
INSTRUCTIONS FOR
AIR COMPRESSOR 12V HEAVY DUTY
MODEL NO: MAC2300
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURYAND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
WARNING! Read operation instructions before use. Suitable for 12V operation only.
8DO NOTleave the unit unattended while in operation.
9 Checkcapacityandmaximuminationpressureofinatablebeforecommencingination.
9 Monitorthepressuregaugewhileinoperation.
9 Thegaugeshouldbeusedasanindicationofpressureonly.Werecommendtheuseofadialpressuregaugefordenitivereading.
9Locate compressor on an appropriate surface for use.
WARNING!Thiscompressoriscapableofproducingahighpressure.DO NOTinateanyitembeyonditsmaximum
capacity.
9 The12Vauxiliaryplugmustnotbesubstitutedwithanyothertypeofplugorelectricalsupply.
8DO NOTdirectinationhoseconnectorheadatyourself,othersoranimals.
8DO NOTcarrybythehose,oryankthehosefromaninationvalve.
8DO NOTpull the power cable from the vehicle accessory socket by the power lead.
8DO NOTgetthecompressorwetoruseintherain.
8DO NOTusethecompressorforataskitwasnotdesignedtoperform.
8DO NOToperatethecompressorwhenyouaretired,undertheinuenceofalcohol,drugsorintoxicatingmedication.
8DO NOToperatethecompressorifanypartsaremissingasthismaycausefailureorpossiblepersonalinjury.
8DO NOTopen the unit.
9 Keepchildrenandnonessentialpersonsawayfromtheinationarea.
9 Keepthecompressorcleanandingoodcondition.
9 Replaceorrepairdamagedparts.Userecommendedpartsonly.Nonauthorisedpartsmaybedangerousandwillinvalidatethe
warranty.
2. INTRODUCTION
Housedinruggedcompositecase.Suitableforinflatingtyresoncars,vansand4x4s.Poweredbyareliable,heavy-dutymotor.Integralgauge
readsupto20bar/300psi.Suppliedwithplugforuseinvehicleaccessorysocket.Accessorykit,containingPrestatypeadaptor,ballspikeandtwo
inflatableadaptorsincludedinstoragecompartment.
3. SPECIFICATIONe
Model no:...................................................................MAC2300
Hoselength: ..................................................................900mm
Powercordlength: ............................................................ 4mtr
Airflow:..........................................................................0.75cfm
Max.workingpressure: ..................................................200psi
Max. pressure:................................................................300psi
Operatingvoltage: ..............................................................12V
Typical inflation time:..............0-30psiin3.38min(175/70R13)
4. OPERATION
WARNING! Ensure you have read and understood the safety instructions.
4.1. Placethecompressoronasound,flatsurfaceensuringthattheinflationairhosecanreachthetyrevalve.
4.2. Pushtheuniversalquick-connectorfullyontotheinflationvalvestem,andlockwiththeconnectorlever.
IMPORTANT: Inflation will only be effective if the connector head is fully fitted and locked onto the valve.
4.3. Checkthepressuregaugetodeterminetheamountofpressurealreadyinthetyre.Thegaugecanbeusedwithoutswitchingtheuniton.
Werecommendhowevertheuseofadialpressuregaugeforadefinitivereading.
4.4. Checkthatthecompressoron/offswitchisintheoffpositionandplugthecompressorintothevehicleaccessorysocket.
4.5. Switchthecompressoron.Viewthepressuregaugetodeterminewhenthecorrectpressurehasbeenachieved.Switchthecompressor
off to stop the supply of air.
4.6. Unlockandremovethequick-connectorfromtheinflationvalve,ensuringyoudonotloseanyairintheprocess.
Replacethedustcapontothevalve.Whenyouhavefinishedusingthecompressor,disconnectitfromthevehicleaccessorysocketand
storeitinasafe,drylocation.
MAC2300|Issue:6(L)23/08/17
Original Language Version
© Jack Sealey Limited
Refer to
instruction
manual