equipped with an intelligent
Smart IC chip which monitors and
regulates charging to preserve your
electronic device’s battery life. It
automatically charges devices at their
optimal rate, cutting charging times
without damaging your battery.
06
Charging With Fyndr®
Fyndr®CHRG-Q3

07
Charging With Fyndr®
Here’s a tip – If your electronic device has
minimal power remaining, turn it off whilst
using Fyndr® to maximise the charging
speed. Turning off electronic devices whilst
charging reduces power consumption to
virtually nil whilst plugged in, increasing
their rate of charge.
*Refer to Troubleshooting (Pages 14-15)
for more information about compatible
devices.
Fyndr®CHRG-Q3

08
Using The Fyndr® App
Fyndr®CHRG-Q3
Using The Fyndr® App
1. Download Fyndr® app from the App
Store or Google Play store.
2. Open Fyndr® app, insert your Fyndr®
charger into your car’s 12V power
socket then start the engine.
3. Fyndr® is ready to connect. Please
ensure Bluetooth and GPS is enabled on
your smart phone.
4. The Fyndr® app will search for
your Fyndr® car charger and will
automatically connect (Fig.01 & 02).
5. When you park your car, the Fyndr®
app will automatically save your car’s
location .
6. When you need to ind your car, open
Fyndr® app and follow the arrow in the
Compass screen or view in the Map
screen (Fig.03).