
TYRE INFLATOR/AIR COMPRESSOR
12V HEAVY DUTY
MODEL NO: MAC2300
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
WARNING! Read operation instructions before use. Suitable for 12V operation only.
8DO NOT leave the unit unattended while in operation.
9 Checkcapacityandmaximuminationpressureofinatablebeforecommencingination.
9 Monitorthepressuregaugewhileinoperation.
9 Thegaugeshouldbeusedasanindicationofpressureonly.Werecommendtheuseofadialpressuregaugefordenitivereading.
9Locate compressor on an appropriate surface for use.
WARNING!Thiscompressoriscapableofproducingahighpressure.DO NOTinateanyitembeyonditsmaximum
capacity.
9 The12Vauxiliaryplugmustnotbesubstitutedwithanyothertypeofplugorelectricalsupply.
8DO NOTdirectinationhoseconnectorheadatyourself,othersoranimals.
8DO NOTcarrybythehose,oryankthehosefromaninationvalve.
8DO NOT pull the power cable from the vehicle accessory socket by the power lead.
8DO NOTgetthecompressorwetoruseintherain.
8DO NOTusethecompressorforataskitwasnotdesignedtoperform.
8DO NOToperatethecompressorwhenyouaretired,undertheinuenceofalcohol,drugsorintoxicatingmedication.
8DO NOToperatethecompressorifanypartsaremissingasthismaycausefailureorpossiblepersonalinjury.
8DO NOT open the unit.
9 Keepchildrenandnonessentialpersonsawayfromtheinationarea.
9 Keepthecompressorcleanandingoodcondition.
9 Replaceorrepairdamagedparts.Userecommendedpartsonly.Nonauthorisedpartsmaybedangerousandwillinvalidatethe
warranty.
2. INTRODUCTION
Housedinruggedcompositecase.Suitableforinflatingtyresoncars,vansand4x4s.Poweredbyareliable,heavy-dutymotor.Integralgauge
readsupto20bar/300psi.Suppliedwithplugforuseinvehicleaccessorysocket.Accessorykit,containingPrestatypeadaptor,ballspikeandtwo
inflatableadaptorsincludedinstoragecompartment.
3. SPECIFICATIONe
Model no:...................................................................MAC2300
Hoselength: ..................................................................900mm
Powercordlength: ...............................................................4m
Max. pressure:................................................................ 200psi
Operatingvoltage: .............................................................. 12V
Max. current ........................................................... 10A@40psi
Typical inflation time: .............. 0-30psiin3.38min(175/70R13)
Weight ............................................................................2.24kg
4. OPERATION
WARNING! Ensure you have read and understood the safety instructions.
4.1. Placethecompressoronasound,flatsurfaceensuringthattheinflationairhosecanreachthetyrevalve.
4.2. Pushtheuniversalquick-connectorfullyontotheinflationvalvestem,andlockwiththeconnectorlever.
IMPORTANT:Inflationwillonlybeeffectiveiftheconnectorheadisfullyfittedandlockedontothevalve.
4.3. Checkthepressuregaugetodeterminetheamountofpressurealreadyinthetyre.Thegaugecanbeusedwithoutswitchingtheuniton.
Werecommendhowevertheuseofadialpressuregaugeforadefinitivereading.
4.4. Checkthatthecompressoron/offswitchisintheoffpositionandplugthecompressorintothevehicleaccessorysocket.
4.5. Switchthecompressoron.Viewthepressuregaugetodeterminewhenthecorrectpressurehasbeenachieved.Switchthecompressor
off to stop the supply of air.
4.6. Unlockandremovethequick-connectorfromtheinflationvalve,ensuringyoudonotloseanyairintheprocess.
Replacethedustcapontothevalve.Whenyouhavefinishedusingthecompressor,disconnectitfromthevehicleaccessorysocketand
storeitinasafe,drylocation.
Original Language Version
© Jack Sealey Limited
Refer to
instruction
manual
Keep away
from rain
MAC2300|Issue:7(1)11/03/19