Sealey APMS20 User manual

MODULAR FLOOR CABINET MULTIFUNCTION
775MM HEAVY-DUTY
MODEL NO: APMS20
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this storage
system.
9Locate in a suitable work area.
9Keep the work area clean, uncluttered and ensure there is adequate lighting.
WARNING! Use storage on level and solid ground, preferably concrete.
9Keep the storage system clean and tidy in accordance with good workshop practice.
9Keep children and unauthorised persons away from the work area.
8DO NOT use the storage system for any purpose other than that for which it is designed.
8DO NOT use the storage system outdoors.
8DO NOT place the storage system in a damp or wet location or an area where there is condensation.
8DO NOT clean the storage system with any solvents which may damage the surfaces or the protective coating.
8DO NOT move the storage system when there are items placed inside.
8DO NOT step on the shelves.
8DO NOT overload the storage system.
2. INTRODUCTION
Heavy-duty high end Modular Garage Storage System with an appearance to enhance any garage or workshop. Built to withstand the rigors
of any garage environment. Versatile and durable steel construction that will last for years. Easily adjusts to specic needs; purchase a single
base cabinet or create a full garage storage system.
3. SPECIFICATION
MODEL NO:........................................................... APMS20
Overall Size (W x D x H): ........................775 x 610 x 945mm
X-Large Drawer (x1): ..............................400 x 550 x 280mm
Rubbish Bin: ...........................................200 x 485 x 380mm
Nett Weight: ..............................................................54.50Kg
4. ASSEMBLY
APMS20 Issue 2 (HF) 15/03/19
Original Language Version
© Jack Sealey Limited
Refer to
instructions
Wear protective
gloves

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 01284 703534 [e-mail] www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
No. Description Quantity
1Work top 1
2M4.8x25 hex flange bolt 4
3Slide (R) 2
4Adjustable feet 4
5M6x12 cross head bolt 2
6Skirting board 1
7Rubbish bin 1
8Drawer liner 1
9Slide (L) 2
10 Hanging tube 1
APMS20 Issue 2 (HF) 15/03/19
Original Language Version
© Jack Sealey Limited